We use cookies for a better user experience. Read our Privacy Policy
I Agree
IOT IN ELECTRONICS AND SEMICONDUCTORS TO SET PACE FOR INNOVATIONS
Total Reports: 517
The PON is a fiber-optic network that uses optical splitters and point-to-multipoint topology to send data from a single transmission point to multiple user endpoints. PON equipment consists of various components, including optical line terminals (OLTs), optical network units (ONUs), splitters, and optical distribution networks (ODNs).
Rep Id : TMRGL2024 | Published | Electronics and Semiconductors | June 2023
A micro switch is a small, lightweight, and highly sensitive device which requires very less compression to activate. Micro switches are cost effective and have very long shelf life. These switches are commonly used in safety devices owing to their sensitivity and reliability.
Rep Id : TMRGL15551 | Published | Electronics and Semiconductors | May 2023
Chip metal oxide varistors (MOV) are electronic components that provide surge protection by suppressing and diverting excessive voltage transients. Chip MOVs are typically made of metal oxide materials, such as zinc oxide, combined with other metal oxide additives. This composition gives them their nonlinear voltage-current characteristics, enabling them to exhibit
Rep Id : TMRGL85624 | Published | Electronics and Semiconductors | May 2023
GaAs photodiode is a semiconductor device made from gallium arsenide (GaAs) material, which is designed to convert incoming light energy into electrical current. Its operation is based on the principle of photovoltaic effect, where photons (light particles) generate electron-hole pairs within the semiconductor material. They offer advantages such as high
Rep Id : TMRGL74423 | Published | Electronics and Semiconductors | May 2023
Power semiconductor devices are extensively used for the management and control of electrical energy. The improved performance of power devices has resulted in cost savings and increased efficiency, leading to reduced use of fossil fuels and less environmental damage. Usage of SiC power semiconductors is anticipated to rise exponentially due
Rep Id : TMRGL22034 | Published | Electronics and Semiconductors | May 2023
Nowadays, most semiconductor chips are manufactured from silicon that has been plated with materials such as gold, copper, and silver in order to assure the quality of finished products. The usage of semiconductor components is increasing in automobiles and connected devices. Semiconductor plating can directly affect the performance of semiconductor
Rep Id : TMRGL85616 | Published | Electronics and Semiconductors | May 2023
Piezoelectric actuators are devices that can transform electrical energy into mechanical displacement or stress by exploiting the piezoelectric effect. These actuators have gained widespread popularity in high-precision positioning mechanisms due to their ability to achieve small mechanical displacements at a rapid rate.
Rep Id : TMRGL71487 | Published | Electronics and Semiconductors | May 2023
Gyrocopter, often referred to as "gyroplane" or "autogyro," is a type of rotorcraft that uses an unpowered rotor to provide lift and a powered propeller for propulsion. It is different from a helicopter, as the rotor is not powered by an engine, but rotates freely due to the airflow through
Rep Id : TMRGL56613 | Published | Electronics and Semiconductors | May 2023
An articulated robot is a type of industrial robot that consists of multiple interconnected joints, mimicking the structure and movement of a human arm. These robots are designed to perform complex and precise tasks in manufacturing and assembly processes. The joints of an articulated arm robot provide flexibility and enable
Rep Id : TMRGL46560 | Published | Electronics and Semiconductors | May 2023
Etching, one of the crucial steps in the manufacture of semiconductors, helps remove materials from the semiconductor surface. It uses liquid chemicals, reaction gases, or ion chemical reactions to mold thin coating into desired designs. Etching equipment is widely employed in the production lines of semiconductors and other electronic devices.
Rep Id : TMRGL85610 | Published | Electronics and Semiconductors | May 2023
Linear motor is an electric motor that generates motion in a straight line rather than rotationally. It uses a magnetic field to produce force and motion along a linear path. Labor shortages are becoming prevalent across the globe. Therefore, many companies are turning toward automation to compensate and streamline their
Rep Id : TMRGL52422 | Published | Electronics and Semiconductors | May 2023
Fuel cell UAV, or unmanned aerial vehicle, is an aircraft that is powered by a fuel cell instead of a traditional combustion engine. Fuel cell generates electricity through a chemical reaction between hydrogen and oxygen, producing water vapor as a by-product. This process is much cleaner and more efficient than
Rep Id : TMRGL85600 | Published | Electronics and Semiconductors | May 2023
Wafer handling robot is a type of robotic system created to simplify and automate the manipulation of silicon wafers during the semiconductor manufacturing process. These robots are integrated with various semiconductor process tools and are specifically designed for handling semiconductor wafers in the production of microelectronics.
Rep Id : TMRGL57228 | Published | Electronics and Semiconductors | May 2023
Active optical cables (AOC) contain optoelectronic modules that convert electrical signals into light in connector heads. AOC involves additional signal conversions vis-à-vis passive copper cables, which send electronic signals directly down the internal copper wire. Electrical input is converted to photons in an active optical cable by a combination of
Rep Id : TMRGL2355 | Published | Electronics and Semiconductors | May 2023
High altitude pseudo satellites (HAPS) are unmanned aerial vehicles (UAVs) that operate at high altitudes in the Earth's atmosphere, typically above 20 kilometers. They are also known as high altitude long endurance (HALE) aircraft, as they can fly for extended periods of time, up to several months, without the need
Rep Id : TMRGL85592 | Published | Electronics and Semiconductors | May 2023
A time of flight (ToF) sensor measures the distance between the sensor and an object by calculating the time it takes for a light or sound signal to travel to the object and back to the sensor. These sensors typically use infrared light or laser light to measure distance and
Rep Id : TMRGL54498 | Published | Electronics and Semiconductors | April 2023
Ferroelectric RAM is a stand-alone non-volatile memory that instantly captures and preserves crucial data when power is interrupted. Ferroelectric non-volatile memory is best suited for mission-critical data-logging applications such as high-performance programmable logic controllers (PLCs) and life-enhancing patient monitoring systems.
Rep Id : TMRGL12194 | Published | Electronics and Semiconductors | April 2023
Flexible technologies are employed to produce thin and highly flexible perceptive systems that can be folded or rolled without altering their functionality. Printed and flexible sensor is an innovative technology to manufacture sensors based on conductive inks and functional materials. These sensors deliver data into the cloud and are a
Rep Id : TMRGL270 | Published | Electronics and Semiconductors | April 2023
Optoelectronic sensors, also called photodetectors or photodiodes, produce an electrical signal that is proportional to the amount of light incident on their active area. These sensors are used in various applications, from telecommunications and medical devices to automotive safety systems.
Rep Id : TMRGL80025 | Published | Electronics and Semiconductors | April 2023
3D camera is a device that captures images or videos with depth information, allowing the creation of 3D models or images. It uses various techniques such as stereo vision, time-of-flight, structured light, or active triangulation to calculate the distance of objects from the camera and create a 3D representation of
Rep Id : TMRGL10664 | Published | Electronics and Semiconductors | April 2023
Most comprehensive coverage 100+ countries, 2 million+ data points
Personalized pre-sales, on-boarding, and post-sales support
Less assumption, more science a research methodology perfected through years of rigorous diligence
True to its name, transparency in every minute details from research processes to financials
20% of Fortune 500 are our clients have worked with over 3000 SMEs
Copyright © Transparency Market Research, Inc. All Rights reserved
Trust Online
