BIO-BASED AND GREEN CHEMICALS TO HELP SUSTAIN IN THE LONG RUN
Total Reports: 1279
Hydrotreated Vegetable Oil (HVO) is a renewable diesel fuel produced through the hydrogenation and hydrocracking of various vegetable oils, fats, and triglycerides. It can be derived from feedstocks such as rapeseed oil, tall oil, animal fats, and waste cooking oil. HVO is also known as hydro-processed esters and fatty acids
Rep Id : TMRGL80006 | Published | Chemicals And Materials | June 2023
The electronics industry is transforming consistently, which is boosting the need for relevant material. New, advanced materials are being developed to address issues such as energy efficiency and smaller component sizes. A recent crop of materials, for instance, offers increased energy efficiency and reduced environmental effect.
Rep Id : TMRGL85652 | Published | Chemicals And Materials | June 2023
Carbon concrete, also known as carbon fiber-reinforced concrete, is an innovative construction material that combines the benefits of both concrete and carbon fiber reinforcement. It involves embedding carbon fiber elements, typically in the form of grids or sheets, into the concrete matrix, thus enhancing its structural performance and durability.
Rep Id : TMRGL84634 | Published | Chemicals And Materials | June 2023
Logs refer to pieces of timber or tree trunks that have been cut down and are typically used for various purposes, such as construction, fuel, or woodworking. Logs are often transported to sawmills, where they can be further processed into lumber or other wood products. Logs may be sawn into
Rep Id : TMRGL85647 | Published | Chemicals And Materials | June 2023
Supramolecular polymers are produced through reversible, non-covalent interactions between monomer units. These polymers depend on weak and reversible interactions, such as hydrogen bonding, stacking, metal coordination, and host-guest interactions, as opposed to conventional covalent polymers, where the monomers are united by strong chemical bonds.
Rep Id : TMRGL85646 | Published | Chemicals And Materials | June 2023
In 1974, a group of researchers headed by Albert Ghiorso at the Lawrence Berkeley Laboratory in Berkeley, California, U.S., first created seaborgium, whose most stable isotope is seaborgium-271. The Super-Heavy Ion Linear Accelerator was used by researchers to ionize oxygen-18 and bombard californium-249 atoms. As a consequence of this collision,
Rep Id : TMRGL85645 | Published | Chemicals And Materials | June 2023
9-decanoic acid methyl ester, also known as methyl 9-decenoate, is a chemical compound derived from the esterification of decanoic acid and methanol. It falls under the category of fatty acid methyl esters and is employed in various industries.
Rep Id : TMRGL83287 | Published | Chemicals And Materials | June 2023
Textile pretreatment chemicals are a group of chemicals that are used in the textile sector to prepare fabrics for subsequent processing steps such as dyeing, printing, and finishing. The textile pretreatment process can help eliminate sizing agents, oils, wax, seed hulls, soils, pectin, and other impurities, while improving the whiteness
Rep Id : TMRGL85641 | Published | Chemicals And Materials | June 2023
Hydrogen is considered the most important energy carrier for the future, as it complements electrification in several sectors. It is difficult to predict which type of hydrogen will witness high traction, as the market for hydrogen is still at a very early stage of development.
Rep Id : TMRGL85638 | Published | Chemicals And Materials | June 2023
The global market for synthetic mentha oil revolves around the production and distribution of artificially created mentha oil. Mentha oil, derived from the leaves of the mentha plant, is widely used in various industries for its distinct aroma and flavor.
Rep Id : TMRGL85635 | Published | Chemicals And Materials | June 2023
Sodium methyl cocoyl taurate is a surfactant that is used primarily as a cleansing and foaming agent in personal care products due to its mild and moisturizing properties. It is derived from coconut and a salt of coconut fatty acid amide of N-methyltaurine.
Rep Id : TMRGL78143 | Published | Chemicals And Materials | May 2023
Sodium borohydride is a white crystalline solid that is highly soluble in water. It is primarily used for the reduction of various functional groups, such as carbonyl compounds (aldehydes and ketones) and imines, to their corresponding alcohols and amines, respectively.
Rep Id : TMRGL16685 | Published | Chemicals And Materials | May 2023
Meitnerium, a synthetic chemical element, was first synthesized in 1982 by a team of German scientists at the Institute for Heavy Ion Research (Gesellschaft für Schwerionenforschung) in Darmstadt.
Rep Id : TMRGL85630 | Published | Chemicals And Materials | May 2023
Water plays a critical role in agricultural production. However, water shortages and droughts have caused soil desertification and salinization, which also challenge the sustainable development of agriculture as well as food security. Therefore, improvement in utilization efficiency of water is of utmost importance in agriculture.
Rep Id : TMRGL85629 | Published | Chemicals And Materials | May 2023
Metal scavenging agents are employed in various industries to remove unwanted metals from process solutions. They play an important role in maintaining product quality, preventing equipment corrosion, and meeting regulatory standards.
Rep Id : TMRGL61299 | Published | Chemicals And Materials | May 2023
Refinery process chemicals are widely employed in crude oil refineries. These chemicals include corrosion inhibitors, H2S scavengers, scale inhibitors, demulsifiers, antifouling agents, coagulants and flocculants, biocides, antifoams and defoamers, disinfectants, and catalysts.
Rep Id : TMRGL78303 | Published | Chemicals And Materials | May 2023
Pelletized activated carbon offers several benefits. It has a large surface area with a network of pores that provides high adsorption capacity. It also effectively adsorbs and removes a wide range of impurities, contaminants, and pollutants from gases, liquids, and solutions. Therefore, it is a preferred choice for usage in
Rep Id : TMRGL77595 | Published | Chemicals And Materials | May 2023
Rotomolding, also known as rotational molding, is a manufacturing process used to produce hollow plastic parts and products. It is a specialized technique that involves the usage of a rotating mold, typically made of metal, which is heated and filled with powdered plastic material.
Rep Id : TMRGL69095 | Published | Chemicals And Materials | May 2023
Surfactants, also known as surface-active agents, are compounds that play a crucial role in various industries and everyday products. They possess unique properties that allow them to reduce the surface tension between different substances such as liquids or the tension between a liquid and solid surface. By doing so, surfactants
Rep Id : TMRGL1500 | Published | Chemicals And Materials | May 2023
Faux finish coatings, also called decorative finishing or faux painting, are techniques used to create the appearance of different materials or textures on surfaces. They are applied on walls, furniture, or objects to mimic the look of materials, including wood, marble, stone, or fabric. Faux finish coatings enhance the appearance
Rep Id : TMRGL76882 | Published | Chemicals And Materials | May 2023
Most comprehensive coverage 100+ countries, 2 million+ data points
Personalized pre-sales, on-boarding, and post-sales support
Less assumption, more science a research methodology perfected through years of rigorous diligence
True to its name, transparency in every minute details from research processes to financials
20% of Fortune 500 are our clients have worked with over 3000 SMEs