Chemicals

Apr, 2019 | 185 pages

Butyric acid derivatives, also known as butyrate or butanoate, are salts or esters of butyric/butanoic acid. Sodium butyrate, calcium butyrate, potassium butyrate, magnesium butyrate, and tributyrin are some of butyric acid derivatives. Of these, sodium and calcium butyrate are predominantly used in animal feed products. Butyric acid derivatives are primarily offered in micro-encapsulated form for controlled release of butyrate in animal colon. Butyric acid salts are mainly used to boost animal colon and gastrointestinal health, and increase the overall meat yield from the animal. 

Apr, 2019 | 235 pages

 Plant sterols, known commonly as phytosterols, are plant-derived compounds that are structurally related to cholesterol. Commercially, phytosterols are obtained from vegetable oils and tall oils. These oils undergo different purification processes so as to yield a pure form of phytosterols.

Apr, 2019 | 243 pages

Matting agents help control the gloss of the surface on which they are applied. These agents are fine particles that are dispersed in paint and coating formulations in such a way that they scatter the light falling on the surface in a desired, defined manner. This helps achieve matte finish or reduce the gloss of the surface on which they are applied. 

Apr, 2019 | 173 pages

Povidone iodine (iodopovidone and PVP-I) is synthesized by the blend of polyvinylpyrrolidone (povidone, PVP) and elemental iodine to form a stable complex. According to the U.S. Pharmacopeia, povidone iodine is a complex of iodine with povidone. It contains not less than 9.0% and not more than 12.0% of available iodine (I), calculated on the dried basis. 

Apr, 2019 | 320 pages

Gravure inks are fluid inks with very low viscosity. This allows them to be drawn into engraved cells in cylinders and then transferred onto substrates. In order to dry the ink and drive off the solvents or water, the paper is run through gas fired or electric fired driers. These inks dry before the paper reaches the next printing station on the press. This is necessary as wet inks cannot be overprinted without smearing and smudging. Therefore, high volume air dryers are placed after each printing station.

Apr, 2019 | 277 pages

This report analyzes and forecasts the biostimulants market at the global and regional levels. The market has been forecast based on revenue (US$ Mn) and volume (kilo tons) from 2019 to 2027. The study includes drivers and restraints of the global biostimulants market. It also covers the expected impact of these drivers and restraints on the demand for biostimulants during the forecast period. The report also highlights opportunities for the biostimulants market at the global and regional levels.

Apr, 2019 | 256 pages

Silicon alloys have significant amount of silicon present in them. They have silicon as a major element in them. Silicon alloys are produced from sand or silica in submerged electric arc furnace along with coke and iron at very high temperatures. Silicon alloys are widely used in the manufacturing of steel and cast iron. Addition of these alloys in materials can improve the corrosion resistance and high temperature heat resistance properties of the material.

Apr, 2019 | 336 pages

Powder coatings are 100% solid coatings that comprise a homogeneous blend of polymers, pigments, and additives produced in the form of a fine powder. They are solvent-free and provide durable and attractive finishes. The coatings are applied with the help of a spray gun, which imparts an electrical charge on the powder particles and directs them toward the object to be coated. Powder coatings are used to provide a protective and decorative finish. They are available in a wide range of colors and textures.

Apr, 2019 | 366 pages

This report analyzes and forecasts the ink additives market at the global and regional levels. The market has been forecast based on volume (kilo tons) and revenue (US$ Mn) from 2018 to 2026, considering 2017 as the base year. The study includes drivers and restraints of the global ink additives market. It also covers impact of these drivers and restraints on the demand for ink additives during the forecast period. The report also highlights opportunities for the ink additives market at the global and regional levels.

Apr, 2019 | 166 pages

Anti-icing coatings are hydrophilic coatings that are applied on surfaces exposed to cold environments to prevent the buildup of ice or snow. Ice buildup is a common issue in several countries. Aircraft, power utility, telecommunication lines, wind mills, solar panels, electric equipment, and utilities such as heat exchangers in chemical plants experience damage caused by icing. Icing or accumulation of ice caused by freezing of liquid on a surface hampers the functioning of systems.

Apr, 2019 | 358 pages

Lubricants are organic substances that are used to reduce friction and heat between moving surfaces that are in mutual contact. Lubricants prevent corrosion; reduce contamination; protect seal; transmit power; and control temperature. The lubricants are available in various forms such as liquid, solid, semi-solid, and gaseous. The global lubricants market has been segmented in terms of type, product, and application.

Mar, 2019 | 300 pages

Petrochemical-derived products such as carbon black, solvents, resins, mineral oils, and intermediates are used as key raw materials in the production of flexographic inks. Flexographic printing is an important printing process used in flexible package printing. Its popularity can be attributed to its high versatility in terms of printing on a wide range of substrates.

Mar, 2019 | 302 pages

Sulfur hexafluoride is a non-toxic inert gas that is widely used for insulation and cooling application in the electric & power industry owing to its superior thermal stability and excellent dielectric strength. Sulfur hexafluoride has key applications in electric power transmission and distribution systems such as gas insulated switchgear (GIS), circuit breakers (CBs), and load break switches due to properties of electrical insulation and arc interruption capability.

Mar, 2019 | 300 pages

Paints & coatings are substances that are applied on a substrate to decorate and protect the surface. Paints and coatings are widely employed for decorative purposes. When used for decorative purposes, they improve durability and esthetic appeal of the surface. They provide protection to the surface from factors such as environmental conditions, weathering, rust, and chemical resistance.

Mar, 2019 | 381 pages

Redispersible polymer powder is used in all types of dry-mix mortars such as wall putty powders, ceramic tile adhesives, ceramic tile jointing agents, dry powder interface agents, exterior insulation mortars, self-leveling mortars, mending mortars, decorative mortars, and waterproof mortars.

Mar, 2019 | 235 pages

This report analyzes and forecasts the lithography inks market at the global and regional levels. The market has been forecast in terms of volume (kilo tons) and value (US$ Mn) from 2018 to 2026. The study includes drivers and restraints of the global market. It also encompasses the impact of these drivers and restraints on the demand for lithography inks during the forecast period.

Mar, 2019 | 300 pages

Petrochemical-derived products such as carbon black, solvents, resins, mineral oils, and intermediates are used as key raw materials in the production of flexographic inks. Flexographic printing is an important printing process used in flexible package printing. Its popularity can be attributed to its high versatility in terms of printing on a wide range of substrates.

Mar, 2019 | 203 pages

The report on lipids market commences with an executive summary which provides brief yet affluent information about the lipids market. Additionally, the chapter provides an overall overview of the lipids market and includes exclusive recommendations from TMR analysts. All the key highlights of the market have been summarized at the beginning of the report.

Mar, 2019 | 254 pages

Structural adhesive is a type of adhesive that is used for applications where joints of components typically have lap shear strengths of greater than 1MPa, and, more normally, greater than 10MPa. The adhesive offers a high load bearing capability and excellent environmental and chemical resistance. This type of adhesive is widely used in permanent bonding and high-strength applications such as recreational vehicles, buses, and trucks.

Mar, 2019 | 280 pages

The research report featuring soil stabilization materials market covers a detailed analysis and revenue forecast vis-à-vis soil stabilization materials market, both at the regional as well as the global levels. The research study on soil stabilization materials market provides projections on revenue particulars, in value as well as volume, over the forecast period, backed by a historical analysis.

Mar, 2019 | 271 pages

This comprehensive report by Transparency Market Research analyzes the clean-in-place market at the global and regional levels. The report provides analysis for the period from 2017 to 2027, wherein 2018 is considered the base year and 2019–2027 is the forecast period. An in-depth and unbiased market assessment has been made to offer readers comprehensive and accurate analysis. 

Mar, 2019 | 241 pages

The report on calcite market provides a comprehensive analysis and a detailed outlook of opportunities overflowing in the global calcite market. The calcite market report offers projections based on value and volume, during the forecast period for the aspiring market players to make a note of. 

Mar, 2019 | 237 pages

This report analyzes and forecasts the non-leather products market at the global and regional levels. The market has been forecast based on value (US$ Bn) and volume. Volume differs according to products. Volume for footwear is given in billion pairs, while it is in million square meters for upholstery. 

Mar, 2019 | 251 pages

Inkjet colorants are used as raw materials in the manufacturing of inkjet inks. Pigments and dyes are the two types of inkjet colorants. Different types of pigments include organic pigments, inorganic pigments, high-performance pigments, and synthetic pigments. Inkjet colorants occur naturally in the nature and can be synthesized in laboratories.

Mar, 2019 | 362 pages

Defoamers, or antifoaming agents, are chemical additives that reduce and hamper the formation of foam in industrial processes. Defoamers are insoluble in the foaming medium and possess surface active properties. They offer low viscosity and spread rapidly on the foamy surface. This is an essential characteristic of defoamers. Defoamers have an affinity toward air-liquid surfaces, where they threaten the formation of foam lamellas. This results in the rupture of air bubbles and breakdown of the surface foam. 

Mar, 2019 | 278 pages

This report analyzes and forecasts the aluminum powders, pastes, and flakes market at global and regional levels. The market has been forecast based on volume (tons) and value (US$ Thousands) from 2018 to 2026. The study includes drivers and restraints of the global market.

Mar, 2019 | 287 pages

This report analyzes and forecasts the ink solvents market at the global and regional levels. The market has been forecast in terms of volume (tons) and value (US$ Mn) from 2018 to 2026. The study includes drivers and restraints of the global market. It also encompasses the impact of these drivers and restraints on the demand for ink solvents during the forecast period. 

Feb, 2019 | 255 pages

According to International Energy Agency, approximately 65,176 wells were drilled for oil & gas in 2017. This has increased the demand for drilling fluids. High oil prices and greater cost efficiency in offshore projects are driving the demand for exploration activities.   

Feb, 2019 | 302 pages

Hot melts are chemicals that are thermally melted to develop cohesion (internal strength) by Middle East & Africans of cooling. Hot melt adhesives primarily consist of three components: polymer or blend of polymers, tackifying resin, and wax/oil. These adhesives also include an antioxidant, filler or UV stabilizer, or a pigment as per the application. Hot tack, open time, and settling time are the key properties of hot melt adhesives. 

Feb, 2019 | 244 pages

Conductive inks are suitable for use in any pressure-sensitive automatic system. They are prepared and characterized via scanning electron microscopy, FTIR, and differential scanning calorimetry. These inks are obtained as a composite by mixing a solution of ethyl acrylate methyl acrylate (in 50:50 ratio) copolymer with carbon black and graphite into a solvent standard for acrylic polymers. Average electric resistance of these inks ranges from 40 ohms/cm to 150 ohms/cm.

Feb, 2019 | 377 pages

This report analyzes and forecast the alkylated naphthalene market at the global and regional level. The market has been forecast based on revenue (US$ thousand) and volume (tons) from 2018 to 2026. The study includes drivers and restraints of the global alkylated naphthalene market.

Feb, 2019 | 190 pages

High purity quartz is a vital industrial component required for use in the production of all high-end electronics applications, semi-conductors, and photovoltaic (PV) solar panels. None of these products can be manufactured without reliable supply of consistent-purity HPQ. High purity quartz has been gaining a lot of attention over the last few years.

Feb, 2019 | 232 pages

Tattoo ink is a product that is used to make a tattoo. It generally comprises pigments, a dissolvent, additives, and contaminants. Pigments are micro- or nano-particulate elements, typically produced from a single chemical substance. A pigment imparts color to the tattoo ink. A dissolvent, also called a dispergent, is the medium in which pigments are dissolved. 

Feb, 2019 | 305 pages

Pharmaceutical inks are used to print vital information such as name, manufacturing location, and expiry date on pharmaceuticals. They are also used to print designs, logos, and colors on medicines. Furthermore, these inks are employed in interior and exterior packaging of medicines.

Feb, 2019 | 221 pages

In screen printing, inks such as UV-cured inks, water-based inks, solvent-based inks, plastisol, and discharge inks are utilized. Screen printing is employed for garment printing and printing applications in industries such as automotive, textile, and food & beverages. Other applications of screen printing include container printing, optical disk printing, touch panel printing, and toy printing.

Feb, 2019 | 245 pages

Pine chemicals is a family of renewable, naturally occurring materials derived from the pine tree (genus Pinus). These chemicals are derived through the distillation of oleoresin or carbonization of wood. A majority of distilled products are made from gum, stumps, logs, and sulfate pulp byproducts. 

Feb, 2019 | 305 pages

Ceramic inks are carriers of ceramic fine particle metallic oxide pigments used in automatic application techniques. Ceramic ink is suspended in a medium to give it the physical consistency suitable of producing fine details. The ink is available either in the form of liquid or gel.

Feb, 2019 | 231 pages

Nanocoatings are materials that are manufactured by shrinking raw materials at the molecular level to form a denser product. They are manufactured from various raw materials such as epoxies, urethanes, carbon, and metals. Nanocoatings offer characteristics such as scratch resistance, enhanced surface appearance, UV and chemical resistance, thermal and electrical conductivity, easy-to-clean surfaces, and color and gloss retention. 

Feb, 2019 | 358 pages

Lubricants are organic substances that are used to reduce friction and heat between moving surfaces that are in mutual contact. Lubricants prevent corrosion; reduce contamination; protect seal; transmit power; and control temperature. The lubricants are available in various forms such as liquid, solid, semi-solid, and gaseous. The global lubricants market has been segmented in terms of type, product, and application.

Feb, 2019 | 320 pages

Decorative coatings improve esthetics of and protection to surfaces. They are applied to commercial and residential buildings. These coatings protect surfaces from elements such as moisture, UV radiation, and microbes. Decorative coatings include paints, wood stains or transparent coatings, enamels, and lacquers for floors, roofs, walls, ceilings, decks, pavements, walkways, and concrete surfaces. 

Feb, 2019 | 320 pages

Polyurethanes are widely utilized polymers. They are formed through the reaction between diisocyanates and polyols in the presence of other chemicals. Polyurethanes are used across the globe in almost all industries including furniture, construction, electronics, automotive, footwear, and packaging. 

Feb, 2019 | 238 pages

This report analyzes and forecasts the organic acids market at the global and regional levels. The market has been forecast in terms of value (US$ Mn) and volume (kilo tons) from 2018 to 2026. The study includes drivers and restraints of the global market. It also covers the anticipated impact of these drivers and restraints on the demand for organic acids during the forecast period.

Feb, 2019 | 196 pages

Furfural is a liquid chemical produced from biomass. Furfural is extensively utilized as a solvent during the manufacture of refractory materials, resin-bonded grinding wheels, and butadiene extraction due to its superior physical properties. This, in turn, is boosting the demand for furfural in solvents.

Feb, 2019 | 287 pages

This report analyzes and forecasts the digital inks market at the global and regional levels. The market has been forecast in terms of volume (kilo tons) and value (US$ Mn) from 2018 to 2026. The study includes drivers and restraints of the global market. It also encompasses the impact of these drivers and restraints on the demand for digital inks during the forecast period.

Jan, 2019 | 293 pages

This report analyzes and forecasts the cool roofs market at the global and regional levels. The market has been forecast in terms of value (US$ Mn) and volume (Million Square Meters) from 2018 to 2026. The study includes drivers and restraints of the global market. It also covers the anticipated impact of these drivers and restraints on the demand for cool roofs during the forecast period.

Jan, 2019 | 229 pages

Sodium sulfate (NaSO4) is commonly known as soda of sulfate. It occurs in the crystal form. It is used in large quantities in various industrial and consumer applications. Sodium sulfate is obtained by mirabilite slat. Additionally, synthetic sodium sulfate is produced by lithium batteries and other synthetic process. It is globally manufactured in abundant quantities to cater to the demand from various industries such as detergents, kraft pulping, textiles, glass, and carpet cleaners.

Jan, 2019 | 316 pages

Dry and liquid pesticides encapsulated in small-sized plastic capsules are known as microencapsulated pesticides. The term ‘microencapsulation’ usually refers to capsule size ranging from 1 µm to 1 mm. Microencapsulated pesticides are mixed with water and sprayed.

Jan, 2019 | 251 pages

This report analyzes and forecasts the ductile iron pipes market at the global and regional levels. The market has been forecast based on volume (Thousand Tons) and value (US$ Mn) from 2018 to 2026. The study includes drivers and restraints of the global ductile iron pipes market. It also covers the anticipated impact of these drivers and restraints on the demand for ductile iron pipes during the forecast period. The report also highlights opportunities in the ductile iron pipes market at the global level.

Jan, 2019 | 222 pages

This report analyzes and forecasts the ethyl acetate market at global and regional levels. The market has been forecast based on volume (tons) and value (US$ Mn) from 2018 to 2026. The study includes drivers and restraints of the global market. It covers the impact of these drivers and restraints on the demand for ethyl acetate during the forecast period. 

Jan, 2019 | 400 pages

Timely maintenance and repair enhances the appearance and durability of vehicles. Vehicles need protection from external factors such as climate; road conditions; foreign particles including stones, debris, and rubble; accidents; temperature; and UV radiation. Automotive refinishing coatings are used in the automotive aftermarket by end-users.

Jan, 2019 | 160 pages

Polyvinyl alcohol fibers are manufactured from polyvinyl alcohol resins. These were developed in Japan and were first commercialized by Kuraray Co. Ltd. Polyvinyl alcohol fibers were developed for usage in textiles, fabrics, and clothing applications. These fibers are popular in Asia by the name of Vinylon. 

Jan, 2019 | 367 pages

Powder metallurgy is used to process powdered feedstock to manufacture various types of components across several industries globally. Powder metallurgy is a preferred manufacturing process for various structured parts due to its cost effectiveness. 

Dec, 2018 | 400 pages

Automotive coatings are applied on the surface of automotive or vehicles to improve their durability and resistance to dust, high temperature, foreign particles, corrosion, and rusting. These coatings are applied by Original Equipment Manufacturers (OEMs) during the manufacture of vehicles. Automotive coatings are applied in the following order over substrates: E-coat or electro-coat, primer, base coat, and clear coat.

Dec, 2018 | 202 pages

Sulfuric acid is an extremely corrosive acid that is highly soluble in water. It is one of the most widely produced and consumed bulk chemicals worldwide. Sulfuric acid is employed in a wide range of industrial and domestic applications. It is extensively employed in fertilizers, wastewater treatment, chemical synthesis, metal & mining, paper, and pharmaceutical applications.

Dec, 2018 | 430 pages

Polyurea coatings are capable of holding two surfaces together in a strong and permanent manner. They are employed for their holding and bonding power. Polyurea coatings are materials with high shear and tensile strength. They join substances of different geometrics, sizes, and composition. They eliminate corrosion when associated with metals. 

Nov, 2018 | 234 pages

Cyclopentane is a flammable hydrocarbon used in the manufacture of synthetic resins and rubber adhesives. It is also used as a blowing agent in the manufacture of polyurethane insulating foam, which is employed in several domestic appliances such as refrigerators and freezers, thereby replacing environmentally hazardous alternatives such as CFC-11 and HCFC-141b. The cyclopentane market is driven by technological innovations, socio-economic development, and rise in concerns about environment protection.

Nov, 2018 | 243 pages

This report analyzes and forecasts the market for textile enzymes at the global and regional levels. The market has been forecast in terms of volume (tons) and value (US$ Mn) from 2018 to 2026. The study includes drivers and restraints of the global market. It also covers the anticipated impact of these drivers and restraints on the demand for textile enzymes during the forecast period. The report also highlights growth opportunities in the global textile enzymes market.

