Vibration Welding Technology Market: Introduction

Vibration Welding was developed by Sonobond Ultrasonics, an American company in 1960. Vibration welding, also referred to as linear vibration welding, is a process where the surfaces that are to be joined with each other are rubbed against one another in an oscillatory mode under pressure. This causes very high friction between the surfaces which results in generation of tremendous heat between them. This heat causes the melting of the interfacial material and the molten film is allowed to cool down under pressure. This completes the vibration welding process. It is also called as linear friction welding. Weld frequency, weld pressure, vibratory motion and its amplitude and weld timing are the important parameters involved in the process.  Generally, the machines operate at a pre-determined fixed weld frequencies (120 Hz and 240 Hz) with amplitude of vibration being 5mm and weld time of 10 seconds (which could vary, generally from 1 – 10 seconds). This technology is used in the automotive industry where it is used in welding of taillights, head lights and other assemblies; it is also used in the appliance industry and the aerospace industry.

Vibration Welding Technology Market: Growth Fuelling Aspects

Vibration welding can be used on almost all thermoplastic materials. As compared to ultrasonic welding, it can handle medium and large sized pieces (example: automobile bumpers). They can weld with higher moisture content than the ultrasonic welding. Surface contaminants do not affect the weld when done by vibration welding process. Moreover, the area which melts between the two pieces is not exposed to air which eliminates the occurrence of thermo-oxidative degeneration, this being a critical aspect. Other benefits impacting the growth of the vibration welding technology market are fast cycle time, ability to weld bigger parts, less power consumption, no fumes or harmful emissions, higher strength, easy automation is possible, capability to weld different and dissimilar materials, ideally used to weld PA materials, compatible with thermoplastics, welding of several parts per cycle is possible, low costs involved and low maintenance needed. Since no outside component is involved in the process, the weld interface is the same as the materials being involved in the process of vibration welding. This eliminates the chances of quality degradation. It also does not cause any degradation of material due to heat generated as the process is easier to control.

Vibration Welding Technology Market: Growth Challenges

Along with the plusses there are certain limitations that hinder the growth of the vibration welding technology market. The main limitation of the technology is that it can be used on material which are nearly flat. This technology is not applicable in case of low modulus thermoplastics (thermoplastic elastomers). Moreover, if the parameters such as weld time, pressure, amplitude and weld frequency are not controlled, this could result in uneven, irregular or poor quality welding. These are the challenges that lie in the growth path of the market.

Vibration Welding Technology Market: Companies

The companies that deal with vibration welding technology are Emerson, Forward Technology (a Crest Group company), Dukane, Bonal Technologies Inc. and NTF Pvt. Ltd.

The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.

The study is a source of reliable data on:

  • Market segments and sub-segments
  • Market trends and dynamics
  • Supply and demand
  • Market size
  • Current trends/opportunities/challenges
  • Competitive landscape
  • Technological breakthroughs
  • Value chain and stakeholder analysis

The regional analysis covers:

  • North America (U.S. and Canada)
  • Latin America (Mexico, Brazil, Peru, Chile, and others)
  • Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
  • Eastern Europe (Poland and Russia)
  • Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
  • Middle East and Africa (GCC, Southern Africa, and North Africa)

The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.

A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.

Highlights of the report:

  • A complete backdrop analysis, which includes an assessment of the parent market
  • Important changes in market dynamics
  • Market segmentation up to the second or third level
  • Historical, current, and projected size of the market from the standpoint of both value and volume
  • Reporting and evaluation of recent industry developments
  • Market shares and strategies of key players
  • Emerging niche segments and regional markets
  • An objective assessment of the trajectory of the market
  • Recommendations to companies for strengthening their foothold in the market

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

This study by TMR is all-encompassing framework of the dynamics of the market. It mainly comprises critical assessment of consumers' or customers' journeys, current and emerging avenues, and strategic framework to enable CXOs take effective decisions.

Our key underpinning is the 4-Quadrant Framework EIRS that offers detailed visualization of four elements:

  • Customer Experience Maps
  • Insights and Tools based on data-driven research
  • Actionable Results to meet all the business priorities
  • Strategic Frameworks to boost the growth journey

The study strives to evaluate the current and future growth prospects, untapped avenues, factors shaping their revenue potential, and demand and consumption patterns in the global market by breaking it into region-wise assessment.

The following regional segments are covered comprehensively:

  • North America
  • Asia Pacific
  • Europe
  • Latin America
  • The Middle East and Africa

The EIRS quadrant framework in the report sums up our wide spectrum of data-driven research and advisory for CXOs to help them make better decisions for their businesses and stay as leaders.

Below is a snapshot of these quadrants.

1. Customer Experience Map

The study offers an in-depth assessment of various customers’ journeys pertinent to the market and its segments. It offers various customer impressions about the products and service use. The analysis takes a closer look at their pain points and fears across various customer touchpoints. The consultation and business intelligence solutions will help interested stakeholders, including CXOs, define customer experience maps tailored to their needs. This will help them aim at boosting customer engagement with their brands.

2. Insights and Tools

The various insights in the study are based on elaborate cycles of primary and secondary research the analysts engage with during the course of research. The analysts and expert advisors at TMR adopt industry-wide, quantitative customer insights tools and market projection methodologies to arrive at results, which makes them reliable. The study not just offers estimations and projections, but also an uncluttered evaluation of these figures on the market dynamics. These insights merge data-driven research framework with qualitative consultations for business owners, CXOs, policy makers, and investors. The insights will also help their customers overcome their fears.

3. Actionable Results

The findings presented in this study by TMR are an indispensable guide for meeting all business priorities, including mission-critical ones. The results when implemented have shown tangible benefits to business stakeholders and industry entities to boost their performance. The results are tailored to fit the individual strategic framework. The study also illustrates some of the recent case studies on solving various problems by companies they faced in their consolidation journey.

4. Strategic Frameworks

The study equips businesses and anyone interested in the market to frame broad strategic frameworks. This has become more important than ever, given the current uncertainty due to COVID-19. The study deliberates on consultations to overcome various such past disruptions and foresees new ones to boost the preparedness. The frameworks help businesses plan their strategic alignments for recovery from such disruptive trends. Further, analysts at TMR helps you break down the complex scenario and bring resiliency in uncertain times.

The report sheds light on various aspects and answers pertinent questions on the market. Some of the important ones are:

1. What can be the best investment choices for venturing into new product and service lines?

2. What value propositions should businesses aim at while making new research and development funding?

3. Which regulations will be most helpful for stakeholders to boost their supply chain network?

4. Which regions might see the demand maturing in certain segments in near future?

5. What are the some of the best cost optimization strategies with vendors that some well-entrenched players have gained success with?

6. Which are the key perspectives that the C-suite are leveraging to move businesses to new growth trajectory?

7. Which government regulations might challenge the status of key regional markets?

8. How will the emerging political and economic scenario affect opportunities in key growth areas?

9. What are some of the value-grab opportunities in various segments?

10. What will be the barrier to entry for new players in the market?

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

Custom Market Research Services

TMR offers custom market research services that help clients to get information on their business scenario required where syndicated solutions are not enough.

REQUEST CUSTOMIZATION

Vibration Welding Technology Market

Pre Book