Nov, 2018 | 322 pages

Waste oil can also be termed as used oil. Waste oil is refined oil that has been used for various intended purposes. Waste oil contains several contaminants, dirt, and chemicals. Re-refining of waste oil requires proper recycling and disposal techniques, which are drawn up by government bodies. This helps avoid illegal dumping of waste oil and protects the environment. New technologies in waste oil treatment and disposal enable efficient servicing and help in mitigating the risk of pollution.

Nov, 2018 | 224 pages

Butadiene, also known as 1, 3-butadiene, is a non-corrosive, colorless, and aromatic gas that can be condensed to a liquid form at a certain temperature. Synthetic butadiene is produced by petroleum refining of crude oil. Steam cracking of hydrocarbons, dehydrogenation of butane, and dehydration of ethanol are the conventional methods of butadiene production. Butadiene can also be prepared from renewable biomass feedstock.

Nov, 2018 | 180 pages

The report analyzes the global base oil market for the period from 2017 to 2026, wherein 2017 is considered the base year and the period from 2018 to 2026 the forecast period. Data for 2017 has been included as historical information. The report covers all trends prevalent in the global base oil market. It also highlights various drivers, restraints, and opportunities expected to influence the market during the forecast period. 

Nov, 2018 | 157 pages

Calcium propionate acts as an antimicrobial agent for killing microorganisms such as bacteria, algae, viruses, and fungi. It is considered an ideal bakery preservative. Additionally, it is utilized in feed supplement to prolong the shelf life of products. Rise in demand for preserved food is expected to be a major driver of the global calcium propionate market during the forecast period. The market is likely to expand significantly in the near future. Calcium propionate is a cost effective food preservative compared to its substitutes. This is a major factor that drives the market.

Nov, 2018 | 227 pages

Lithium is a lightweight metal, which is an important element employed in the lithium-ion battery technology. Several manufacturers are focused on production of lithium derivatives such as lithium carbonate and lithium hydroxide. Lithium products are primarily used in energy storage systems, automobiles, household electricity applications, and consumer electronics products. Advancements in the energy storage sector are likely to boost the demand for lithium across the world in the near future.

Nov, 2018 | 296 pages

This report focuses on the study of seed treatment chemicals at the global and regional levels. It analyzes and forecasts the seed treatment chemicals market based on revenue (US$ Mn) and volume (tons) from 2018 to 2026. The market has been forecast based on historical trends, demand-supply scenario, drivers, restraints, opportunities, and expansions and developments by stakeholders across the value chain.

Nov, 2018 | 576 pages

This report analyzes and forecasts the market for cast polypropylene packaging films at the global and regional levels. The market has been forecast in terms of value (US$ Mn) from 2018 to 2028. The study includes drivers and restraints of the global market. It also covers the anticipated impact of these drivers and restraints on the demand for cast polypropylene packaging films during the forecast period. The report also highlights growth opportunities in the global cast polypropylene packaging films market.

Nov, 2018 | 244 pages

This report analyzes and forecasts the market for furfural derivatives at the global and regional level. The market has been forecasted based on volume (Kilo Tons) and value (US$ Mn) from 2018 to 2026. The study includes drivers and restraints of the global furfural derivatives market. It also covers the impact of these drivers and restraints on the demand for furfural derivatives during the forecast period. The report also highlights opportunities in the furfural derivatives market on a global level.

Nov, 2018 | 228 pages

Sodium lauroyl isethionate (SLI) is a mild surfactant used in various personal care applications. Sodium lauroyl isethionate exhibits excellent detergency properties. It is also used as a cleansing agent in several applications such as shampoos, facial care products, body washes, and toothpastes. However, it can be harmful to the skin and can cause irritation when used in higher concentrations or quantities above the standard limits. Sodium lauroyl isethionate is formulated by using fatty acids combined with isethionic acid. Isethionic acid is derived from sodium bisulfite and aqueous solution of ethylene oxide. However, ethylene oxide is a carcinogenic substance. This may act as a restraining factor for the market.

Nov, 2018 | 227 pages

Based on type, the global sodium cocoyl isethionate has been segmented into needles/flakes, powders, and granules. Needles/flakes is the major segment of the global sodium cocoyl isethionate market in terms of value and volume. The segment is expected to maintain its dominance during the forecast period. The granules segment is estimated to expand at a rapid pace during the forecast period. Powders form of sodium cocoyl isethionate is primarily used in applications such as liquid soaps and shampoos, wherein lower levels of fatty acids in the final product are required. 

Oct, 2018 | 233 pages

Sodium chloride (NaCl) is commonly known as salt. It occurs in the crystal form. It is used in large quantities across various industrial and consumer applications. Sodium chloride is obtained by evaporating sea water or brine by solar and vacuum evaporation methods. Additionally, it is produced by mining salt halite, which is known as rock salt. It is globally manufactured in abundant quantities to cater to the demand from various industries such as chemicals, textiles, plastics, personal care, and food & beverages.

Oct, 2018 | 350 pages

Calcium chloride is an inorganic crystalline salt with chemical formula CaCl2. It is highly soluble in water and is a colorless solid at room temperature. It is primarily used in de-icing and dust control applications. Calcium chloride anhydrous salt is hygroscopic; hence, it is also used as a desiccating agent. Calcium chloride is also used to increase the hardness of water in swimming pools. It displays important properties. For instance, it has the ability to help depress the freezing point of water. Therefore, it is used to prevent the formation of ice. It is also employed as a de-icing agent.

Oct, 2018 | 272 pages

This report analyzes and forecasts the fly ash market at the global and regional level. The market has been forecast based on revenue (US$ Mn) and volume (million tons) from 2018 to 2026. The study includes drivers and restraints of the global fly ash market. It also covers the impact of drivers and restraints on demand for fly ash during the forecast period. The report also highlights opportunities in the fly ash market at the global and regional level.

Oct, 2018 | 204 pages

Cross-laminated timber (CLT) is also known as X-lam or massive timber. It is a prefabricated engineered wood panel made of three to four layers of solid-sawn lumber or composite lumber. Composite lumber is well-laminated through the gluing of longitudinal and transverse layers of timber by using structural adhesives to form a solid, rectangle-shaped, straight, and plane timber. Cross-laminated timber was first developed and used in Germany and Austria in the 1990s. 

Oct, 2018 | 172 pages

This report analyzes and forecasts the industrial DeNOx systems & services market at the global and regional levels. The market has been forecast based on revenue (US$ Mn) from 2018 to 2026. The study includes drivers and restraints of the global market. It also covers the expected impact of these drivers and restraints on the demand for industrial DeNOx systems and services during the forecast period. The report also highlights opportunities in the industrial DeNOx systems & services market at the global level.

Oct, 2018 | 294 pages

2-Ethylhexanoic acid is a colorless liquid that is commonly used as a plastic stabilizer, drying agent, emollient in cosmetics, processing aid in drugs, wood preservative, and corrosion inhibitor. Commercially, 2-ethylhexanoic acid is produced by using the butyraldehyde method. Addition of 2-ethylhexanoic acid metal salts to PVC increases its resistance to high temperatures. It also functions as a thermal and color stabilizer in alkyd resin plastics. 2-Ethylhexanoic acid is used as a drying agent in paints, enamels, varnishes, and printing inks. 2-Ethylhexanoic acid is combined with metals to produce metal salts and these salts are then added to solvents to function as drying agents. 

Oct, 2018 | 189 pages

This report focuses on study of D-amino acid at the global and regional levels. It analyzes and forecasts the market for D-amino acid based on revenue (US$ thousand) and volume (tons) from 2018 to 2026. The market has been forecast based on historical trends, and demand-supply scenario, drivers, restraints, opportunities, and expansions and developments by stakeholders across the value chain.

Sep, 2018 | 290 pages

The global cooling fabrics market has been segmented based on product, textile type, technology, end-user, and region. In terms of product, the synthetic segment dominated the market with more than 70% share in 2017. In terms of textile type, the woven segment held prominent share of the market in 2017. It was followed by the non-woven segment. 

Sep, 2018 | 235 pages

Medical membranes are used in drug delivery, bio-separation, and tissue regeneration as well as in diagnostic devices and artificial organs. They are also used as coatings for medical devices. The medical industry employs membranes in drug delivery, hemodialysis, and tissue engineering as well as in artificial organs such as oxygenators and artificial pancreas. The membrane technology is pivotal in medical applications in case of lifesaving treatment methods.

Sep, 2018 | 236 pages

Glass flake coatings possess superior properties such as anticorrosion and anti-abrasion. They also offer barrier to high temperature and harsh chemicals. Glass flake coatings are widely used in various applications due to their characteristics of fire retardancy, mechanical reinforcement, dimensional stability, and UV light resistance. These coatings provide protection from physical and chemical corrosion. Therefore, they are extensively employed in marine, infrastructure, and construction industries.

Sep, 2018 | 277 pages

Wireless power transmission is transfer of electric energy without the use of conductors. This is generally achieved by connecting a wireless transmitter to a power source. The field energy generated in the power source is transmitted to one or more receivers by the transmitter. The receivers i.e. receiving devices again convert the field energy into the electric current and use it for their functioning.

Sep, 2018 | 309 pages

Pigments are insoluble particulate materials that provide color, opacity, gloss control, and certain properties such as corrosion inhibition. Pigments add a coloring effect to different substrates. Pigments improve light fastness, heat resistance, hiding power, opacity, and transparency. Based on product, the pigments market has been broadly classified into three categories: inorganic, organic, and specialty. Titanium dioxide, iron oxide, carbon black, chromium compounds, etc. form a class of inorganic pigments with extensive industrial usage.

Sep, 2018 | 260 pages

Zinc–air batteries are used to power a large number of electronic gadgets and appliances used in day-to-day life. Zinc–air batteries are commonly used in watches, hearing aids, pagers, etc. These batteries have high energy density and they are generally inexpensive to produce. Demand for zinc–air batteries in the remote signaling & communication sector is also rising.

Sep, 2018 | 400 pages

This report analyzes and forecasts the market for textile dyestuff at the global and regional levels. The market has been forecast in terms of revenue (US$ Mn) and volume (tons) for the period from 2018 to 2026. The study includes drivers and restraints of the global textile dyestuff market. It also covers the expected impact of these drivers and restraints on the demand for textile dyestuff during the forecast period. The report also highlights opportunities in the global textile dyestuff market.

Sep, 2018 | 326 pages

The ion exchange membrane market report provides an analysis of the global ion exchange membrane market for the period 2017 to 2026, wherein 2017 is the base year and 2018 to 2026 the forecast period. Data for 2017 has been included as historical information. The report covers the prevalent trends that play a major role in the expansion of the ion exchange membrane market.

Aug, 2018 | 280 pages

The global aluminum market has been segmented based on product form, manufacturing process, and application. Based on product form, long products dominated the market with more than 40% share in 2017. In terms of manufacturing process, the extrusion segment held prominent share of the market in 2017. However, the casting segment is anticipated to expand at a higher CAGR compared to other manufacturing processes during the forecast period. Based on application, aluminum is widely used in segments such as building & construction, automotive, and electrical & electronics. However, global demand for aluminum varies across different regions according to different applications.

Aug, 2018 | 260 pages

Butyl acrylate a major type of acrylic esters, which is widely popular for its durability, hardness, high strength, and high temperature resistance. It is primarily utilized for producing thermoplastic compounds. Butyl acrylate is ideal for surface coating applications.

Aug, 2018 | 235 pages

Lubricants are essential for proper functioning of any machinery used in an application. Lubricants are used to reduce friction between two moving surfaces. A lubrication system does not eradicate friction from the machinery. Friction is required for transfer of power from one part to another. A lubrication system is employed to lower the wear and tear in the operating machinery.

Aug, 2018 | 302 pages

Roofing materials are the building blocks of external layers of a building. These include shingles, insulation, waterproofing, siding, windows/doors, and railing. Application of roofing materials depends on the raw materials that they are processed from. These raw materials range from natural products, such as thatches and slates, to commercially available products such as asphalt, tiles, metal, bitumen, and plastic sheeting.

Aug, 2018 | 250 pages

Prolonged usage of medical devices results in adverse factors including wearing out of these devices, rise in infections, development of microbes, and increase in friction and corrosion. In order to counter these adverse effects, medical devices are coated. Different products of surface-coating technologies have been implemented in the recent past. 

Jul, 2018 | 231 pages

This report analyzes and forecasts the market for vacuum insulated glass for building & construction at the global and regional level. The market has been forecast based on value (US$ Mn) and volume (thousand square meters) from 2018 to 2026. The study includes drivers and restraints of the global vacuum insulated glass market for building & construction. It also covers the impact of these drivers and restraints on the demand for vacuum insulated glass during the forecast period. The report also highlights opportunities in the vacuum insulated glass market for building & construction at the global level.

Jul, 2018 | 165 pages

L-lactide is produced as an intermediate in the formation of polylactic acid or PLA. It finds applications in various end-user industries such as food & beverage packaging, electrical & electronics, medical & health care, agriculture, and textiles. Ring polymerization is the common method of production of L-lactide. Rise in applications of bioplastics in the food & beverage packaging as well as medical and health care sectors is anticipated to boost demand for L-lactides in these applications.

Jul, 2018 | 250 pages

High-performance adhesives possess superior properties such as high tensile strength, high temperature resistance, low curing time, high elasticity, high durability, and excellent moisture resistance. These adhesives are commonly utilized in critical and complex applications, wherein enhanced performance of adhesives is required.

Jul, 2018 | 190 pages

Expanded graphite, or intumescent flake graphite, is produced from natural flake graphite by treating it with intercalation reagents such as acids, which move between the layers of graphite to form intercalated flake graphite. The intercalated flake graphite when subjected to high temperatures (around 1000°C) expands due to the breakdown of intercalation compounds, which form gaseous products that exerts pressure on graphite layers and pushes them apart. The intercalated flake graphite expands up to 300 times the original volume along with a huge increase in surface area, while the bulk density of the product reduces.

Jul, 2018 | 239 pages

Polypropylene catalyst is used in the polymerization reaction of propylene to form polypropylene (PP) in a fluidized bed reactor. The Ziegler–Natta catalyst segment dominates the global polypropylene catalyst market, due to low price of the product. Potential application of polypropylene catalyst lies in the production of polypropylene for injection-molded products such as vials, suture materials for surgery, and automotive interior parts including bumper facias, instrumental panels, and door panels.

Jul, 2018 | 243 pages

This report analyzes and forecasts the market for boron trifluoride at the global and regional level. The market has been forecast based on revenue (US$ Mn) and volume (tons) from 2018 to 2026. The study includes drivers and restraints of the global boron trifluoride market. It also covers the impact of drivers and restraints on demand for boron trifluoride during the forecast period. The report also highlights opportunities in the boron trifluoride market at the global and regional level.

Jul, 2018 | 269 pages

Specialty resins are a high-performance class of resins that are manufactured to provide superior thermal and chemical resistance to materials in which they are used. Specialty resins are of types such as epoxy, vinyl, polyamides, UPR, and others. Out of all the resin types, epoxy is the most used resin because of its outstanding performance and resistance. 

Jul, 2018 | 277 pages

Superabsorbent polymer is a material that absorbs and retains substantial volumes of water and aqueous solutions. Superabsorbent polymer is available in granular, solid, or powder forms. This polymer can absorb up to several hundred times its own weight in aqueous solution and can resist release of the absorbed fluid under pressure.

Jul, 2018 | 369 pages

This report analyzes and Forecast the naphthalene sulfonate market at the global and regional level. The market has been forecast based on revenue (US$ Mn) and volume (tons) from 2018 to 2026. The study includes drivers and restraints of the global naphthalene sulfonate market. It also covers the impact of these drivers and restraints on the demand for naphthalene sulfonate during the forecast period. The report also highlights opportunities in the naphthalene sulfonate market at the global level.

Jun, 2018 | 275 pages

Inorganic pigments are manufactured by using petrochemical sources or natural resources. These are the oldest pigments used across the world. On the basis of phenomenon of refraction, these pigments provide an iridescent effect, complex effect, pearlescent effect, metallic effect, and florescent effect. They have properties such as good color strength, heat and light stability, opacity, weather and chemical resistance. Titanium dioxide is a highly consumed inorganic pigment as it possesses good thermal stability. Inorganic pigments are used extensively in the formulation of paints and coatings.

Jun, 2018 | 219 pages

This report focuses on the study of electronic grade hydrofluoric acid at the global and regional level. It analyzes and forecasts the market for electronic grade hydrofluoric acid based on revenue (US$ Mn) and volume (tons) from 2018 to 2026. The market has been forecast based on historical trends, demand-supply scenario, drivers, restraints, and opportunities.

Jun, 2018 | 320 pages

This report analyzes and forecasts the market for flexible PVC films at the global and regional level. The market has been forecast based on revenue (US$ Mn) and volume (tons) from 2018 to 2026. The study includes drivers and restraints of the global flexible PVC films market. It also covers the impact of these drivers and restraints on the demand for flexible PVC films during the forecast period. The report also highlights opportunities in the flexible PVC films market at the global and regional level.

Jun, 2018 | 261 pages

Fire resistant hydraulic fluid is a type of hydraulic fluid with high fire resistant property and high combustion temperature vis-à-vis mineral oils. Certain applications such as die casting or hydraulic presses which are generally performed near an ignition source for petroleum-based hydraulic fluids such as open flames or hot surfaces can lead to a potential disaster.

Jun, 2018 | 256 pages

Polyaluminum chloride is a versatile inorganic polymer manufactured in liquid and powder forms. The powder form of polyaluminum chloride is majorly used, as it can be easily transported. Asia Pacific dominated the global polyaluminum chloride market in 2017, in terms of volume and revenue, and is likely to continue its dominance during the forecast period.

Jun, 2018 | 430 pages

This report analyzes and forecasts the market for green petroleum coke at the global and regional level. The market has been forecast based on revenue (US$ Mn) and volume (million tons) from 2018 to 2026. The study includes drivers and restraints of the global green petroleum coke market. It also covers the impact of these drivers and restraints on the demand for green petroleum coke during the forecast period. The report also highlights opportunities in the green petroleum coke market at the global level.

May, 2018 | 200 pages

Phosphorus acid is also known as orthophosphoric acid, and it is used in the manufacture of the fertilizers. At the industrial level, phosphoric acid is produced by two methods: the thermal process and the wet process. The wet process method is predominantly used in the commercial sector. The more expensive thermal process method produces a purer product, which is used in the food industry. In wet process, phosphoric acid is produced from the phosphate rock. The process involves addition of concentrated sulfuric acid into a series of well-stirred reactors. The thermal process method requires raw materials such as elemental (yellow) phosphorus, air, and water for the production of phosphoric acid. The following steps are a part of the thermal process method: combustion, hydration, and demisting.

May, 2018 | 350 pages

Printed circuit boards (PCBs) form an integral part of any electronic device and serve as the foundation of a majority of electronic products. They are functional centers of most electronic devices and are used to connect various electronic components mounted on the PCBs, thereby forming an assembly or circuitry meant to perform various functions.

May, 2018 | 270 pages

This report analyzes and forecasts the market for calcium hypochlorite at the global and regional level. The market has been forecast based on volume (Kilo Tons) and revenue (US$ Mn) from 2018 to 2026. The study includes drivers and restraints of the global calcium hypochlorite market. It also covers impact of these drivers and restraints on the demand for calcium hypochlorite during the forecast period. The report also highlights opportunities in the calcium hypochlorite market at the global level.

May, 2018 | 221 pages

Sodium cocoyl glycinate is a mild chemical agent derived from plant oils. It is biodegradable. Sodium cocoyl glycinate primarily functions as a surfactant-cleansing agent, distinguishing itself by its exceptional skin compatibility as well as its foaming behavior. It acts as a skin barrier and can reduce unwanted skin reactions. North America and Europe are the major regions of the sodium cocoyl glycinate market. 

May, 2018 | 248 pages

This report analyzes and forecasts the epoxy curing agents market at the global and regional level. The market has been forecast based on revenue (US$ Mn) and volume (kilo tons) from 2017 to 2025. The study includes drivers and restraints of the global epoxy curing agents market. It also covers impact of these drivers and restraints on the demand for epoxy curing agents during the forecast period.

Apr, 2018 | 205 pages

Sodium cocoyl glutamate is primarily used as an ingredient in personal care products such as skin care and hair care products. It is derived from natural sources such as coconut oil, palm kernel oil, and fermented sugar. The unique cleansing and foaming properties of sodium cocoyl glutamate makes it ideal for usage in personal products. Sodium cocoyl glutamate protects the skin from drying and retains the moisture content. Ecocert, the first certification body to develop standards for natural and organic products, has recognized sodium cocoyl glutamate as a natural ingredient. 

Apr, 2018 | 280 pages

Flexitanks are polymer bags generally made up of polyethylene and polypropylene, used for transportation of bulk quantities of liquids. Single-use, multilayer flexitanks are among the significantly used types of flexitanks due to several advantages offered by them. Edible liquids such as wine and fruit juices and edible oils such as palm oil, cotton seed oil, coconut oil, crude palm kernel & babassu oil, etc. are heavily exported liquids in flexitanks. Polyethylene forms a major material, by weight, in the overall construction of flexitanks.

Apr, 2018 | 283 pages

Magneto rheological fluid (MR fluid or MRF) can be defined as smart and controllable fluids. It is a non-colloidal mixture of ferromagnetic particles randomly dispersed in oil or water, along with surfactants used to avoid the settling of suspended particles. MR fluid, when subjected to magnetic field, quickly increases its apparent viscosity and becomes a viscoelastic solid.

Apr, 2018 | 217 pages

This report analyzes and forecasts the market for immersion oil at the global and regional level. The market has been forecast based on revenue (US$ Mn) and volume (liters) from 2016 to 2025. The study includes drivers and restraints of the global immersion oil market. It also covers impact of these drivers and restraints on the demand for immersion oil during the forecast period. The report also highlights opportunities in the immersion oil market at the global level.

Apr, 2018 | 233 pages

Dicyandiamide is extremely reactive, odorless, white powder that is used as an intermediate for production of active pharmaceutical ingredients and a diverse range of guanidine salts. Pharmaceutical grade is a prominently used dicyandiamide grade. The other types of dicyandiamide grades include electronic grade, industrial grade, and others. Other grades primarily consist of ultra-micronized grade and other standard grades. 

Apr, 2018 | 345 pages

Defoamers, or antifoaming agents, are chemical additives that reduce and hamper the formation of foam in industrial processes. Defoamers are generally insoluble in the foaming medium and possess surface active properties. They offer low viscosity and spread rapidly on the foamy surface. This is an essential characteristic of defoamers. Defoamers have an affinity toward air-liquid surfaces, where they threaten the foam lamellas. This results in the rupture of air bubbles and breakdown of the surface foam.

Mar, 2018 | 188 pages

N-Methyldiethanolamine, also known as methyl diethanolamine, or MDEA, is an organic compound with the formula CH3N(C2H4OH)2. The product is a colorless liquid with an ammonia odor. It is miscible with water, alcohol, and benzene. N-Methyldiethanolamine is used for amine gas treating, also known as gas sweetening or acid gas removal, the removal of hydrogen sulfide and carbon dioxide from gases in the petrochemical industry. 

Mar, 2018 | 210 pages

Automotive Lubricant is a substance made of base oil, which is derived from crude oil, and additive package. The base oil used in lubricant formulations is of mineral, synthetic, and semi-synthetic in nature and significantly determines the properties of finished lubricants. Additives are added to the base oil to impart various properties and improve its performance. Lubricant additives are inorganic and organic compounds that are dissolved or suspended as solids in lubricants or base oils.

Mar, 2018 | 236 pages

Textile chemicals are highly specialized chemicals incorporated in the long chemical and non-chemical processing of textiles. They are employed to impart specific properties such as water resistance, fire resistance, warp size, and others. They are utilized in processes such as scouring, bleaching, softening, dyeing, printing, finishing, and others.

Mar, 2018 | 179 pages

This report analyzes and forecasts the market for hollow fiber ceramic membranes at the global and regional level. The market has been forecast based on revenue (US$ Mn) and volume (thousand square meter) from 2016 to 2025. The study includes drivers and restraints of the global 2,5-furandicarboxylic acid market. It also covers the impact of these drivers and restraints on demand for 2, 5 furandicarboxylic acid during the forecast period. The report also highlights opportunities in the 2,5-furandicarboxylic acid market at the global level.

Mar, 2018 | 206 pages

The report by Transparency Market Research provides analysis and forecast on the global Ion exchange membrane market. Ion exchange membrane helps in transporting ions that are dissolved across conductive polymeric membrane. The ion exchange membrane comprises of a polymeric material. Ion exchange membranes are finding large application in electro dialysis, desalination, and other applications.

Mar, 2018 | 178 pages

Lignosulfonates or sulfonated lignins are water-soluble anionic polyelectrolyte polymers. They are byproducts of the production of wood pulp using sulfite pulping. They are among the most important chemicals used by the animal feed and concrete admixture industries worldwide.

Mar, 2018 | 170 pages

With increasing need of thermal insulation across various end user applications, vacuum insulation panels have been witnessing an increased adoption across the globe. The main factor influencing the growth in demand and sale of vacuum insulation panels is increasing urbanization coupled with high growth in construction industry. Moreover, application of vacuum insulation panels extends from construction to logistics industry, where they are employed in reefer containers to carry or ship food as well as non-food material.

Mar, 2018 | 437 pages

Distributed energy generation is defined as the power generation at the point of consumption. Distributed generation generates power by utilizing various technologies such as solar photovoltaic, wind turbines, CHP (combined heat and power), reciprocating engines, micro turbines, and fuel cells in order to provide on-site power to consumers. 

Mar, 2018 | 233 pages

Matting agents are fine particles which when added to the coatings & paints formulations, provide with a low-gloss, low-sheen, satin, matt-finish to the surface on which the paints & coatings are applied. Silica matting agents are the majorly used matting agents. The other types of matting agents include thermoplastic and wax-based matting agents, the market for which is currently at a preliminary stage. 

Mar, 2018 | 203 pages

Nanocellulose products are employed in various end user industries including composites, paper processing, food & beverage, paints & coatings, medical & pharmaceutical, personal care, and others which include oil & gas, textiles and cement.

Mar, 2018 | 236 pages

Methylene diphenyl isocyanate (MDI), tolylene diisocyanate (TDI) and polyols are the key raw materials required in the manufacture of TPU films. These raw materials are used widely in other end-user industries such as textiles, polymers, rubber processing, and medical & health care. Hence, the extensive consumption of these raw materials from numerous end-user industries affects the demand-supply scenario and resulting in increased prices of TPU films. 

Feb, 2018 | 360 pages

This report analyzes and forecasts the market for protective coatings at the global and regional level. The market has been forecast based on revenue (US$ Mn) and volume (Kilo Tons) from 2017 to 2025. The study includes drivers and restraints of the global protective coatings market. It also covers the impact of these drivers and restraints on demand for protective coatings during the forecast period. The report also highlights opportunities in the protective coatings market at the global and regional level.

Feb, 2018 | 241 pages

Isobutanol is a bulk chemical used in many industrial applications such as paints & coatings, oil & gas, chemicals, textiles, pharmaceuticals etc. Isobutanol can be defined as a colourless flammable liquid with a characteristic smell which is mostly used as a solvent and chemical intermediate. Isobutanol is produced by the carbonylation of propylene.

Feb, 2018 | 170 pages

A new report on glass reinforced plastic provides perceptive insights on the chronological growth flight of the market along with the future prospects and present scenario of the market.

Feb, 2018 | 175 pages

Calcium carbonate is the chemical compound found abundantly in nature in the form of limestone, chalk and marble. It is also found in the shells of marine animals which inhale the carbon dioxide and produce calcium carbonate. 

Feb, 2018 | 170 pages

This report analyzes and forecasts the market for phytonutrients at the global and regional level. The market has been forecast based on revenue (US$ Mn) and Volume (Tons) from 2017 to 2025.

Feb, 2018 | 315 pages

This report analyzes and forecasts the market for wind power coatings at the global and regional level. The market has been forecast based on revenue (US$ Mn) and volume (Kilo Liters) from 2017 to 2025. The study includes drivers and restraints of the global wind power coatings market. It also covers the impact of these drivers and restraints on demand for wind power coatings during the forecast period. 

Feb, 2018 | 197 pages

Dimethyl carbonate is a colorless, transparent and flammable organic compound classified as a carbon ester. It is an environmentally suitable compound that can used for upgrading several promising renewables including fatty acids, glycerol, polysaccharides, triglycerides, and lignin-based phenolic compounds and sugar-derived platform molecules.

Feb, 2018 | 125 pages

Hydrogen peroxide is a basic chemical compound, available in liquid form at room temperature. The product is slightly more viscous than water. It is the simplest peroxide available and is basically used as an oxidizer, bleaching agent and antiseptic product. Hydrogen peroxide can be manufactured through various manufacturing processes; however, anthraquinone autoxidation is the most widely used process.

Feb, 2018 | 207 pages

The global solar cable market report provides analysis for the period 2015–2025, wherein the period from 2017 to 2025 is the forecast period and 2016 is the base year. The report covers all the major trends and technologies playing key role in solar cable market growth over the forecast period. It also highlights the drivers, restraints, and opportunities expected to influence market’s growth during the forecast period.

Jan, 2018 | 307 pages

Aerospace Coatings are used to coat the interior and external structural components of aircraft. Innovative technologies and industry friendly regulations implemented by various governments fuel the expansion of aerospace coatings market. Expansion of the aerospace coatings market can be ascribed to the advancements made in the defense and space sector. However, commercial and business aircraft is the key factor driving the global aerospace coatings market.

Jan, 2018 | 171 pages

?Dimethyl ether is a colourless gas with a faint ethereal odour. It is shipped as a liquefied gas under its vapour pressure. Dimethyl ether is the simplest ether in the ether group. Di-methyl ether can either be derived from renewable materials such as biomass, municipal waste, and agricultural waste, or from fossil fuels such as coal and natural gas. Presently, a vast majority of commercial DME is derived from fossil fuels. LPG blending is one of the major application of dimethyl ether market across the globe. 

Jan, 2018 | 163 pages

Pressure sensitive tapes are used across myriad applications with new applications being discovered almost daily. The use of pressure sensitive tapes is expected to rise as a joining and fastening solution with advancement in adhesive technology, low cost in comparison to traditional fastening systems, and ease of use.

Jan, 2018 | 160 pages

Rice Husk Ash (RHA) is a product obtained by burning rice husk, which is the outer covering of rice harvested from a paddy field. Rice husk is used to generate renewable energy. The RHA obtained from rice husk is as valuable as the rice husk in numerous applications. However, extensive R&D is required to increase the commercial consumption of RHA, as the addressable market is more of than half of the current RHA demand.

Jan, 2018 | 361 pages

The carbohydrases, proteases, polymerases & nucleases, Lipase, phytase are the types of enzymes used in manufacturing of industrial enzymes. The carbohydrases is expected to drive the industrial enzymes market during the forecast period. Carbohydrases and proteases are widely used various applications such as food & beverages, household and cleaning products. The demand for phytase is high due to its use in animal feeds. Enzymes like phospholipase and lipase are commonly used for biofuel production. With the increasing demand for biofuel, the demand for industrial enzymes like lipase and phospholipase also increase simultaneously.

Jan, 2018 | 193 pages

High performance ceramic coatings are thin layers of ceramics which are coated either on metals or ceramic substrates in order to provide better resistance against wear, corrosion and temperature. Surface modification using high performance ceramic coatings has achieved substantial improvement in the industrial environment for the past few years. Advancements made in the field of material science and technology and widening list of potential end users are anticipated to expand the high performance ceramic coatings market. Commonly employed materials for the high performance ceramic coatings include alumina, alumina-magnesia, chromia, silicon carbide, titania and zirconia. 

Jan, 2018 | 225 pages

Sodium Cocoyl Isethionate (SCI) is a type of anionic surfactant used in personal care industry. The global sodium cocoyl isethionate market is segmented by form and application. By form, SCI is found to be in needle, powder or granule form, out of which needle or flake form occupies the greatest market share.

Jan, 2018 | 143 pages

This report on the bioremediation technology & services market analyzes the current and future scenario of the global market. Large number of industrialization, oil spills and soil pollution are increasing the usage of bioremediation technology & services. Government regulations and initiatives for environmental sustainability and increasing awareness about water scarcity in the future are the major drivers of the global bioremediation technology & services market.

Jan, 2018 | 170 pages

Being strong and flammable, formaldehyde is witnessing increasing use in fuel production. This trend is also resulting in the significant growth of the market. Various research and development activities are being done as many countries are looking for new and cheap alternatives to oil. Many companies in China have also started testing formaldehyde to be used as a chemical intermediate for producing fuel. This is also expected to result in the significant growth of the global formaldehyde market.   

Dec, 2017 | 170 pages

Growing need for high-performance polymers and synthetic materials in a range of industries has driven the voluminous consumption of polyamide 6 materials. Their exceptional properties and competitive advantage when compared to other polyamide and monomer-ized materials has propelled their overall demand in the global landscape for chemicals and materials.

Dec, 2017 | 170 pages

Resins are being used on a large scale to protect and insulate electronic components and Printed Circuit Boards (PCBs) from harsh and challenging environments including vibration, moisture, physical shock, and contamination. Encapsulation of device can help resins to form a complete barrier against such harsh environment and extreme conditions.

Dec, 2017 | 170 pages

Biodiesel obtained from non-mineral sources such as vegetable oil or animal fats is being used in standard diesel engines. Being a renewable source of energy, the government of various countries are working on introducing policies that promote the use and production of biodiesel and are also providing support for the research and development activities for production. Thus, driving the growth of biodiesel market. Biodiesel is used in both pure form and blended with petroleum diesel.

Dec, 2017 | 221 pages

Phosphorescence is a process in which energy absorbed by a substance is released slowly in the form of light. Phosphorescent pigments are of the two types: zinc sulphide and strontium aluminate. Zinc sulphide phosphorescent pigments consist of very fine crystals of zinc sulfide; copper is then added to the zinc sulfide as an activator. 

Dec, 2017 | 170 pages

Methanol also known as wood alcohol has some of the similar characteristics of conventional fuels. Hence, methanol is emerging as a perfect replacement for fuels such as diesel and petrol. There has also been an increase in the use of methanol also filling stations.

Dec, 2017 | 291 pages

Polyaspartic coatings is a new class of coating technology and is a derivative of aliphatic polyisocyanate and a polyaspartic ester. They are widely used for protecting steel structures from corrosion and also used in various commercial, automotive, and power generation industry. They possess high chemical, abrasion, impact, and UV resistance. They emit low VOC as compared to their counterparts and are highly durable in nature. polyaspartic coatings doesn’t turn yellow  and require less curing time as well as maintenance compared to epoxy, polyurethane, etc. coatings.

Dec, 2017 | 257 pages

Polyacrylamides is basically a synthetic resin formed through polymerization of acrylamide. The product is available as a white solid that id soluble in water. Polyacrylamide is majorly used as a as a thickening agent, a flocculant, an absorbent, and to separate macromolecules of different molecular weights. Polyacrylamide finds application in varied market ranging from oil & gas, waste water treatment, textiles, paper & pulp, paints & coatings and others.

Dec, 2017 | 170 pages

A fluoropolymer is a polymer that consists molecules of fluorine and carbon. Being a high-performance plastic material, the fluoropolymer is used in high temperature and harsh chemicals. In the healthcare industry, the fluoropolymer is used on a large scale for packaging of medical liquids and sprays. Owing to its superior characteristics, the fluoropolymer is used over other plastics for packaging application. Companies are focusing on developing new solutions and finding out the new application of fluoropolymer.

Dec, 2017 | 180 pages

Insecticides are primarily employed in agriculture industry. Asia Pacific accounted for the major share of the global insecticides market, in terms of both revenue and volume, in 2016. Insecticides such as organophosphates, carbamates, pyrethrines & pyrethroids are used to combat insects damaging fruits & vegetables, cereals & grains, and oilseeds & pulses. Organophosphates are estimated to offer lucrative opportunities in the insecticides market in the near future. 

Dec, 2017 | 170 pages

Transparency Market Research (TMR) has recently published a comprehensive report, which delivers precision analysis and insightful forecasts on the global bio-based succinic acid market. The report studies the global bio-based succinic acid market in detail, enveloping key market dynamics exhaustively. Along with providing information restraining factors, propelling factors, and trends that affect the market expansion, the report also delivers analysis on data across different parameters to reach at significant market numbers for bio-based succinic acid.

Dec, 2017 | 476 pages

This report analyzes and forecasts the market for specialty fertilizers at the global and regional level. The market has been forecast based on revenue (US$ Mn) and volume (Kilo Tons) from 2017 to 2025. The study includes drivers and restraints of the global specialty fertilizers market. It also covers the impact of these drivers and restraints on demand for specialty fertilizers during the forecast period. The report also highlights opportunities in the specialty fertilizers market at the global and regional level.

Dec, 2017 | 170 pages

The global polycaprolactone market is expected to witness significant growth attributed to increasing demand for production of thermoplastic polyurethane. With the growing demand for thermal polyurethane in various end use industries such as construction, automotive and medical industry, demand for polycaprolactone is projected to remain high.

Nov, 2017 | 170 pages

Fungicides are biocidal chemical compounds used for destroying and inhibiting growth of fungi and fungal spores. The product helps in controlling disease, preventing disease and increasing crop productivity. Fungicides helps in improving the storage quality of harvested fruit and products such as cereals, grains, etc. Few of the examples of fungicides that are available in the market and are efficient are mancozeb, chlorothalonil, metalaxyl, strobilurin and others.

Nov, 2017 | 291 pages

Naphthenic base oil is hydro-treated group V base oil obtained through distillation of sweet crude. They possess low pour point, low wax content, and excellent swell properties. Naphthenic base oils also provide better low-temperature performance than paraffinic oils, which makes them ideal for formulating hydraulic fluids and automatic transmission fluids. Naphthenic oils respond well to antioxidants and additives due to high solvency power.

Nov, 2017 | 198 pages

Nematicide is a kind of pesticide used to control the growth of nematodes on various crops. Nematodes are parasites which affects the growth of crops by feeding on the plants roots and tissues. As with the damage caused by nematodes, nematicide companies are working towards technological development and launching new products in the market. Due to their volatile properties the companies have shifted their focus from manufacturing synthetic nematicide to natural nematicide.

Nov, 2017 | 438 pages

Iron oxide pigments improve the physical and mechanical properties of substrates. They offer properties such as good color strength, heat & light stability, opacity, weather & chemical resistance, and durability to substrates. Iron oxide pigments provides colors to varieties of end user applications and are employed in numerous industries around the globe to provide permanent and stable coloring effects to the substrates. 

Nov, 2017 | 169 pages

Herbicides are the weed killers, employed to restrict the growth of weeds in the planted crop area. Herbicides interfere with the growth hormones, in the weeds, thereby blocking their growth, which eventually leads to the death of weeds. Some of the majorly consumed herbicides include glyphosate, atrazine, dicamba, 2,4-D etc.

Nov, 2017 | 171 pages

Sodium silicate acts as a sealant in the cement & concrete industry. It provides chemical and physical durability to concrete surfaces such as bridges, walls, building blocks, slabs, and countertops. Inorganic silicates exhibit adhesive, fire-resistant, and intumescent properties in the manufacture of various building materials such as wallboard and acoustic tiles. 

Nov, 2017 | 251 pages

Barrier resins are a type of polymers that sustain the quality, and flavor of food, restrict entry of gases such as oxygen, carbon dioxide, volatile matter of nitrogen compounds, water vapor, and improve the shelf life to food products. It is used in various applications such as cosmetics & personal care products, medical packaging, aid in synthesis of laboratory chemicals,

Nov, 2017 | 196 pages

This report on the global silicone defoamer market analyzes the current and future prospects of the market. The report comprises an elaborate executive summary, including a market snapshot that provides overall information of various segments and sub-segments.

Oct, 2017 | 170 pages

The global anti-reflective glass coatings market report provides analysis for the period 2015–2025, wherein the period from 2017 to 2025 is the forecast period and 2016 is the base year. The report covers all the major trends and technologies playing a key role in anti-reflective glass coatings market growth over the forecast period.

Oct, 2017 | 170 pages

The global polyurethane foam market report provides a comprehensive look at the market by profiling the historical growth trajectory of the market from 2012 to 2017 and further providing reliable insight into the likely growth trajectory of the market over the 2017-2022 forecast period. The key drivers affecting the growth trajectory of the global polyurethane foam market are assessed in the report in order to understand the extent of their impact on the global market’s growth in the coming years. 

Oct, 2017 | 170 pages

The global polyalkylene glycol (PAG) base oil market is projected to exhibit its dominance and rise in the synthetic industry owing to outshining properties such as excellent temperature stability, high natural viscosity index, and top-quality lubricity. Moreover, the excelling performance standards of PAG base oil in industrial and automotive sectors could evidently improve the demand in the market.

Oct, 2017 | 173 pages

The global rigid polyurethane foam market is gaining from the excellent thermal insulation property of rigid polyurethane foam. Due to this, rigid polyurethane foam finds varied applications across several areas such as in domestic appliances, building and construction, automotive, and industrial insulation.

Oct, 2017 | 293 pages

This report analyzes and forecasts the market for biopolymers at the global and regional level. The market has been forecast based on revenue (US$ Mn) and volume (Kilo Tons) from 2017 to 2025. The study includes drivers and restraints of the global biopolymers market.

Oct, 2017 | 170 pages

A recent research report offered by Transparency Market Research (TMR) delivers a detailed analysis on the global antimony market for the forecast period, 2017 and 2022. This report has evaluated all important factors fuelling the prominent segments. 

Oct, 2017 | 170 pages

Tert-butyl Hydroperoxide (TBHP) is a clear, colorless, stable and aqueous solution usually available in concentration of approximately 70 wt% TBHP and 30 wt% water. TBHP belongs to the alkyl hydroperoxide chemical family. It is a highly reactive product, with three types of significant physical hazards: flammability, thermal, and decomposition due to contamination.

Oct, 2017 | 170 pages

Transparency Market Research (TMR) has complied yet another fully comprehensive, objective and insightful research report on the global market for acrylamide. The report provides a descriptive analysis on the acrylamide market on a global level. For this, insightful data has was gathered by dissecting various market elements, which enabled the group of analysts working on the report make accurate and relevant projections pertaining to the global acrylamide market.

Oct, 2017 | 296 pages

Marine coatings are applied on marine vessels, ships, cargo ships, tugs, tanks and containers, offshore vessels, yacht, super yacht, bulk carriers, chemical tankers, and military vessels for functional purposes such as prevention of corrosion, fouling due to microbes, aquatic shelled animals such as mollusks, mussels, etc.

Oct, 2017 | 170 pages

The global nitric acid market report provides in-depth insights into the size and share of various segments, remarkable trends and opportunities in various regions, and the competitive landscape, including key strategies adopted by various players to consolidate their shares. The study meticulously tracks the changes in regulatory landscape and advances in technologies pertaining to the commercial production of nitric acid.

Oct, 2017 | 205 pages

Sodium sulfate is available in two forms in nature, dehydrate and anhydrous. Dehydrate form is produced from mirabilite and is also known as Glauber’s salt. Anhydrous is produced from mineral thenardite. Synthetic sodium sulfate is recovered as a by-product. Some of the industrial processes that recover sodium sulfate are production of rayon, phenol or boric acid, and chromates.

Oct, 2017 | 170 pages

The report on the global insect growth regulators market provides a detailed insight into key drivers and restraints, notable trends, share and size of various segments, and competitive landscape. The study takes a closer look at regulatory landscape prominent in various regions. It offers a critical evaluation of the pricing strategy and cost structure, and assesses the various factors driving the prominent segments in various regions. 

Oct, 2017 | 170 pages

The global ethanol market is known for its perseverance to sustain growth and demand in challenging situations. Ethanol producers in chief locations such as the U.S. remained unaffected when the Organization of the Petroleum Exporting Countries (OPEC) strategized to snuff out competition which halted the nation’s prominent boom during the time. However, U.S. producers were still able to reach to new heights of success. 

Oct, 2017 | 170 pages

The global chlorine market is prophesied to increase demand in the near future, considering the increasing growth of the liquid chlorine industry. One of the major applications of liquid chlorine could be as a bleaching agent in end-use sectors such as pulp and paper and water treatment. Even inorganic and organic complex chemical manufacturers could up the demand for liquid chlorine. Asia Pacific is prognosticated to lead the market with a high demand for liquid chlorine in the production of vinyl chlorides, which could be further employed for producing polyvinyl chloride (PVC).

Oct, 2017 | 170 pages

The market study on the global acrylic emulsions market is a 360 degree overview of growth trends, product developments, and competitive strategies of the said market for the 2017-2022 forecast period. The report also examines market drivers, challenges, and opportunities that are expected to have a bearing on the market over the aforementioned forecast period.

Sep, 2017 | 170 pages

The global smart fabrics market is prophesied to fetch a raise in demand in the smart clothing space as smart material and sensor suppliers cash in on favorable opportunities therein. For smart clothing, smart materials and sensors are considered to be critical enabling technologies. Developments in these technologies pertaining to smart clothing could augur well for the growth of the market.

Sep, 2017 | 261 pages

This report analyzes and forecasts the market for fluorochemicals at the global and regional level. The market has been forecast based on revenue (US$ Mn) from 2017 to 2025. The study includes drivers and restraints of the global fluorochemicals market.

Sep, 2017 | 300 pages

Lignosulfonates are abundantly available wood chemicals. These are commonly obtained as a by-product during the sulfite processing of wood pulp. Sodium lignosulfonate is a highly commercialized lignosulfonate. It has applications in construction, ceramics, animal feed industry, mineral powder, chemical industry, textile industry, metallurgical industry, petroleum industry, fire-retardant materials, etc.

Sep, 2017 | 180 pages

This report analyzes and forecasts the market for ZDDP Additives at the global and regional level. The market has been forecast based on revenue (US$ Mn) & Volume (Tons) from 2017 to 2025. The study includes drivers and restraints of the global ZDDP Additives market. It also covers the impact of these drivers and restraints on demand for ZDDP Additives during the forecast period. The report also highlights opportunities in the ZDDP Additives market at the global and regional level.

Sep, 2017 | 330 pages

Aftermarket fuel additives are employed to improve the performance of gasoline and diesel fuel. They are utilized for preemptive maintenance and also to reduce fuel-related issues. Aftermarket fuel additives help resolve issues such as engine performance, lost fuel economy, poor drivability, and excessive emissions. Aftermarket products are used to clean the components in which the lubricant operates, in order to enhance the performance of the lubricant itself.

Sep, 2017 | 272 pages

Biopesticides are the fertilizers that are derived from natural sources including plants, animals and minerals. Biopesticides are naturally occurring and are non-toxic compounds. Biopesticides can also synthetically derived with similar functional identities. North America dominated the biopesticides market both in terms of volume and value. It is likely to remain the dominant market during the forecast period. However, Asia Pacific biopesticides market is likely to exhibit significant CAGR compare to other regions.

Sep, 2017 | 170 pages

The global performance coating market report offers a comprehensive look at the market by profiling it by various criteria and examining the effect of all contributing factors on the market’s growth trajectory. The global performance coating market is assessed in detail to understand the hierarchy of the segments. Geographical analysis of the global performance coating market is also provided in the report to deliver key information on the best regions to invest in the market.

Sep, 2017 | 170 pages

Diesel exhaust fluids are a key component of diesel engines due to the benefit they provide in terms of reducing the polluting content of the exhaust. Rising environmental concerns have driven the adoption of innovations such as diesel exhaust fluids and are likely to propel the global diesel exhaust fluid market at a robust rate in the coming years. It is a 32.5% solution of urea in deionized water and allows diesel engines to convert the abundant nitrogen oxides in their exhausts to harmless nitrogen and water. 

Sep, 2017 | 170 pages

Isoprene, which is essentially an industrial chemical that is used to manufacture various products including synthetic rubber, automotive parts, medicine, pesticide, and other refined chemical products, such as linalool, pyrethrum, plant alcohol, VE, and perfume. The demand in the global isoprene market expected to witness a healthy growth during the forecast period of 2017 to 2022 owing to their highly useful physical, chemical, and mechanical characteristics.

Sep, 2017 | 302 pages

Refrigeration oil is a high-temperature formulation oil composed of additives and oil which provides lubrication to compressors. This oil is basically derived from either synthetic or mineral oil. Mineral oils are the prime oils used in the refrigeration systems; however, they are no longer suitable for the new refrigerants, mainly due to their insufficient lubricity and miscibility.

Sep, 2017 | 177 pages

Asphalt additives are materials incorporated into the asphalt binder inorder to enhance the performance characteristics of the asphalt product. Asphalt additives can added to the binder through hot mix, warm mix or cold mix technologies. Modified asphalt is used for road construction & paving, roofing and for construction of airports, parking lots etc. The use of recycled materials such as reclaimed asphalt (RAP) and reclaimed shingles (RAS) is increasing across the world due to growing awareness about environmental sustainability. 

Aug, 2017 | 225 pages

The report estimates and forecasts the fluorspar on the global, regional, and country levels. The study provides forecast between 2017 and 2025 based on volume (kilo tons) and revenue (US$ Mn) with 2016 as the base year. The report comprises an exhaustive value chain analysis for each of the product segments. It provides a comprehensive view of the market. The study includes drivers and restraints for the fluorspar market along with their impact on demand during the forecast period. The study also provides key market indicators affecting the growth of the market. 

Aug, 2017 | 199 pages

Surface disinfectants are chemical compound products used to deactivate or destroy microorganisms from environmental surfaces such as floors, chairs, bench tops, walls and ceilings. Depending upon their chemical composition, they can be segmented into several product types such as sodium hypochlorite, phenols, quaternary ammonium compounds (QACs), hydrogen peroxide, peracetic acid, biguanides, amphoterics, and aldehydes.

Aug, 2017 | 310 pages

Biofertilizers are the substances which make use of the living micro-organisms and are applied to seed, plant surfaces, or soil. They promote the growth of the plants by supplying adequate amount of nutrients and improve the quality and yield of the crops. The three major biofertilizers existing in the market are nitrogen fixing bio-fertilizer, phosphate mobilizing bio-fertilizer and potassium mobilizing bio-fertilizer.   

Aug, 2017 | 241 pages

This report analyzes and forecasts the market for chemical vapor deposition at the global and regional level. The market has been forecast based on revenue (US$ Mn) from 2017 to 2025. The study includes drivers and restraints of the global chemical vapor deposition market. It also covers the impact of these drivers and restraints on demand for chemical vapor deposition during the forecast period. The report also highlights opportunities in the chemical vapor deposition market at the global and regional level.

Aug, 2017 | 203 pages

Physical vapor deposition (PVD) is a vacuum coating process in which the surfaces of various objects or metals are coated with materials to form a thin protective film. This coating exhibits higher strength, durability, and corrosion-resistant properties, as compared to conventional coating process. Expansion of cutting tool and microelectronics industry is anticipated to provide lucrative opportunity during the forecast period.

Aug, 2017 | 150 pages

DCPD is primarily used in the manufacturing of composite materials. Asia Pacific accounted for a major share of the global DCPD market in 2016. Prices of DCPD depends upon the purity levels of the product which ranges from 75% to 99%. High purity DCPD is mostly used for the manufacturing of COC & COP. Demand for unsaturated polyester resins is high due to its excellent functional and mechanical properties such as low weight and corrosion and heat resistance. 

Aug, 2017 | 269 pages

Organic fertilizers are the fertilizers that are derived from natural sources including plants, animals and minerals. Typical examples of naturally occurring organic fertilizers are animal matter, animal excreta, human excreta, vegetable matter, wastes from meat processing, peat, manure, slurry, and guano. Europe dominated the organic fertilizer market in terms of both value and volume, and is likely to do the same during the period of forecast. Usage of manure based fertilizers was dominant in the market and is anticipated to remain dominant during the period of forecast. 

Aug, 2017 | 195 pages

Pond liners are impermeable membranes which are used for retaining liquids in a confined area. They are usually made up of raw materials such as Polyvinyl Chloride (PVC), Ethylene Propylene Diene Monomer (EPDM), Butyl Rubber, Polyurea, Polyester as well as Polyethylene. Pond liners can be used for lining natural water bodies such as lakes, ponds, etc. Among the artificial water sources, liners are used for creating artificial ponds or lakes in gardens or even at homes in order to add elegance and beauty to the property.

Aug, 2017 | 217 pages

Bromine is a chemical element with symbol Br and atomic number 35. It is the third-lightest halogen and it exists in the form of fuming red-brown liquid at room temperature. The commercial source of bromine is brine pools. Major producers of bromine are Israel, the U.S., and China. The mass of bromine in oceans is about 0.0033 times to that of chlorine.

Aug, 2017 | 267 pages

Polyphenylene ether alloy is an engineering thermoplastic widely employed in automotive, electrical & electronic, and industrial applications. They are also known as blended or modified polyphenylene ether alloy as other thermoplastics such as polystyrene or polyamide has been used in their formulation. They possess various characteristic features such as high dielectric properties, high insulation, and dimension stability; it also possess low shrinkage, and high temperature performance properties. 

Jul, 2017 | 251 pages

Biomethane can be produced either by anaerobic digestion or by gasification of organic matter. Organic matter fed into the biomethane plant is transformed by anaerobic process into biomethane i.e. a compound of methane (CH4) and carbon dioxide. As of 2016, Biomethane production from biogas was a single largest source, globally. Biogas is upgraded by various gas treatment processes to produce biomethane. During this upgrading process, contaminants are either absorbed or scrubbed from the gas to obtain more methane per unit volume of the residual gas.

Jul, 2017 | 234 pages

A polyether polyols is the polymeric reaction product of an organic oxide and an initiator compound, containing two or more active hydrogen atoms. Polyether polyols are made by reacting epoxides such as ethylene oxide or propylene oxide with the multifunctional initiator in the presence of a catalyst. Polyether polyols is a colorless or buff mucilaginous liquid, which is commonly employed to make foams. Polyether polyols are manufactured primarily from natural or synthetic bases.

Jul, 2017 | 332 pages

Wood preservative chemicals are chemicals that are applied on wood for preserving it from various organisms such as termites, ants, insects, fungi and other microbes. The product prevents the wood from decay, decomposition and degradation problem. The major products which are available as wood preservative chemicals are chromated arsenicals, creosote, copper based, zinc based and others.

Jul, 2017 | 178 pages

Conductive ink is applied on an object which primarily conducts electricity. . Conductive inks for printed and flexible electronics are one of the prime materials. Growing proliferation of printed electronics in different industries is one of the major driving factors for the market. Printed electronics can be used in a wide range of applications which include organic photovoltaic cells (OPVs), and organic light emitting diodes (OLEDs) among others. 

Jul, 2017 | 229 pages

Polyisobutylene (PIB) is a commercial polymer or elastomer that is used in a number of applications in various industries due to its thermal stability, flexibility, and impermeability to gases. Polyisobutylene an elastomer or synthetic rubber is the only rubber that is impermeable to gases, and was first developed in 1930’s. Polyisobutylene is used in the production of tubeless tires due to its ability to retain air for longer periods.

Jul, 2017 | 172 pages

Electromagnetic interface (EMI) shielding is an enclosure or coating to reduce the electromagnetic field by blocking the field with conductive material or magnetic material. This EMI shielding can reduce electromagnetic fields, electrostatic fields and the coupling of radio waves. In addition, the amount of electromagnetic interfaces reduction depends upon the material thickness and the size of the shielded volume among others.

Jun, 2017 | 171 pages

Propanol is a colorless alcohol typically available in two types of isomers: iso-propanol and n-propanol. Isopropanol was one of the first petrochemicals discovered in the ’1960s.  It is used in various applications such as cosmetics, personal care products, deicers, resins, paints, pharmaceuticals, inks, and adhesives, as also as a chemical intermediate to manufacture various chemicals such as methyl isobutyl ketone (MIBK), isopropyl esters, isopropyl amines, acetone, glycerol, and isopropyl acetates.

Jun, 2017 | 85 pages

Concrete floor coating is the covering applied to cured concrete in order to make the surface last longer. These coatings offer corrosion resistance property. Advantages of using concrete floor coatings include esthetic look, durability, ease of maintenance, ability to be customized, long term cost savings, health benefits and low installation cost. Increase in the number of construction projects and rise in demand for green technology are expected to fuel the market for concrete floor coatings.

Jun, 2017 | 230 pages

Independent lubricant manufacturers usually purchase base oils from major oil suppliers since they do not have their own refineries. In order to provide lubricants for various end-user industries such as industrial and automotive, manufacturers blend these oils with additives to make lubricants.

Jun, 2017 | 83 pages

Silicone defoamer is a chemical additive used in various end-use industries such as pharmaceutical, metalworking fluids for removal of foam. Silicone defoamer is additives that reduce and hamper formation of foam in industrial processes. Silicone defoamers are generally insoluble in the foaming medium and possess surface active properties. It offer low viscosity and spread rapidly on the foamy surface. 

May, 2017 | 130 pages

Potassium iodide is a crystalline salt which is soluble in water and utilized mainly in the pharmaceutical industry. It is one of the most commercially significant iodide compounds with the demand from various industries such as pharmaceutical, food and textiles. Potassium iodide is mentioned in the World Health Organization’s List of Essential Medicines, the most important medication needed in a basic health system. 

May, 2017 | 168 pages

Transformer oil is an oil used in oil filled transformers for insulation purposes. It is also used as a coolant and to prevent arcing and corona discharges in a transformer. The report provides in-depth analysis and forecast of the transformer oil market on the global as well as on regional level. It further includes value chain analysis to help understand the industry thoroughly. 

May, 2017 | 195 pages

Lubricants play a vital role in the reduction of friction and wear and tear of operating parts of different machines. The movement of certain mechanical parts is operational only in the presence of lubricants. Marine lubricants minimize the wear and tear between different machine parts and improve their output efficiency. Marine lubricants have numerous uses in the shipping industry, as a result of which different types of engine oil, hydraulic oil, and grease are developed.

Apr, 2017 | 185 pages

Aroma chemicals belong to a group of molecules which are used in fragrance ingredients. They comprise of artificial, natural identical, and natural molecules. Around 3000 types of distinct molecules are used for the production of fragrance compositions. Aroma chemicals have wide range of applications, most common of them include fine fragrance, cosmetics, and toiletries. They are also used as odorizer to impart fragrance to odorless substances that can be dangerous for instance, natural gas, propane, etc.

Apr, 2017 | 119 pages

UV disinfection is physical disinfection method. There has been a substantial increase in the adoption of UV disinfection technology to carry out disinfection. The adoption of physical disinfection methods has grown on account of their  chemical free  approach of disinfection. The disinfection technology using UV radiations finds its application in disinfection of water, wastewater, air, food and beverages, and surfaces.

Apr, 2017 | 123 pages

Bentonite is a colloidal clay mineral, formed by the alteration of volcanic ash. The two most common type of bentonite available in the market are: sodium bentonite and calcium bentonite. Sodium bentonite is often known as swelling bentonite, due to its high water absorption property. Bentonite are employed in various applications such as binding, sealing, and filling. Owing to its properties, it is used in various applications of foundry, cat litter, pelletizing, drilling, construction, paper, and cosmetics.

Apr, 2017 | 155 pages

Cubic boron nitrates (CBN) is a synthetically manufactured material, which is second to only diamond in hardness. One of its common synthesis processes is direct conversion of hexagonal boron nitride to CBN by treating at high pressure and temperature. CBN abrasives possess characteristics that exceed the values of conventional abrasives; for example, high strength and hardness, resistance to chemicals, heat, and abrasion; and ability to maintain the sharp cutting edges during use.

Apr, 2017 | 58 pages

Hydraulic fluid connectors are usually metal connectors used to join any hydraulic fluid conductor such as hose, pipe, or tube to other hydraulic devises which may include hydraulic pumps, hydraulic motor, reservoir, cylinders, actuators or other hoses and tubes. These connectors are vital for conveying hydraulic fluids from one device to another. These connectors are extensively used in aerospace realm for crucial hydraulic systems such as flight controls, jet engine pumps, landing gear mechanism etc.

Apr, 2017 | 147 pages

Phosphorus trichloride, a colorless or slightly yellow fuming liquid, retains a pungent odor reminiscent to that of hydrochloric acid. It is generally used as a chemical intermediate in the manufacturing of agrochemicals and flame retardants. It is commercially available as pure grade and analytical reagent grade. In terms of application, agrochemicals/pesticides and phosphorus oxychloride held  majority  share in the global phosphorus trichloride market in 2015. 

Apr, 2017 | 140 pages

The report estimates and forecasts the PTFE market on the global, regional, and country levels. The study provides forecast between 2016 and 2024 based on volume (kilo tons) and revenue (US$ Mn) with 2015 as the base year. The report comprises an exhaustive value chain analysis for each of the end-use segments. It provides a comprehensive view of the market. The study includes drivers and restraints for the PTFE market along with their impact on demand during the forecast period.

Mar, 2017 | 125 pages

Polyethylene terephthalate resin is a petrochemical compound which is derived from polycondensation reaction of purified terephthalic acid (PTA) and monoethylene glycol (MEG). PET resin is widely used in food and beverages packaging industry for packaging water, soft drinks, juices, ready-to-cook food and other products. The PET packaging has replaced conventional glass packaging owing to features like its flexibility, lightweight, low cost, and easy handling. Beverages is an important precursor of PET, utilized for packaging water, soft drinks, juices, and similar other products.

Mar, 2017 | 150 pages

Rubber processing chemicals belong to a group of specialty chemicals added to rubber to make it commercially viable for usage in various application. They are used to impart different characteristics to rubber such as resistance to ozone, heat, mechanical stress, oxidation, and others. They exhibit properties such as resilience, abrasion resistance, flex resistance, hardness, and tensile strength for product-specific end-use applications.

Feb, 2017 | 90 pages

Polyetheretherketone (PEEK) is used in several challenging applications that require outstanding physical and chemical material properties. The polymer has properties similar to other high-performance plastics but with a continuous use temperature range that is significantly larger than the other plastics. PEEK is used in a wide range of application segments including automotive, industrial, aerospace, electrical & electronics, medical and other applications. 

Feb, 2017 | 272 pages

Preservative blends are blends of preservative chemicals that are used to prevent fermentation and decomposition of product by microbial growth or other climatic conditions. It helps in extending the shelf life of the products to maintain the unique aroma, color and consistency of the product. The report estimates and forecasts the preservative blends market on the global and regional levels.

Feb, 2017 | 135 pages

This report analyzes and forecasts the market for solder flux at the global and regional level. The market has been forecast based on volume (tons) and revenue (US$ Mn) from 2016 to 2024. The study includes drivers and restraints of the global solder flux market. It also covers the impact of these drivers and restraints on demand for solder flux during the forecast period. The report also highlights opportunities in the solder flux market at the global and regional level.

Feb, 2017 | 125 pages

Ag paste is a uniformly dispersed mixture with multiple inorganic and organic components. It is well known for its highest electrical conductivity, thermal conductivity and reflectivity. Ag paste is produced from pure silver metal which is extracted from the earth’s crust. Silver is also produced as a byproduct of gold, copper, zinc refining, and lead. It is considered as one of the precious metal. Ag paste is mainly used in end use sectors such as solar cells, electrical & electronic components, and automobiles. 

Feb, 2017 | 161 pages

Surfactants or surface active agents are organic compounds produced from petrochemical raw materials such as ethylene and benzene or oleo-chemical raw materials such as palm oil or coconut oil. It is commercially available as cationic, anionic, amphoteric, non ionic and other (silicone, etc.) surfactants. In terms of application, personal care and paints & coatings held majority share in the Asia Pacific surfactants market.

Jan, 2017 | 118 pages

Sodium borohydride is type of inorganic compound which is used as a reducing agent in chemical process. Rising research & development activities related to medicines and increase in use of recycle paper are the major drivers that drives the growth of sodium borohydride market. North America dominates the sodium borohydride market in terms of demand however, Asia Pacific is expected to grow at highest CAGR during the forecast period. 

Jan, 2017 | 70 pages

Isononyl acrylate is a specialty type of acrylate, which is obtained by the reaction of acrylic acid and isononyl alcohol. Laboratory practices have concluded that isononyl acrylate has the minimum glass transition temperature, amongst all commercially available acrylates. Rising demand for isononyl acrylate in the adhesives industry in various regions is likely to propel the isononyl acrylate market in the near future. Isononyl acrylate is also used in paints & coatings application owing to its thermal properties such as low glass transition temperature.

Jan, 2017 | 170 pages

This report analyzes and forecasts the market for anhydrous aluminum chloride at the global and regional level. The market has been forecast based on volume (tons) and revenue (US$ Mn) from 2016 to 2024. The study includes drivers and restraints of the global anhydrous aluminum chloride market. It also covers the impact of these drivers and restraints on demand for anhydrous aluminum chloride during the forecast period.

Jan, 2017 | 92 pages

Benzaldehyde derivatives are the compounds which are derived from one of the simplest forms of aldehyde, benzaldehyde. These derivatives are found both in natural and synthetic forms. The commonly used benzaldehyde derivatives in chemical industry are cinnamic acid, benzoic acid, sodium benzoate and benzyl alcohol. Benzaldehyde derivatives can be formed from benzaldehyde via oxidation, reduction and disproportionation reactions.

Jan, 2017 | 242 pages

Oleate Esters are known as the esters or salts of oleic acids. Esters are synthesized by the reaction between alcohol and oleic acids in presence of catalysts. They are obtained from natural sources such as animal fats and vegetable oils, most preferably palm oil, canola oil, soybean oil, etc. As they are obtained from natural raw materials, they are preferred over other chemical compounds.

Jan, 2017 | 115 pages

This research study analyzes the market for butane gas cartridges in terms of revenue (US$ Mn). The butane gas cartridges market has been segmented on the basis of application and region. The report features a detailed segmentation with market growth forecasts from 2016 to 2024. 2015 has been considered the base year and 2016 the estimated year, while all forecasts have been given for the period from 2016 to 2024.

Dec, 2016 | 175 pages

This report analyzes and forecasts the market for Agricultural adjuvants at the global and regional level. The market has been forecast based on volume (tons) and revenue (US$ Mn) from 2016 to 2024. The study includes drivers and restraints of the global Agricultural adjuvants market. It also covers the impact of these drivers and restraints on demand for Agricultural adjuvants during the forecast period. 

Dec, 2016 | 120 pages

Xanthan gum is a polysaccharide derived from a bacteria called xanthomonas campestris through a pure-culture fermentation process. The xanthomonas campestris strain used to yield xanthan gum is non-pathogenic and non-toxic to animals and humans. Therefore, it is preferred over other substitutes in food applications. Xanthan gum is primarily employed in end-user industries such as oil & gas and food & beverage. 

Dec, 2016 | 106 pages

Industrial protective clothing fabrics are used to manufacture protective clothing for industrial applications. These fabrics can possess properties such as flame resistance, cut resistance, chemical resistance and arc resistance. Protective clothing made from these fabrics are used protect workers exposed to extreme heat, flame, arc flash, and molten metals on a daily basis. Protective clothing is used in a wide range of application segments including oil & gas, utilities, electricians, combustible dust, welding, molten metals, food services and mining.

Nov, 2016 | 101 pages

This research study analyzes the market for North America printing inks in terms of revenue (US$ Mn) and volume (Kilo Tons). The North America printing inks market has been segmented on the basis of product, application, end-use, and country. The report features a detailed segmentation with market growth forecasts from 2016 to 2024. 2015 has been considered the base year and 2016 the estimated year, while all forecasts have been given for the period from 2016 to 2024.

Nov, 2016 | 145 pages

This report analyzes and forecasts the market for Methyl Isobutyl Ketone at the global and regional level. The market has been forecast based on volume (tons) and revenue (US$ Mn) from 2016 to 2024. The study includes drivers and restraints of the global Methyl Isobutyl Ketone market. It also covers the impact of these drivers and restraints on demand for Methyl Isobutyl Ketone during the forecast period. The report also highlights opportunities in the Methyl Isobutyl Ketone market at the global and regional level.

Nov, 2016 | 114 pages

Sulfone polymers are high performance thermoplastics manufactured through the condensation polymerization process. Sulfone polymers are primarily employed in the manufacture of components which require high thermal and chemical stability such as automotive oil circuits, oil pistons and gears, medical devices such as dialyzers, nebulizers and medicals implants. Rising demand for sulfone polymers in the medical industry in various regions is likely to propel the sulfone polymer market in the near future.

Oct, 2016 | 75 pages

MTBE is a flammable, highly volatile colorless liquid that is sparingly soluble in water. It is one of the octane boosters used in gasoline blending across the globe. MTBE is typically produced by the chemical reaction of isobutylene and methanol in the presence of heat and catalyst. It is used in several end-user industries through its downstream products. However, in terms of application, the petroleum blending segment accounts for significant share of the MTBE market.

Oct, 2016 | 67 pages

Butene-1 is a nontoxic, noncorrosive and colorless gas or liquid with slightly olefin odor. It is an organic chemical compound and is one of the linear alpha olefins. It is easily condensable and highly flammable. Butene-1 is generally produced by a variety of methods such as refinery operations, steam cracking of C4 hydrocarbons, butane dehydrogenation, alfa olefin manufacturing (produced as a co-product), catalytic ethylene dimerization, butyl alcohol dehydration, and pyrolysis of butyl acetate and butyl chloride. 

Oct, 2016 | 195 pages

This research study analyzes the market for 2-methylpropene in terms of revenue (US$ Bn) and volume (Kilo Tons). The 2-methylpropene market has been segmented on the basis of product, application, and geography. Geographical segmentation includes regions, which are further divided into 19 countries. 

Oct, 2016 | 97 pages

Paraxylene is an aromatic hydrocarbon, which is used as feedstock to manufacture industrial chemicals, notably purified terephthalic acid (PTA) and dimethyl terephthalate (DMT).  PTA and DMT are further employed in the manufacture of polyethylene terephthalate (PET) polyester.

Oct, 2016 | 70 pages

Printing inks is a liquid or paste that contains pigments or dyes mixed with oil or solvents or water. Printing inks are used to color surfaces such as paper, cardboard, and ceramic tiles to produce an image, text, or design. These inks can be classified into liquid and paste. Liquid inks are employed in gravure and flexographic printing processes, while paste inks are used in offset printing process. 

Sep, 2016 | 186 pages

TPO, a light weight material, is a major product in thermoplastic elastomers family. It has one of the lowest specific gravities among all the thermoplastic elastomers. TPO is widely used in automotive interior and exterior components. It is employed in automotive bumpers, dashboard skins, door panels, and instrument panels. TPO is extensively used in the production of roofing membrane systems and door panels in the building & construction industry. 

Sep, 2016 | 68 pages

This research study analyzes the market for sulfur dioxide in terms of revenue (US$ Mn) and volume (Million tons). The sulfur dioxide market has been segmented on the basis of application, end use, and geography. The geographical segmentation includes countries such as the U.S. and Canada. The report features a detailed regional segmentation with market growth forecasts for the years 2016−2024.

Sep, 2016 | 267 pages

Refinery catalysts are widely employed in the refinery units to remove the impurities such as sulfur, nitrogen and other carbon compounds from the fuels. Stringent environmental regulations on fuel emissions across the globe is estimated to boost the demand for global refinery catalysts market. Zeolites are estimated to expand at a significant rate during the forecast period. 

Sep, 2016 | 236 pages

This research study analyzes the market for algae in terms of revenue (US$ Mn) and volume (tons). The algae market has been segmented on the basis of application, cultivation technology, and geography. The geographical segmentation includes regions, which are further divided into 15 countries. The report features a detailed regional segmentation with market growth forecasts for the years from 2016 to 2024. 

Sep, 2016 | 142 pages

Selenium sulfide is sulfide salt of selenium. It is present in bright orange or yellow-orange powder or tablet form at room temperature. It is insoluble in water or ether. It can be dissolved in carbon disulfide. Selenium sulfide decomposes in alcohol and can get ignited when it comes into contact with silver oxide. When heated, it releases toxic fumes of sulfur oxide and selenium.

Sep, 2016 | 135 pages

Coatings which are generally used for pre-owned cars for timely repair and maintenance of appearance are called automotive refinish coatings. Automotive refinish coatings are applied to prevent deterioration of vehicle body parts and components from stone chips, rust, and debris. Automotive refinish coatings are used to maintain the durability and appearance of the vehicle. 

Sep, 2016 | 363 pages

This research study analyzes the market for solvent-based inks in terms of revenue (US$ Mn) and volume (kilo tons). The solvent-based inks market has been segmented on the basis of product, printing type, end use applications, and geography. The report features a detailed regional segmentation with market growth forecasts for the 2016−2024 period. 

Aug, 2016 | 85 pages

The report analyzes and forecasts the piperonyl butoxide market on the regional level. The study provides historic data of 2015 along with forecast from 2016to 2024 based on volume (tons) and revenue (US$ thousand).

Aug, 2016 | 143 pages

Benzyl alcohol is an aromatic alcohol, which is metabolized into benzoic acid inthe human body. Benzyl alcohol is manufactured by hydrolysis of benzyl chloride in the presence of soda ash through the toluene oxidation process. It can also be produced from benzyl acetate by hydrolysis or by trans esterification with methanol. Benzyl alcohol plays an important role in a wide range of end-user industries such as personal care, food & beverages, pharmaceutical, and paints & coatings.

Aug, 2016 | 233 pages

Bi-axially oriented polypropylene (BOPP) is polypropylene based film or sheet stretched across two axes in a sequential manner. BOPP films are manufactured using tubular film and stenter processes. Commercially, stenter process is preferred to the tubular process considering the inherent advantages such as mass production and extensive thin films.

Aug, 2016 | 135 pages

Soap noodles are base soaps used in the manufacture of soap bars. They are produced from the reaction between fatty acid and sodium hydroxide. Soap noodles, added with pigments, fragrance and other components are used to produce different types of soap. Vegetable oils such as coconut oil or olive oil, palm oil, and animal fats (tallow) are major raw materials required for the manufacturing of soap noodles. 

Jul, 2016 | 142 pages

Ethylene propylene diene monomer (EPDM) is a synthetic rubber typically manufactured through the solution polymerization process. It is produced using ethylene and propylene in the presence of dienes and catalysts. EPDM rubbers are primarily employed in the manufacture of light weight components such as automotive bumpers and automotive interiors in the automotive industry.

Jul, 2016 | 191 pages

Ethanolamines are organic amino alcohol manufactured by the reaction between ethylene oxide and ammonia. Three types of ethanolamines are produced commercially - monoethanolamines (MEA), diethanolamines (DEA), and triethanolamines (TEA). Production of MEA, DEA, and TEA depends on the number of ethylene oxide molecules reacting with single molecule of ammonia.

Jul, 2016 | 151 pages

This report analyzes and forecasts the market for tert-butanol at the global and regional level. The market has been forecast based on volume (kilo tons) and revenue (US$ Mn) from 2016 to 2024. The study includes drivers and restraints of the global tert-butanol market. It also covers the impact of these drivers and restraints on demand for tert-butanol during the forecast period. 

Jun, 2016 | 130 pages

Flame resistant fabrics are used to manufacture apparels, garments, and furnishings for a wide range of industries such as oil & gas, transportation, health care, military, and hospitality. Companies provide a broad array of flame resistant fabrics to maximize flexibility in design, engineering, and cost, while meeting government regulations. 

Jun, 2016 | 143 pages

Various types of humic substances such as humic acid, humus, humate, fulvic acid, organic matter, and humin play an important role in plant nutrition and soil fertility. Humic substances provide an economical and concentrated form of organic matter that can possibly act as a replacement for humus depletion, which is caused as a result of the conventional fertilization methods. 

Jun, 2016 | 185 pages

This report provides forecast and analysis of the electroactive polymers market on the global and regional level. The study provides historic data of 2015 along with forecast from 2016 to 2024 based on volume (kilo tons) and revenue (US$ Mn). It includes drivers and restraints of the electroactive polymers market along with their impact on demand during the forecast period. The report also comprises the study of opportunities available in the market for electroactive polymers on the global and regional level.

Jun, 2016 | 227 pages

The report analyzes and forecasts the rheology modifiers market on the global and regional level. The study provides historical data of 2015 along with the forecast from 2016 to 2024 based on volume (kilo tons) and revenue (US$ Mn). The study includes drivers and restraints for the rheology modifiers market along with their impact on demand during the forecast period. 

Jun, 2016 | 244 pages

This report analyzes and forecasts the market for SLS, SLES, and LAS at the global and regional level. The market has been forecast based on volume (kilo tons) and revenue (US$ Mn) from 2016 to 2024. The study includes drivers and restraints of the global SLS, SLES, and LAS market.

May, 2016 | 195 pages

This report analyzes and forecasts the market for thermic fluids at the global and regional level. The market has been forecast based on volume (kilo tons) and revenue (US$ Mn) from 2016 to 2024. The study includes drivers and restraints of the global thermic fluids market. It also covers the impact of these drivers and restraints on demand for thermic fluids during the forecast period. 

May, 2016 | 120 pages

The study provides a decisive view of the copper oxychloride market by dividing it into application and regional segments. Application segments have been analyzed based on current trends and future potential. Regional segmentation includes current and forecast demand for copper oxychloride in North America, Europe, Asia Pacific, Latin America, and Middle East & Africa. These regions have been further sub-segmented into major countries and sub-regions with relevance to the market. Segmentation also includes demand for individual application type in all the regions and countries.

May, 2016 | 284 pages

This report analyzes and forecasts the market for excipients at the global and regional level. The market has been forecast based on volume (tons) and revenue (US$ Thousand) from 2015 to 2023. The study includes drivers and restraints of the global excipients market. It also covers the impact of these drivers and restraints on demand for excipients during the forecast period.

Apr, 2016 | 184 pages

Polyolester lubricants (POE) are oils that possess the ability to operate at a wide temperature range (-75 F to 600 F). These lubricants demonstrate various properties such as low volatility, good oxidative stability, and high solvency and dispersibility. This makes POE suitable for usage in a wide range of applications. Furthermore, the inclusion of bio-based raw materials makes these lubricants less harmful environmentally vis-à-vis the existing synthetic lubricants. 

Apr, 2016 | 201 pages

Controlled release fertilizers are part of enhanced efficiency fertilizers. These are granulated fertilizers that release nutrients gradually into the soil. Controlled release fertilizers are usually coated or encapsulated with inorganic or organic materials that regulate the rate, pattern, and duration of plant nutrient release.

Apr, 2016 | 198 pages

Solvents are liquids with the capability to dissolve other materials without any chemical change in the solvent or the material. Based on the type or source of raw material, solvents can be classified into bio-based or petroleum-based. Petroleum-based solvents emit high amount of volatile organic compounds during their manufacturing process.

Apr, 2016 | 126 pages

Metalworking fluids are also known as cutting fluids. They are used as coolant and lubricants in metalworking processes such as machining and fabrications. They are different types of metalworking fluids employed in different applications such as metal removal, metal forming, metal protecting and metal protecting fluids.

Mar, 2016 | 137 pages

Hydrogen peroxide (hereafter, H2O2) measurement devices are used for detection of hydrogen peroxide in gaseous and aqueous applications. Mostly, these devices are used in detection of hydrogen peroxide vapor (HPV) in the HPV decontamination applications. This is important, as the excess presence of HPV is unsafe to human exposure. 

Mar, 2016 | 190 pages

This report analyzes and forecasts the market for epichlorohydrin (ECH) at global and regional level. The market has been forecast based on volume (kilo tons) and revenue (US$ Mn) from 2015 to 2023. The study includes drivers and restraints of the global ECH market. It also covers the impact of these drivers and restraints on demand for ECH during the forecast period. 

Mar, 2016 | 271 pages

The report analyzes and forecasts the fuel additives market on the global and regional level. The study provides historical data for 2014 along with the forecast from 2015 to 2023 based on volume (kilo tons) and revenue (US$ Mn). The report provides a decisive view of the fuel additives market by segmenting it in terms of product, application, and region. 

Mar, 2016 | 183 pages

Fatty alcohols are aliphatic alcohols that are predominantly linear and monohydric. These can be saturated or have one or more double bonds. Based on the raw materials used, fatty alcohols are chiefly classified as synthetic or natural. Synthetic fatty alcohols are produced from petrochemicals such as olefins and paraffin, while natural fatty alcohols are based on renewable resources such as fats, oils, and waxes of plant or animal origin. 

Mar, 2016 | 155 pages

Controlled release fertilizers are a part of enhanced efficiency fertilizers. They are granulated fertilizers that release nutrients gradually into the soil. Controlled release fertilizers are usually coated or encapsulated with inorganic or organic materials that regulate the rate, pattern, and duration of plant nutrient release. Common polymer materials used for coating are polysulfone (PSF), cellulose acetate (CA), and polyacrylonitrile (PAN).

Mar, 2016 | 160 pages

Potassium permanganate, also known as potassium of potash, is a compound of potassium, manganese, and oxygen. It is used in waste treatment, aquaculture, metal processing, chemical manufacturing & processing, and air & gas purification.  Potassium permanganate is also employed as a bleaching and coloring agent in tanning & textile industries. 

Feb, 2016 | 170 pages

Ethylene vinyl acetate (EVA) is a co-polymer of ethylene and vinyl acetate (VA) monomer, wherein the weight percentage of VA varies from 1% to 40%. Ethylene vinyl acetate offers excellent functional properties such as flexibility, toughness, elasticity, impact strength, and adhesive strength. It provides resistance to puncture, environmental stress cracks, and UV radiation.

Feb, 2016 | 247 pages

The report analyzes and forecasts the microspheres market on the global and regional level. The study provides historical data of 2014 along with forecast from 2015 to 2023 based on volume (Tons) and revenue (US$ Mn). 

Feb, 2016 | 521 pages

Chlorinated paraffins are chlorinated n-alkanes or paraffins used as metalworking fluids and secondary plasticizers in the manufacture of PVC compounds. These are typically classified based on the grades or carbon chain lengths such as l-grade, m-grade, and h-grade. Each of these grades defines the length of carbon chain such as short chain chlorinated paraffins, medium chain chlorinated paraffins, and long chain chlorinated paraffins. 

Feb, 2016 | 133 pages

This report analyzes and forecasts the market for graphene at the global and regional level. The market has been forecast based on revenue (US$ Mn) from 2015 to 2023. The study includes drivers and restraints of the global graphene market. It also covers the impact of these drivers and restraints on demand for graphene during the forecast period.

Jan, 2016 | 126 pages

Clear brine fluids are industrial fluids used in various operations, such as completion, work-over, and drilling, in the oil & gas industry. These fluids are specifically manufactured to control formation pressure as well as reduce damage in the reservoir. 

Jan, 2016 | 141 pages

Palm kernel oil and coconut oil based natural fatty acids are medium-chain oleochemicals that exhibit excellent performance as surfactants. Natural fatty acids have potential industrial use as an environmentally sustainable material owing to their extraction from natural and renewable sources. Natural fatty acids are employed in numerous end-user industries such as detergents, personal care, plastics, rubber, and others.

Jan, 2016 | 137 pages

Carboxylic acids based esters are usually formed when alcohol reacts with carboxylic acid. It is a type of condensation reaction and popularly known as “Esterification” in organic chemistry. Carboxylic acids based esters are notably popular among paints & coatings manufacturers as these can replace hazardous air pollutants (HAP) in the formulation of paints, coatings, and inks.

Jan, 2016 | 87 pages

Graft polyols are a stable colloidal dispersion of styrene acrylonitrile polymer particles in polyether polyols. These are widely used in the manufacture of flexible polyurethane foams. Graft polyols improve the load-bearing properties of flexible foam by modifying the viscosity and density. They also impart high resilience in polyurethane foams. Polyurethane foams formulated from graft polyols are extensively used in carpets, cushions, mattresses, furniture, automotive seating, and protective packaging. 

Jan, 2016 | 56 pages

TCD Alcohol DM is used in the production of UV cure coatings, UV inkjet inks, and UV adhesives. It is also employed in opto-electronic applications. It is a colorless, highly viscous substance at room temperature with a characteristic odor. It is sparingly soluble in aliphatic, aromatic hydrocarbons, and water.

Jan, 2016 | 184 pages

Cresols are aromatic organic compounds of monomethyl phenols that are widely used as precursors or chemical intermediates in the production of polymer resins, plasticizers, antioxidants, solvents, vitamin E, rubbers, pharmaceuticals, fragrances, dyes, and other chemicals. There are three forms of cresols: ortho-cresol (o-cresol), meta-cresol (m-cresol), and para-cresol (p-cresol). 

Dec, 2015 | 184 pages

Coil coatings are multilayered complex coatings of resins, pigments, and primers over metal rolls. Metal substrates (usually steel and aluminum) are roll coated in order to provide weather resistance and corrosion resistance. Coated metal rolls, sheets, and strips are then molded into necessary shapes. 

Dec, 2015 | 69 pages

Lubricants are indispensable for the proper functioning of machinery. Lubricants are typically used to reduce friction and wear & tear between different moving parts of machines. Lubricants aid in reducing the downtime of operating machines and thereby raise the overall productivity. 

Dec, 2015 | 185 pages

Anti-static agents are used as plastic additives to minimize static buildup on a plastic substrate. Ethoxylated alkamines, quaternary ammonium salts, alkylsulfonate, and fatty acid esters are key product segments of the global anti-static agents market. 

Nov, 2015 | 140 pages

This report analyzes and forecasts the specialty chemicals market on the global and regional level. The study provides historic data of 2014 along with forecast from 2015 to 2023 based on revenue (US$ Bn).

Nov, 2015 | 171 pages

Nanoclays are layered mineral silicates that are divided into various classes depending on their chemical composition and morphology. Commonly used commercial nanoclays include montmorillonite, bentonite, kaolinite, hectorite, and halloysite

Nov, 2015 | 120 pages

Manganese carbonate is a water-insoluble source of manganese that can be converted into other manganese compounds such as manganese oxide by calcination. Manganese carbonate occurs naturally as mineral rhodochrosite. It is available in variety of colors such as pink, red, grey, yellow, and brown. 

Oct, 2015 | 185 pages

This report analyzes and forecasts the personal care ingredients market on the global and regional level. The study provides historic data of 2014 along with forecast from 2015 to 2023 based on volume (kilo tons) and revenue (US$ Mn).

Oct, 2015 | 184 pages

Surfactants is an organic compound that constitutes both lyophilic (solvent-loving) group and lyophobic (solvent-fearing) group in the molecule. Thus, the existence of polar and non-polar group forms an aggregate called ‘Micelles’ in an aqueous solution. 

Oct, 2015 | 163 pages

Titanium dioxide is a white colored, solid, inorganic material with high thermal stability and poor solubility. Major raw materials used in the production of titanium dioxide include ilmenite and rutile. Major processes used in the manufacturing of titanium dioxide include sulfate and chloride processes.

Sep, 2015 | 173 pages

Cellulose acetate is produced by acetylation of cellulose with acetic acid by using sulfuric acid as the catalyst. Cellulose acetate is extensively consumed in various end-user applications such as cigarette filters, textile & apparel, photographic films, tapes & labels, and extrusion & molding. 

Sep, 2015 | 290 pages

Demand for polyols and polyurethane is primarily due to growth in packaging and agriculture industries across the globe. Asia Pacific dominates the global market for polyols and polyurethane. This report analyzes, estimates, and forecasts demand for polyols and polyurethane on a global and regional level for an eight-year period from 2015 to 2023 in terms of volume and revenue. 

Sep, 2015 | 125 pages

This report analyzes and forecasts the market for capric acid at the global and regional level. The market has been forecast based on volume (kilo tons) and revenue (US$ Mn) from 2015 to 2023. The study includes drivers and restraints of the global capric acid market. It also covers the impact of these drivers and restraints on demand for capric acid during the forecast period. The report also highlights opportunities in the capric acid market at the global and regional level. 

Sep, 2015 | 197 pages

Emulsion polymers are produced by polymerization followed by emulsification of monomers such as styrene and butadiene and some co-monomers such as vinyl acetate. Emulsion polymers are widely employed in various end-user industries such as paints & coatings, paper & paperboard, adhesives, and textiles & non-woven. Paints & coatings was the largest end-user segment of the emulsion polymers market in 2014. 

Aug, 2015 | 151 pages

This report covers the analysis and forecast of the sodium hydrosulfite market on the global and regional level. The study provides historic data of 2014 along with forecast between 2015 and 2023 based on volume (kilo tons) and revenue (US$ Mn). 

Aug, 2015 | 129 pages

Polypropylene is a thermoplastic polymer that can be readily formed by catalytic polymerization of propylene. Manufacture of polypropylene is largely dependent on the availability of raw materials. This, in turn, is dependent on crude oil and natural gas reserves. Polypropylene possesses beneficial properties such as high surface hardness, good tensile strength, and strong chemical resistance.

Aug, 2015 | 117 pages

The report analyzes and forecasts the benzaldehyde market on the global and regional level. The study provides historical data of 2014 along with forecast from 2015 to 2023 based on volume (Tons) and revenue (US$ Mn). The study includes drivers and restraints for the benzaldehyde market along with their impact on demand during the forecast period. 

Aug, 2015 | 150 pages

Amorphous polyalphaolefin (APAO) for hot melt (homopolymers and copolymers) adhesives are one of the recently introduced raw materials commonly used in the production of adhesives. APAO hot melt adhesives are primarily employed in personal hygiene products, woodworking, paper and packaging, product assembly, and many others. 

Aug, 2015 | 121 pages

Monoethylene glycol is a colorless, odorless, and barely viscous liquid that is miscible in water, aldehydes, alcohols, and many other organic compounds. It is an organic compound used primarily as a raw material in the manufacture of polyethylene terephthalate resins (PET), which are employed in bottles and polyester fibers in the fabric industry.

Aug, 2015 | 147 pages

Bionematicides is a formulation of bacterial and fungal spores to control crop infestation by nematodes. Nematodes infect almost all the crops sown across the globe, thereby affecting the crop yield. The biological method of controlling nematodes is advantageous as they do not affect the environment by remaining in the soil for a long time.

Jul, 2015 | 110 pages

This report covers analysis and forecast of the paraformaldehyde market on a global and regional level. The study provides historic data of 2014 along with forecast for the period between 2015 and 2023 based on volume (kilo tons) and revenue (US$ Mn). 

Jul, 2015 | 115 pages

Itaconic acid is a white, crystalline, unsaturated dicarboxylic acid that often easily degrades into soil. It is one of the promising chemicals within the group of organic acids. Itaconic acid is stable at room temperature; however, due to the presence of two carboxylic groups, it effectively takes part in the co-polymerization reaction. Itaconic acid is mostly produced by the fungal fermentation of glucose syrup.

Jul, 2015 | 185 pages

Carboxylic acids are organic acids containing carboxyl group (-COOH). These acids are named according to the number of carbon atoms present in the molecule. Carboxylic acids are primarily used in the manufacture of soaps, detergents, pharmaceuticals, rubber, plastics, dyes, textile, perfumes, and animal feed. 

Jul, 2015 | 206 pages

This report analyzes and forecasts the market for lactic acid and polylactic acid at the global, regional, and country level. The market has been forecast based on volume (Kilo Tons) and revenue (US$ Mn) from 2015 to 2023. The study includes drivers and restraints of the global lactic acid and polylactic acid market.

Jul, 2015 | 102 pages

Sulfosuccinates are metal (sodium) salts of alkyl ester of sulfosuccinic acid. Sulfosuccinates are used in various cleansing formulations, household detergents & cleaners, industrial cleaners, textiles, pharmaceuticals, polymers, paints & coatings, leather, printing, and agriculture applications. 

Jun, 2015 | 129 pages

Lignin is the substance that gives plants their ‘woody’ structure. The global lignin market is driven by diverse applications of lignin across several industries such as cement/concrete, paper, cosmetics, metallurgy, and animal feed.

Jun, 2015 | 150 pages

Polyalkylene glycols (PAG) are polymeric compounds of one or more alkylene oxide (ethoxide) monomers connected through -R–O- ether linkages. PAGs are also known as polyether polyols, polyglycols, polyethers, and polyalkylene oxides in the industry.

Jun, 2015 | 118 pages

Demand for toluene diisocyanate is primarily fueled by growth in bedding and mattresses and automotive industries across the globe. Asia Pacific dominates the global market for toluene diisocyanate. This report by Transparency Market Research analyzes, estimates, and forecasts the demand for toluene diisocyanate on a global and regional level for an eight-year period from 2015 to 2023 in terms of volume and revenue.

Jun, 2015 | 152 pages

Solvents is a routinely used term in organic chemistry. Solvents are used to dissolve or disperse solid materials. Aromatic solvents constitute benzene, xylene, toluene, and other aromatic solvents such as solvent naphtha. These are widely produced organic chemicals in the petroleum refining industry through fractional distillation of petroleum stocks (also known as feedstock). 

May, 2015 | 129 pages

This report analyzes and forecasts the market for hydrazine hydrate at the global and regional level. The market has been forecast based on volume (Kilo Tons) and revenue (US$ Mn) from 2014 to 2022. The study includes drivers and restraints of the global hydrazine hydrate market. 

May, 2015 | 162 pages

This report analyzes and forecasts the market for chemical indicator inks at the global and regional level. The market has been forecast based on volume (Tons) and revenue (US$ Thousand) from 2014 to 2020. 

May, 2015 | 254 pages

This report covers the analysis and forecast of the Tall Oil Fatty Acid (TOFA) on a global and regional level. The study provides historic data of 2013 along with forecast for the period between 2014 and 2022 based on volume (kilo tons) and revenue (US$ Mn). 

May, 2015 | 117 pages

Tallow fatty acids are basic oleochemicals derived from animal fats. Different types of animal fats such as beef tallow, mutton tallow, and lard are used in the production of tallow fatty acids. Based on applications, tallow fatty acids are further processed for their specific end-markets. 

Apr, 2015 | 105 pages

Tartaric acid is a four-carbon organic acid, primarily used in wine production to impart the characteristic tart taste to the wine. Tartaric acid can be produced from natural sources as well as synthetic raw materials. Natural source for tartaric acid is lees, which is obtained after racking wine, usually in the summers.

Apr, 2015 | 98 pages

  Phenoxyethanol preservatives are a type of mono alkyl ethers, which are formed when ethylene oxide reacts with 2-Phenol. These are also obtained naturally from green tea. Phenoxyethanol preservatives possess an aromatic rose flavor with antibacterial property. 

Apr, 2015 | 67 pages

Calcium nitrate, a crystalline, odorless salt, has high moisture absorption and is commonly found as tetrahydrate. Calcium nitrate is produced by reaction of calcium carbonate and nitric acid lime stone is the commonly used source of carbonate. The compound is also produced as a byproduct during the production of calcium phosphate. 

Apr, 2015 | 134 pages

This report analyzes and forecasts the market for ethylene at a global and regional level. The market has been forecast based on volume (Mn Tons) and revenue (US$ Bn) from 2014 to 2020. The study includes drivers and restraints of the global ethylene market. 

Apr, 2015 | 87 pages

The report on the India welding consumables market provides a comprehensive explanation of the market through multiple analyses, measurements, and forecasts. Core figures of the India welding consumables market are provided in kilo tons for volume and INR mn for value and revenue.

Apr, 2015 | 102 pages

The report analyzes and forecasts the medical device coatings market on the global and regional level. The study provides historical data of 2013 along with forecast from 2014 to 2020 based on volume (Kilo Tons) and revenue (US$ Mn). 

Mar, 2015 | 78 pages

The growing demand for chemical products and chemical-based processes has transformed the global chemical market into a mammoth industry. From a valuation of nearly US$170 billion in the 1970s, the global chemical market has jumped to a valuation of nearly US$4 trillion by 2010.

Mar, 2015 | 143 pages

Superabsorbent polymers (SAP) have the ability to retain large amount of water and aqueous solutions. Superabsorbent polymers are primarily used in the medical industry, as these absorb high amount of exudates and liquids. This prevents infections and boosts the healing process of injuries. Superabsorbent polymers are used in the manufacture of various medical and surgical products made up of woven as well as nonwoven fabrics.

Mar, 2015 | 82 pages

The report also includes a detailed value chain analysis, which provides a comprehensive view of the market. Value chain analysis provides detailed information about value addition at each stage of the value chain. The report comprises driving and restraining factors for the coated paper market, along with their impact on demand during the forecast period.

Mar, 2015 | 98 pages

The report analyzes and forecasts the market for microcrystalline cellulose on the global and regional level. The market has been forecast based on volume (Tons) and revenue (US$ Thousand) from 2014 to 2020. The study includes drivers and restraints of the global microcrystalline cellulose market. It also covers the impact of these drivers and restraints on demand for microcrystalline cellulose during the forecast period.

Feb, 2015 | 80 pages

Foam blowing agents are additives used in the manufacture of foam that impart the characteristic foam-like structure. These agents are introduced in the substrate when they are in a liquid state through a high pressure injection. Foam blowing agents then expand in the substrate to provide a cellular matrix-like structure to the material.

Feb, 2015 | 92 pages

Demand for leather chemicals is primarily led by growth in the automotive, apparel, and footwear industries across the globe. Asia Pacific dominates the global market for leather chemicals. This report by Transparency Market Research analyzes, estimates, and forecasts the demand for leather chemicals on a global and regional level for a six-year period from 2014 to 2020.

Feb, 2015 | 74 pages

Polycarbonate, a thermoplastic polymer, is used widely in various applications as it offers properties such as high impact resistance, transparency, flame retardancy and high structural rigidity. Polycarbonate can be processed using extrusion and injection molding techniques to develop products with different properties and shapes.

Feb, 2015 | 103 pages

The report analyzes and forecasts the stearates market on the global and regional level. The study provides historical data of 2013 along with forecast between 2014 and 2020 based on volume (Kilo Tons) and revenue (US$ Mn). It includes drivers and restraints for the stearates market along with their impact on demand during the forecast period.

Feb, 2015 | 85 pages

Fatty acid esters are known as oleochemical substances which are natural substitutes to petroleum products. They are formed by a process known as esterfication. The key feedstock required in the production of fatty acid esters includes vegetable oils such as palm oil, sunflower oil and rapeseed oil among others.

Feb, 2015 | 106 pages

The report analyzes and forecasts the market for printing inks on the global and regional level. Market has been forecast based on volume (kilo tons) and revenue (US$ Mn) from 2014 to 2020. The study includes drivers and restraints of the global printing inks market. It also covers the impact of these drivers and restraints on demand for printing inks during the forecast period.

Feb, 2015 | 80 pages

The report analyzes and forecasts the textile chemicals market for technical textiles in Europe. The market has been forecast based on volume (kilo tons) and revenue (US$ Mn) from 2014 to 2020. The study includes drivers and restraints of the Europe textile chemicals market for technical textiles. It also covers the impact of these drivers and restraints on demand for textile chemicals for technical textiles during the forecast period. 

Jan, 2015 | 33 pages

Spirotetramat is a tetramic acid derivative with IUPAC name cis-4-(ethoxycarbonyloxy)-8-methoxy-3-(2,5-xylyl)-1-azaspiro[4.5]dec-3-en-2-one. It belongs to ketoenol group. Spirotetramat is sprayed on the leaves of the plant. It reaches all the parts of the plant including the roots and buds, through xylem and phloem present in the plant.

Jan, 2015 | 30 pages

Pinoxaden is a grass-weed herbicide, which inhibits the synthesis of membrane lipids. This results in desiccation of the target grass. Globally, it is used for against wheat and barley weeds such as Apera (bentgrass), Lolium (ryegrass), Alopecurus (blackgrass), Avena (wild oats), Phalaris (canary grass), Poa (meadowgrass) and Setaria (foxtails). 

Jan, 2015 | 80 pages

This report analyzes and forecasts the styrenic polymers market for medical applications on a global and regional level. The study provides historical data of 2013 along with forecast for the period from 2014 to 2020 based on volume (kilo tons) and revenue (US$ Mn).The study provides a decisive view of the styrenic polymers market for medical applications by segmenting it based on product type and regional demand.

Jan, 2015 | 37 pages

Penoxsulam is a new acetolactate synthase inhibitor herbicide for control of broadleaf weeds, annual grasses and sedges in agriculture industry. Penoxsulam is designed to control weeds in rice fields, cereal crops and lawns. Penoxsulam is not useful against most grass species and can be used to control a few specific grass species.

Jan, 2015 | 30 pages

Tembotrione is a selective postemergence herbicide used to control broadleaf and grass weeds in cornfields. The herbicide was launched in 2007 in two grades: technical grade (96.2%) and liquid product grade (34.5%). This study segments the global tembotrione market based on key regions and types of crops.

Jan, 2015 | 31 pages

Spirodiclofen is an acaricide/insecticide that belongs to the family of tetronic acids. The agrochemical affects the fat metabolism, and disturbs the energy balance of pests, thereby eventually eliminating them. Spirodiclofen is used in a wide range of fruit crops such as apple, almond, walnut, avocado, tangerine, orange, and peach. 

Jan, 2015 | 127 pages

Adhesive films are sheets, films and tapes of materials such as plastic, polymers, textiles and paper with a thin layer of adhesive in one or both surfaces. This helps them stick to the surfaces. Adhesive films essentially act as joints between two surfaces. These films are used in tapes, labels, graphic wraps, protective films, glazing, tinting, masking, insulating and specialty films, among others.

Dec, 2014 | 78 pages

The report analyzes and forecasts the flow chemistry market on a global and regional level. The study provides the historical data of 2013 along with forecast from 2014 to 2020 based on revenue (US$ Mn). The report includes drivers and restraints for the flow chemistry market along with their impact on demand during the forecast period.

Dec, 2014 | 67 pages

The report analyzes and forecasts the market for peracetic acid on the global and regional level. The market has been forecast based on volume (kilo tons) and revenue (US$ Mn) from 2014 to 2020. The study includes drivers and restraints of the global peracetic acid market. 

Dec, 2014 | 91 pages

Welding consumables account for a significant share of the welding industry compared to welding equipment and welding services. The welding consumables industry has been experiencing a shift from electrodes towards solid wires and flux-cored wires, due to higher production efficiency of the latter. Advantages such as high deposition rates are likely to boost demand for flux-cored wires, especially in Europe.

Dec, 2014 | 88 pages

UV adhesives are a type of radiation curable products that require UV radiation for curing and start bonding with their respective substrates. Radiation curable products such as the UV adhesives are a relatively new concept and niche in nature. UV adhesive products have certain advantages including low to zero volatile organic compounds (VOC) emissions, fast curing rates and good adhesion.

Dec, 2014 | 75 pages

The report provides analysis and forecast for the anti-reflective coatings market on a global and regional level. The study provides the historical data of 2013 along with forecast from 2014 to 2020 based on volume (Kilo Tons) and revenue (US$ Mn). It includes drivers and restraints for the anti-reflective coatings market along with their impact on demand during the forecast period. 

Dec, 2014 | 82 pages

Aniline is an aromatic amine. It is used as a precursor to several chemicals, which are employed in a wide range of industrial applications. A major portion of the aniline produced globally is utilized in the manufacture of methylene diphenyl diisocyanate (MDI). 

Nov, 2014 | 112 pages

Petrochemicals are an essential part of commodities used in daily lives. They are used in various end-use industries, ranging from manufacturing to consumer goods. Petrochemicals are chemical compounds derived from petroleum and other hydrocarbons, which are obtained from crude oil and natural gas.

Nov, 2014 | 83 pages

Photoresists are light-sensitive materials that are primarily used in fabrication and packaging of semiconductors, integrated circuits, flat panel displays and printed circuit boards. Photoresists play an important role in photolithography and photo-patterning process. Photoresists consist of resin or polymer, solvent and photo-sensitizer.

Nov, 2014 | 97 pages

Natural gas is a useful fuel as it burns cleanly and efficiently. It is used on a large-scale for domestic purposes. Production of natural gas has increased significantly due to technological advancements in extraction methods. Pyrrolidone is used widely to extract natural gas from crude oil. Demand for pyrrolidone is increasing due to rising demand for natural gas.

Oct, 2014 | 78 pages

Specialty pulp & paper chemicals are used in the manufacture of specialty paper. Specialty papers are papers not used in common printing and publishing shops, but instead for customized jobs. These papers are often used by companies for high value product packaging and filtration media. 

Oct, 2014 | 158 pages

The medical polymers market comprises resins and fibers, elastomers and biodegradable plastics that are used in various healthcare applications such as equipment and devices, packaging and tissue engineering. Polyvinyl chloride, polypropylene, polystyrene and polyethylene are the commonly used fibers and resins in the medical industry. 

Oct, 2014 | 108 pages

Industrial sludge is generated during the wastewater treatment process. Wastewater released by different industries contains a large amount of water, microorganisms, and chemical constituents. Sludge requires further treatment to reduce its volume and render it stable and safe for disposal. The main purpose of this treatment is to reduce the volume of water and pathogen content to facilitate safe disposal and possible use as fertilizer.  

Sep, 2014 | 77 pages

This report covers the forecast and analysis of the chitosan market on global and regional levels. The study provides historic data of 2013 along with the forecast from 2014 to 2020, based on both volume (Tons) and revenue (USD million). The study includes drivers and restraints of the chitosan market, along with their impact on demand and production during the forecast period.

Sep, 2014 | 85 pages

Printing toners are utilized in laser printers and are made up of colored micro-particles. These micro-particles can be utilized to make approximately 12 mn color variants within digital presses. The toners permit alterations in the digital image and the digital presses dry instantaneously due to their fusion by applying heat while the printing process is going on. The labeling industry and the folding carton printing industry have been the primary consumers of printing toners.

Sep, 2014 | 87 pages

The report provides analysis and forecast for the high-performance ceramic coatings market on a global and regional level. The study provides the historical data of 2013 along with forecast from 2014 to 2020 based on volume (Kilo Tons) and revenue (USD Million). 

Sep, 2014 | 92 pages

Sodium silicate, also known as water glass or liquid glass, is a colorless compound made from oxides of sodium and silica with varying ratios of SiO2 to Na2O, solids contents, and viscosity. Sodium silicate possesses excellent binding, adhesive, bleaching and sizing properties.

Sep, 2014 | 80 pages

Growth in the construction industry in BRICS countries coupled with rising government initiatives to boost the utilization of environment friendly products is expected to drive the global construction chemicals market between 2014 and 2020. Construction chemicals include asphalt additives, concrete admixtures, protective coatings, adhesives and sealants.

Sep, 2014 | 122 pages

The global welding products industry has been experiencing strong growth from various end-user industries, primarily from the building and construction industry. Other key end-user industries include electronics, mining and energy.

Sep, 2014 | 110 pages

The demand for concrete floor coatings is primarily led by growing awareness about floor coatings and increasing construction activities across the globe. North America dominates the global market for concrete floor coatings. 

Aug, 2014 | 70 pages

Demand for electronic chemicals is greatly dependent on factors such as the GDP growth of countries and therefore the high GDP in developing countries, particularly in the Asia Pacific region, has been the key factor fuelling the growth of the electronic chemicals market.

Aug, 2014 | 94 pages

Sodium acetate, also known as sodium ethanoate, can be synthesized by reacting acetic acid with sodium carbonate or sodium hydroxide. Sodium acetate trihydrate is a granular, crystalline powder with acetic odor, while sodium acetate anhydrous is a granular, hygroscopic powder.

Aug, 2014 | 84 pages

This report covers the forecast and analysis of the natural oil polyol market on global and regional levels. The study provides historic data of 2013 along with the forecast from 2014 to 2020, based on both volume (kilo tons) and revenue (USD million).

Aug, 2014 | 88 pages

The report covers forecast and analysis for the vinyl acetate monomer market on a global and regional level. The study provides the historical data of 2013 along with forecast for 2014 to 2020 based on volumes (Kilo Tons) and revenue (USD Million). The study includes drivers and restraints for the vinyl acetate monomer market along with their impact on demand during the forecast period.

Aug, 2014 | 73 pages

Monochloroacetic acid (MCA) is a halogenated derivative of acetic acid. It is used in the production of a variety of compounds and intermediates. MCA is majorly used in the production of carboxymethyl cellulose (CMC), thioglycolic acid (TGA) and agrochemicals. These derivatives of MCA are used widely in applications such as plastic stabilizers, pharmaceuticals, herbicides, food thickeners, surfactants and drilling fluids. 

Aug, 2014 | 58 pages

Increasing demand for nylon fibers from the carpets and textiles industry is expected to boost the growth of the adipic acid and caprolactam market. This, in turn, is anticipated to drive the muconic acid market. Muconic acid forms an intermediate in the production of adipic acid, caprolactam, terephthalic acid (TPA), etc. However, muconic acid is currently not preferred in the production of its derivatives on a large scale due to its low yield and subsequent high price.

Aug, 2014 | 88 pages

Demand for alcohol-based disinfectants is primarily ascribed to increasing awareness about hand hygiene globally and rising demand for disinfectants for hand sanitizing. North America dominates the global market for alcohol-based disinfectants. This report by Transparency Market Research analyzes, estimates and forecasts the alcohol-based disinfectants market on a global and regional level for a six year period from 2014 to 2020, both in terms of volume and revenue.

Aug, 2014 | 81 pages

Superabsorbent polymers (SAP) were first produced in the U.S. and Japan in 1970. These polymers were used in the manufacture of baby diapers and adult incontinence products due to their high water absorbing and retaining capacity. Superabsorbent polymers (SAP) help keep the skin dry, thereby preventing the spread of infections in diaper users. 

Jul, 2014 | 105 pages

The report analyzes and forecasts the market for dyestuff (black color) for textile fibers on the global and regional level. Demand has been forecast based on volumes (kilo tons) and revenue (USD million) from 2014 to 2020. The study includes drivers and restraints for the dyestuff (black color) market for textile fibers along with their impact on demand during the forecast period.

Jul, 2014 | 95 pages

The report analyzes and forecasts the market for dyestuff (black color) for nylon textile fibers on the global and regional level. Demand has been forecast based on volumes (tons) and revenue (USD million) from 2014 to 2020. The study includes drivers and restraints for the dyestuff (black color) market for nylon textile fibers along with their impact on demand during the forecast period. 

Jul, 2014 | 92 pages

Smart and interactive textiles are advanced fabric products incorporated with electronic components such as sensors for various applications such as health monitoring, heat management, actuation and response, and communication. Major end-users of smart and interactive textiles include transportation, military and defense, consumer applications such as sports and fitness, and medical.

Jul, 2014 | 130 pages

The report provides forecast and analysis of the micronutrients market on a global and regional level. The study provides historical data of 2013 along with forecast from 2014 to 2020 based on volumes (Kilo Tons) and revenue (USD Million). The report includes drivers and restraints for the micronutrients market along with their impact on demand during the forecast period. Additionally, the report comprises an analysis of opportunities available in the micronutrients market on the global and regional level. 

Jun, 2014 | 85 pages

Biofuels is a class of energy derived biologically from carbon fixation. In recent years, biofuels are gaining vital importance in the market due to factors such as, government support, low carbon emissions, volatility, energy sustainability, rising crude oil prices, and increase in automobile industry. The market has also witnessed a tremendous rise in demand for biofuels as they are naturally derived and can easily replace non-renewable resources.  

Jun, 2014 | 199 pages

This report analyzes, estimates and forecasts the Asia Pacific and Middle East demand for nonwoven materials and products in terms of volumes (kilo tons) and revenues (USD million) from 2012 to 2019. The report analyzes various factors driving and restraining the demand and the impact of these factors over the forecast period.

Jun, 2014 | 89 pages

This report covers forecast and analysis for the automotive wire and cable materials market on a global and regional level. The study provides historic data of 2012 along with forecast from 2013 to 2019 based on both volumes (kilo tons) and revenue (USD million). The study includes drivers and restraints for the automotive wire and cable materials market along with their impact on demand during the forecast period. 

Jun, 2014 | 69 pages

Catalyst regeneration entails the processing of spent catalysts in order to make them reusable. This is done by reinstating chemical properties of spent catalysts and thereby increasing their efficiency through a process called catalyst regeneration. The major advantage of catalyst regeneration is that it costs less than fresh catalysts.

Jun, 2014 | 74 pages

Microbial-derived surfactants or microbial biosurfactants are surface-active compounds produced by a variety of microbes from renewable feedstock. These surfactants replace their synthetic counterparts as they are derived from renewable feedstock with better quality or efficiency. Major microbial biosurfactants used in the industry include rhamnolipids, sophorolipids, surfactin and emulsan.

Jun, 2014 | 83 pages

The report covers forecast and analysis for the carboxymethyl cellulose market on a global and regional level. The study provides the historical data of 2012 along with forecast for 2013 to 2019 based on volumes (Kilo Tons) and revenue (USD Million). The study includes drivers and restraints for the carboxymethyl cellulose market along with their impact on demand during the forecast period.

May, 2014 | 79 pages

Potassium chloride is a metal halide salt composed of chlorine and potassium. It is also known as “Muriate of Potash”, a term which is primarily used in association with its use as a fertilizer. Potash is the most widely used potassium fertilizer and varies in color from red or pink to white depending upon the recovery and mining process used. Other uses of potassium chloride include pharmaceuticals, water treatment chemicals, animal feeds and consumer food products.

May, 2014 | 83 pages

Demand for food production has increased significantly due to rise in global population. This is one of the major drivers for growth in the agricultural biotechnology market. Furthermore, regulatory support in the Americas and Asia Pacific is expected to boost market growth in the next few years. Rising demand for biofuels is boosting the market.

May, 2014 | 73 pages

The global propionic acid market has been exhibiting steady growth in the last few years. Potential market opportunities in developing countries are likely to further boost the growth potential of the global propionic market during the forthcoming years. 

May, 2014 | 74 pages

Rising investments in offshore and onshore drilling activities is a key factor that is expected to stimulate the North America drilling fluids market in the near future. The market research report provides in-depth and high-level analysis of the regional market, focusing on the major product and application segments of drilling fluids. 

May, 2014 | 115 pages

Growing demand from water treatment application supported by increasing pressure from regulatory bodies for wastewater treatment is expected to fuel the global demand for water soluble polymers. Additionally increasing demand from petroleum applications attributed to rising shale oil drilling activities is expected to further fuel the demand for water soluble polymers. 

Apr, 2014 | 100 pages

The demand for mining chemicals is mainly prompted by decreasing ore grades globally and the growing stringent environment and legislative regulations on toxic discharge. Asia Pacific dominates the global market for mining chemicals. This report by Transparency Market Research analyses estimates and forecasts the mining chemicals demand on a global and regional level for a six year period from 2013 to 2019, both in terms of volume (kilo tons) and revenue (USD million).

Apr, 2014 | 102 pages

Growing construction and furniture industry coupled with increasing demand in China from industries such as automotive, textile, paper, secondary processed products, paints and coatings, among others is expected to drive the global melamine formaldehyde market from 2013 to 2019. For this research report, we conducted in-depth interviews and discussions with key industry participants and opinion leaders. Primary research represents bulk of our research efforts, supplemented by extensive secondary research. 

Apr, 2014 | 104 pages

Growing demand from fertigation application supported by increasing adoption of micro irrigation systems is expected to fuel the global demand for water soluble fertilizers. Additionally increasing demand for better yield owing to rising world population, decreasing arable land, and high demand of biofuels is expected to further fuel the demand for water soluble fertilizers. 

Apr, 2014 | 104 pages

Chelating agents are high performance chemical substances which are used to prevent the deleterious effects of metal ions by forming metal-ion complexes. They are used in a wide array of applications including household & industrial cleaning, pulp & paper, chemical processing and agrochemicals among others. APCAs, gluconates and organophosphonates are certain majorly used chelating agents across various industries.

Mar, 2014 | 52 pages

Increasing demand for polytrimethylene terephthalate (PTT) coupled with growing consumer awareness for bio-based products is expected to drive the global 1,3-propanediol market from 2013 to 2019. 1,3-propanediol (PDO) is a high value specialty chemical that is used in the  synthesis of polymers. such as polyurethanes, polyesters and polyethers.

Mar, 2014 | 80 pages

Generally, there are two main classes of naphtha - heavy naphtha and paraffinic naphtha. Paraffinic naphtha is rich in olefins and is suitable for polyolefin and olefin production.  Heavy naphtha is mainly used for production of aromatics. 

Mar, 2014 | 88 pages

Optical coatings are thin layers of film on optical devices to enhance their transmission, reflection and other optical properties. Typically, optical coatings contain multiple layers of various dielectric and metallic materials such as silicon dioxide, titanium dioxide, aluminum, etc. piled together depending on the end-user application.

Mar, 2014 | 108 pages

The demand for construction paints and coatings is mainly prompted by growing infrastructure activities globally and the growing demand for water borne paints and coatings. Asia Pacific dominates the global market for construction paints and coatings.Thisreport by Transparency Market Research analyses, estimates and forecasts the construction paints and coatings demand on a global and regional level for asix year period from 2013 to 2019, both in terms of volume and revenue. 

Feb, 2014 | 82 pages

The extensive application of radiation cured products across various industries has boosted the radiation cured products market. The report presents a detailed study of the market and forecasts the market growth and valuation during the period between 2013 and 2019. The report points out the key drivers and restraints affecting the growth of the market

Feb, 2014 | 81 pages

Growing demand from key end-use applications in glyphosate tolerant GM crops and conventional crops is expected to boost the global demand for glyphosate. The agriculture sector is witnessing rapid growth in Asia Pacific, Latin America and other regions, thus fuelling the demand for glyphosate. However, unfavorable factors such as emergence of glyphosate resistant weeds and stringent environmental regulations over use of agrochemicals, especially in Europe, are expected to hinder market growth. 

Feb, 2014 | 98 pages

The report covers forecast and analysis for the building & construction plasticsmarket on a global and regional level. The study provides historical data of 2012 along with a forecast from 2013 to 2019 based on both volumes (kilo tons) and revenue (USD million). The study includes drivers and restraints for the building & construction plasticsmarket along with the impact they have on the demand over the forecast period. 

Jan, 2014 | 76 pages

The report covers forecast and analysis for the methyl ethyl ketone (MEK) market on a global and regional level. The demand forecast is done based on volumes (kilo tons) and revenue (USD million) for the period ranging from 2013 to 2019. The study includes the drivers and restraints for the MEK market along with the impact they have on the demand over the forecast period. 

Dec, 2013 | 87 pages

This report links all sectors of the global amines market, labeling them in a categorized manner into appropriate segments using a premeditated pattern specifically chosen for it. The report offers exhaustive detail on all the market drivers as well as restraints, correlating them with the current and future feasible areas of growth.

Dec, 2013 | 107 pages

The report covers forecast and analysis for the fermentation chemicals market on a global and regional level. The demand forecast is done based on volumes (kilo tons) and revenue (USD million) for the period ranging from 2013 to 2019. The study includes the drivers and restraints for the fermentation chemicals market along with the impact they have on the demand over the forecast period. 

Dec, 2013 | 63 pages

Geotextiles are permeable fabrics which are used in foundation, rocks and soil to increase stability and decrease erosion caused due to wind and soil. They are generally made up of synthetic or natural fibers and can be woven, nonwoven or knitted, depending on the application for which they are used. 

Nov, 2013 | 64 pages

Bisphenol A is an organic, colorless solid that is soluble in organic solvent. It is usually employed in the manufacture of polycarbonate and epoxy resins. The demand for Bisphenol A is mainly triggered by growing demand from electrical and electronic and automotive industries. 

Oct, 2013 | 90 pages

Biocides, with their wide-ranging water treatment applications in industries as well as households, are expected to experience substantial growth in the future. The growing population and demand for treated water is expected to influence the biocide market. Other growing applications such as paints and coatings are also likely to fuel the growth of biocides market between 2012 and 2018. 

Oct, 2013 | 74 pages

Phthalate plasticizer was the largest application segment for the PA market and accounted for largest share of the global PA consumption in 2012. The other growing applications of PA include herbicides and insecticides, dyes and pigments, saccharin, detergents, polyester resin cross-linking agents and fire retardants. 

Oct, 2013 | 80 pages

Acetic acid (Ethanoic acid) belongs to the family of carboxylic acids and is a colorless liquid which possesses a distinctive pungent smell and sour taste. It is classified as a weak acid although its concentrated form is corrosive in nature.

Sep, 2013 | 63 pages

With the help of the latest market intelligence tools such as value chain analysis, Porter’s Five Forces analysis, SWOT analysis, and market attractiveness, the report highlights the drivers and challenges the maleic anhydride market faces, the major vendors and products contributing to its growth, business strategies and alliances adopted.

Sep, 2013 | 69 pages

Salicylic acid, a colorless crystalline substance, has been known to possess anti-inflammatory and pain-relieving properties and is largely well-known as an ingredient in the manufacturing of aspirin. While its benefits in the pharmaceutical industry for the healing of various skin ailments is common knowledge.

Sep, 2013 | 150 pages

The expanding automotive industry has triggered robust technology trends in the lubricants market. Lubricants ensure smoother mechanical performance by reducing friction between moving surfaces. There are three main types of lubricants available in the market. These are: mineral, synthetic, and biobased lubricants. Of these, synthetic and biobased lubricants are expected to demonstrate a steady growth in demand worldwide

Sep, 2013 | 94 pages

Propelled by the spurt in construction activities across developing economies in Asia Pacific, the solvents market is expected to prosper significantly in the coming years. The accelerated infrastructural and residential development, especially in emerging countries, has manifested into increasing demand for solvents. 

Sep, 2013 | 45 pages

Coated fabrics are specialized in nature and are used in many applications. Coated fabrics can be segmented into three product types namely polymer coated fabrics, rubber coated fabrics and fabric backed wall covering. The key advantage of coated fabrics is their elasticity, water resistance, and ability to drape.

Sep, 2013 | 126 pages

Stringent regulations by government and environment regulatory bodies are expected to primarily drive the global market of specialty fuel additives. Increasing consumption of biodiesel and ultra low sulfur diesel (ULSD) are projected to boost fuel additives demand especially cold flow improvers, lubricity improvers and cetane improvers.

Sep, 2013 | 95 pages

High production costs associated with petroleum based succinic acid is a key challenge for industry participants leading to enhanced focus on the development and commercialization of bio-based succinic acid. However, with the advent of bio-derived succinic acid, the cost of production is expected to decline which is expected to further fuel the demand for succinic acid globally.

Sep, 2013 | 137 pages

Corrosion inhibitors are made of various organic and inorganic chemicals such as molybdates, phosphonates, silicates and triazoles among others. Corrosion inhibitors form a layer over the metallic substrate and protect the metal from corrosion, thereby enhancing the life of the metal. The effectiveness of corrosion inhibitors depends on flow regime, quantity of liquid and fluid composition.

Aug, 2013 | 76 pages

Micro injection molding is majorly done using polymers such as thermoplastics, thermosets and some elastomers. Polymethylmethacrylate (PMMA) and Polyoxymethylene (POM) are some of the commonly used thermoplastics to develop several micro parts utilized by different end-use industries. Thermoplastic micro parts find huge application in mechanical parts, optical fibers, packaging, medicines, and other.

Aug, 2013 | 68 pages

Pentaerythritol finds its application in various industries such as automobiles, construction, paints, etc. The growing automobile and construction industry, especially in developing countries is expected to lead to a significant growth for pentaerythritol. In addition, a key growth driver for pentaerythritol will be its environmentally friendly property. 

Aug, 2013 | 71 pages

The glycolic acid market has witnessed substantial growth over the past few years owing to its increased adoption in personal care products. Glycolic acid has exfoliating and moisturizing properties which makes it an ideal ingredient in skin care and hair care products such as face creams, lotions, shampoos and conditioners.  

Aug, 2013 | 85 pages

High demand for steel manufacturing and steel processing along with recycling has been driving the market for silicon carbide (SiC) in the past few years. Silicon carbide is a key component of the semiconductor devices and growth in the electronics and semiconductor market is also a driving factor governing SiC market growth. 

Jul, 2013 | 69 pages

The global market for linear alkyl benzene (LAB) is witnessing steady growth on account of the rising demand for various types of cleansers across the world. The market is expected to maintain its pace owing to the increase in the demand for LAB from various end users. The easily biodegradable nature of LAB is the key factor behind this rising demand.

Jul, 2013 | 77 pages

The report analyses the acrylic acid market. For an insightful understanding, analysis and forecast have been provided for the time period ranging from 2012 to 2018. The forecasts are on the basis of volume (kilo tons) and revenue (USD million) for both global and regional level. 

Jul, 2013 | 108 pages

Excipients are inactive substances which are used as carriers for active ingredients of medications. These substances help in mainting the purity of active ingredients and prevent them from getting denatured. Excipients are used in applications in the medical, agriculture, food and cosmetics sectors. 

Jul, 2013 | 72 pages

Shift towards replacing petrochemical fibers with cellulose fibers from major end-use industries has been one of the major factors propelling the demand for cellulose fibers from the textile industry. The study includes a comprehensive view of the industry by segmenting and analyzing key applications of cellulose fibers, namely, spun yarn, fabrics, and clothing among others.

Jul, 2013 | 128 pages

The demand for polyurethane dispersions is mainly triggered by growing demand from the coatings and adhesive industry. In the coming years, the new regulations that limit the amount of volatile organic compounds (VOCs) allowed in paints, adhesives, coatings and other such products, is expected to provide potential opportunities for the market to flourish.

Jul, 2013 | 99 pages

This study covers the global non-halogenated flame retardant market for polymers. Flame retardants are used as additives in polymers to increase fire resistance in case of ignition or fire accidents. Owing to the high risk of fire accidents related with high usage of polymers in end-use industries such as construction, electrical and transportation, non-halogenated flame retardants are expected to have high demand in the near future. 

Jun, 2013 | 68 pages

Natural polymers that either occur naturally or are obtained from biomaterials such as cellulose, chitin, DNA, silk, and protein account for about 1% of the 300 million tons of plastics produced every year. Natural polymers are inclusive of copolymers that contain synthetic compounds, such as starch and fermentation products, vegetable gums, marine polymers, cellulose ethers.

Jun, 2013 | 115 pages

Innovations and product development, enhanced product properties such as strength and durability, growth and advancement of the global automotive industry are the major factors that have been driving the market for technical textiles. The major drawbacks faced by the market are higher cost of finished products affecting end user industry pricing characteristics and huge fragmentation of the existing market.

May, 2013 | 80 pages

Growing focus of the seed industry on crop protection is leading to development of different seed treatment methods. Seed treatment refers to application of chemical or biological active ingredients to the seeds, which is done before seed packaging. Seed treatment is an emerging method of crop protection, which protects the crops from different insect attacks and diseases. 

Apr, 2013 | 109 pages

Polyvinyl alcohol (PVA) films are manufactured from PVA resins along with vinyl acetate monomer (VAM) which is increasingly finding use in various water soluble applications such as detergents and agrochemical packaging. PVA films are also used for polarizer applications in LCD panels, sunglasses and optical filters.

Apr, 2013 | 120 pages

This market research report on solution styrene butadiene rubber (S-SBR) analyzes and estimates the global demand for S-SBR over a period of six years from 2012 to 2018, in terms of volume (kilo tons) and revenue (USD million).

Mar, 2013 | 73 pages

Glycerol is also known as glycerin when commercial material contains more than 95% of glycerol. Glycerol is a colorless polyol with a sweet taste and is highly soluble in water. Earlier glycerol was obtained as a by-product from the manufacturing of soaps or fatty acids by saponification of fats. These days it is mostly obtained as a by-product of biodiesel. Glycerol has wide industrial applications. Some of the areas of application include food industry, pharmaceuticals, personal care, storage, healthcare, etc. 

Mar, 2013 | 94 pages

Styrenic block copolymers (SBCs) are high-performance thermoplastic elastomers engineered to enhance the performance capabilities of a wide spectrum of end products and applications. SBCs are high performance materials with superior physical and chemical properties which make them suitable for use in various end use industries including the medical industry. 

Feb, 2013 | 104 pages

Acrylonitrile btadiene styrene (ABS) is a well established engineering thermoplastic which offers excellent properties such as chemical and impact resistance, superlative balance of heat and processing versatility.

Feb, 2013 | 107 pages

This report by Transparency Market Research analyzes the catalysts market for petroleum refineries, chemical synthesis, polymer and environmental applications on a global scale and aims to present a comprehensive collection of data and analyses of various market parameters. 

Feb, 2013 | 133 pages

Sorbitol is a sugar alcohol also known as glucitol or D- glucitol that is found in nature which gets metabolized slowly as compared to other dietary sugars. The rising diabetic and dietetic population, growing awareness in context to health concerns and better sugar alternatives are some of the primary driving forces boosting the market growth of sorbitol.

Feb, 2013 | 81 pages

This market research study analyzes the global market for Group IV & V lubricants, which are also referred to as “synthetic lubricants.” The market for these lubricants has been estimated from the demand point of view, while segmentation has been carried out on various levels including products (PAO, PAG, and esters), applications, as well as on geographical basis to provide a holistic picture of the market.

Jan, 2013 | 177 pages

Simply defined, a lubricant is a substance which reduced friction between two moving surfaces. This property is defined as lubricity. Critical properties that every lubricant must possess include high boiling point, low freezing point, high viscosity index, thermal stability, corrosion prevention, and high resistance to oxidation.

Jan, 2013 | 96 pages

This report by Transparency Market Research aims to evaluate competitiveness of the antimicrobial coatings market in a global scenario. The report segments the market on the basis of product types, applications and geography, estimating and forecasting market volumes and revenues for the period from 2012 to 2018. 

Jan, 2013 | 63 pages

This report segments, estimates and forecasts the MDI market in CIS (Commonwealth of Independent States) region along with its regional demand for Russia, Ukraine and other CIS nations. The report focuses on MDI consumption level along with the major drivers and restraints prevailing in the CIS market. The research report estimates and forecast the MDI consumption in CIS with respect to volumes (kilo tons) and revenues (USD million) from 2010 to 2018. The report also includes raw material and pricing analysis for MDI in the CIS region for better understanding of the market. This report also analyzes the value chain for MDI to understand the market from both the supply and the demand side. 

Dec, 2012 | 81 pages

The bio-based lubricants or bio-lubricants market is composed of biodegradable and non-toxic lubricants that are regarded as being more eco-friendly than synthetic lubricants. Just like their synthetic counterparts, biolubricants are used in a myriad of applications. The study on the global biolubricants market answers important questions faced by stakeholders in this industry.

Dec, 2012 | 117 pages

The report titled” Triethylene Glycol (TEG) Market – Global Industry Size, Market Share, Trends, Analysis and Forecast, 2012 – 2018” is an effort to determine the demand and supply of triethylene glycol (TEG) at global scenario. 

Dec, 2012 | 101 pages

The global in-line process viscometer (ILPV) by Transparency Market Research analyzes and evaluates demand for in-line process viscometers. This report provides detailed segmentation of ILPV market on the basis of major applications, types, technology and geography. Key applications covered in this report are chemicals, petroleum, pharmaceuticals and food & beverages. Demand for ILPV from each end application market is given in USD million. 

Nov, 2012 | 77 pages

The global market for biofuel enzymes is projected to reach USD 900 million by 2017. Some important reasons for the growth of this market are increase in biofuel production capacities and investment in new technology for addressing government quotas. Governments around the world are endorsing legislations for production of biofuels owing to the growing environmental concerns. Research is been made to develop new enzymes that would make production of biofuels more cost effective. Development in biofuel enzymes technology, particularly in production of cellulosic ethanol, is contributing greatly to the rapid growth of the biofuel industry.

Nov, 2012 | 81 pages

The role of Excipients in the drug delivery process has attained significance in recent times with the impetus of pharmaceutical companies on better and quick delivery of API’s. The developed countries such as U.S., European nations along with Japan have witnessed a steady growth in the Excipients market in the range of 5% - 7% by volume during the past few years. These countries consume about 75 – 80% of the total Excipients produce globally.

Oct, 2012 | 79 pages

This study turns the spotlight on the global oleochemicals market by analyzing key trends and projecting its growth trajectory over the next few years. The report on the oleochemicals market assumes importance in the backdrop of an increasing demand for these substances in industries such as personal care, soaps and detergents, lubricants, plastics, rubbers, coatings, and paper. 

Oct, 2012 | 72 pages

Coal bed methane is used as an alternative for natural gas in a number of consumer and industrial applications. Some of the prominent applications include heating homes, propelling vehicles, feedstock in industry, and for generating electricity. The most common technology used for production of coal bed methane is multistage hydraulic fracturing combined with horizontal drilling. Combination of these technologies is playing a key role in increasing the production of CBM in North America.

Oct, 2012 | 89 pages

This report covers the global market for butanediol (1,4 butanediol and 2,3 butanediol) along with its demand in regions including North America, Europe, Asia Pacific and Rest of the World (RoW). The report provides in-depth analysis for each application segment along with market estimates and forecast from 2010 to 2018 in terms of volumes and revenues. 

Sep, 2012 | 110 pages

The global water treatment chemicals and technology market has been exhibiting a steady growth since past few years. The increasing need for fresh water across the globe is significantly driving this market. The rapid depletion of fresh water reserves worldwide, is likely to fuel the demand for water treatment chemicals and technology in the coming years.

Sep, 2012 | 86 pages

Adipic acid is a crucial industrial chemical used in the production of nylon. It is the most widely used industrial dicarboxylic acid. It is virtually absent from the natural world and is produced on an industrial scale with the help of various processes. An overwhelming majority of the total volume of adipic acid produced worldwide – 85% – is used in the production of nylon.

Sep, 2012 | 105 pages

the year 2011 and is expected to cross $40,000 million in 2018, growing at a CAGR of over 6% from 2013 to 2018. Asia pacific and North America dominate the ethylene oxide market, accounting for over 60% of the total demand in 2011. However, strong growth is expected from Asia-Pacific, Eastern and Central Europe, Middle East and South America in the coming few years.

Aug, 2012 | 96 pages

Around the world, demand for food is rising as a result of the ever-expanding population. This in turn is fueling several market sectors in the agriculture industry. One such sector is that of crop protection chemicals, which consists of a variety of crop chemicals to increase agricultural yield. 

Jul, 2012 | 141 pages

The rising concerns about the use of petroleum-derived/synthetic surfactants is driving the global biosurfactants market. Synthetic surfactants can be damaging to the ecology and human health. The low degradability associated with synthetic surfactants is the primary force fueling the worldwide demand for biosurfactants. Biosurfactants offer low toxicity and high biodegradability.

Jul, 2012 | 82 pages

The global specialty surfactants market caters to several industries. These include personal care, food processing, home care, industrial and institutional cleaners, oilfield chemicals, emulsion polymerization, paints and coatings, construction, and textiles. The growth of these end-use industries is driving the global specialty surfactants market. 

May, 2012 | 51 pages

Global crop protection chemicals market continues to grow and discover new growth opportunities in emerging economies. However, market maturity attained by some of the most widely used crop protection chemicals.

Apr, 2012 | 56 pages

The ongoing uproar over the hazardous effects of pesticides may have had an adverse impact on the demand. However, players within the pesticides market are turning this into an opportunity by shifting toward more natural alternatives like bio-pesticides.

Apr, 2012 | 122 pages

Polyurethanes (PU), due to their chemical structure, are suitable to be molded into unusual shapes and enhance the quality of several consumer and industrial products. To maintain temperature uniformity and noise levels, polyurethanes are the preferred choice of builders as insulation material in homes and commercial properties.

Mar, 2012 | 49 pages

MDI is mostly used to manufacture rigid polyurethane foams which are widely used as insulators in construction, consumer appliances, industrial applications, packaging and other applications. It is also used in non-foam applications such as Elastomers, paints & coating, and adhesives & sealants.