Get In Touch

Radiation tolerant is the property of making a device or system resistant to damage and make a device to tolerate high-energy electromagnetic radiation till the certain limit. The radiation tolerant motor drive provides flexible I/O that allow designs to be used in various applications, and standard logic level inputs to enable design implementation. Also, provides bridge driver coupled with floating current sense for the motor coil, resolver to the digital interface, and bi-level inputs for sensing rotary encoders. It supports motor driver functions along with coil current feedback, and linear position sensing. The features of radiation tolerant motor drive include differential current sensors, sigma delta resolver transformer driver, sense inputs, fault detection, radiation tolerant. Moreover, the motor drive is used for various applications such as servo control, linear actuator servo control, and stepper motor driver. 

Radiation Tolerant Motor Drive Market: Drivers and Restraints

Radiation tolerant motor drive market is witnessing maximum growth owing to an innovative advance circuit, logic protection with high efficiency to the motor, eliminate shoot-through conditions, and constant output performance. Moreover, it is used for servo-amplifiers & speed controls in various applications, reduces the weight & board area in space satellites, high reliability, provides advanced circuits and logic protection to ensure the fail-safe operation, aids in power management, data converter, interface and high system efficiency are some of the factors that can boost the demand for radiation tolerant motor drive over the forecast period. However, motion control in radioactive environments is a challenge for the design engineer, and the high cost of design & development of radiation tolerant components which may hamper the growth of radiation tolerant motor drive market in near future. 

Radiation Tolerant Motor Drive Market: Segmentation

The radiation tolerant motor drive market has been classified on the basis of components, manufacturing technique and application.

Based on components, the radiation tolerant motor drive market is segmented into the following:

  • Power Management
  • FPGA
  • Memories
  • Logic
  • ASICs

Based on manufacturing technique, the radiation tolerant motor drive market is segmented into the following:

  • Radiation Tolerant by Design
  • Radiation Tolerant by process

Based on application, the radiation tolerant motor drive market is segmented into the following:

  • Space
  • Aerospace & Military
  • Nuclear Power Plant 

Radiation Tolerant Motor Drive Market: Overview

Radiation tolerant motor drive market revenue is expected to grow at a rapid growth rate, over the forecast period. The market is anticipated to perform well in the near future owing to increase in requirement for radiation immunity & high-performance signal processing devices for satellite and spacecraft electronic systems, and rising advanced technology for more capability for civilian and government applications. Moreover, expanding demand for power management devices, radiation tolerant MOSFETs, and transistors in space applications are some of the factors that can accelerate the market revenue growth of radiation tolerant motor drive during the forecast period. Based on applications, space is anticipated to grow at the fastest CAGR over the forecast period attributed to rising use of satellites for geographic images as well as missile targets. 

Radiation Tolerant Motor Drive Market: Region-wise Outlook

Depending on the geographic region, radiation tolerant motor drive market is divided into seven key regions: North America, Eastern Europe, Latin America, Western Europe, Japan, Asia-Pacific, and the Middle East & Africa. North America dominates the radiation tolerant motor drive market followed by Europe, and Japan owing to advance technology, presence of established key players, high demand for communication satellites, advanced multicore processor technology, and research & development facilities in these regions. Asia Pacific, Middle East, and Africa hold huge potential and shows substantial growth in terms of rising commercial markets for space electronic devices, coupled with expanding government budget for defense, and growing demand for space systems which can survive in variety of high radiation environments for long time period are some of the factors which strengthen the growth of radiation tolerant motor drive market throughout the forecast period. 

Radiation Tolerant Motor Drive Market: Key Players

Some players of radiation tolerant motor drive market are Data Device Corporation, Microsemi Corporation, BEI Kimco, Atmel Corporation, Texas Instruments Incorporated, BAE Systems, Xilinx, Inc., STMicroelectronics NV and Linear Technology Corporation.

The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.

The study is a source of reliable data on:

  • Market segments and sub-segments
  • Market trends and dynamics
  • Supply and demand
  • Market size
  • Current trends/opportunities/challenges
  • Competitive landscape
  • Technological breakthroughs
  • Value chain and stakeholder analysis

The regional analysis covers:

  • North America (U.S. and Canada)
  • Latin America (Mexico, Brazil, Peru, Chile, and others)
  • Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
  • Eastern Europe (Poland and Russia)
  • Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
  • Middle East and Africa (GCC, Southern Africa, and North Africa)

The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.

A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.

Highlights of the report:

  • A complete backdrop analysis, which includes an assessment of the parent market
  • Important changes in market dynamics
  • Market segmentation up to the second or third level
  • Historical, current, and projected size of the market from the standpoint of both value and volume
  • Reporting and evaluation of recent industry developments
  • Market shares and strategies of key players
  • Emerging niche segments and regional markets
  • An objective assessment of the trajectory of the market
  • Recommendations to companies for strengthening their foothold in the market   

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

This study by TMR is all-encompassing framework of the dynamics of the market. It mainly comprises critical assessment of consumers' or customers' journeys, current and emerging avenues, and strategic framework to enable CXOs take effective decisions.

Our key underpinning is the 4-Quadrant Framework EIRS that offers detailed visualization of four elements:

  • Customer Experience Maps
  • Insights and Tools based on data-driven research
  • Actionable Results to meet all the business priorities
  • Strategic Frameworks to boost the growth journey

The study strives to evaluate the current and future growth prospects, untapped avenues, factors shaping their revenue potential, and demand and consumption patterns in the global market by breaking it into region-wise assessment.

The following regional segments are covered comprehensively:

  • North America
  • Asia Pacific
  • Europe
  • Latin America
  • The Middle East and Africa

The EIRS quadrant framework in the report sums up our wide spectrum of data-driven research and advisory for CXOs to help them make better decisions for their businesses and stay as leaders.

Below is a snapshot of these quadrants.

1. Customer Experience Map

The study offers an in-depth assessment of various customers’ journeys pertinent to the market and its segments. It offers various customer impressions about the products and service use. The analysis takes a closer look at their pain points and fears across various customer touchpoints. The consultation and business intelligence solutions will help interested stakeholders, including CXOs, define customer experience maps tailored to their needs. This will help them aim at boosting customer engagement with their brands.

2. Insights and Tools

The various insights in the study are based on elaborate cycles of primary and secondary research the analysts engage with during the course of research. The analysts and expert advisors at TMR adopt industry-wide, quantitative customer insights tools and market projection methodologies to arrive at results, which makes them reliable. The study not just offers estimations and projections, but also an uncluttered evaluation of these figures on the market dynamics. These insights merge data-driven research framework with qualitative consultations for business owners, CXOs, policy makers, and investors. The insights will also help their customers overcome their fears.

3. Actionable Results

The findings presented in this study by TMR are an indispensable guide for meeting all business priorities, including mission-critical ones. The results when implemented have shown tangible benefits to business stakeholders and industry entities to boost their performance. The results are tailored to fit the individual strategic framework. The study also illustrates some of the recent case studies on solving various problems by companies they faced in their consolidation journey.

4. Strategic Frameworks

The study equips businesses and anyone interested in the market to frame broad strategic frameworks. This has become more important than ever, given the current uncertainty due to COVID-19. The study deliberates on consultations to overcome various such past disruptions and foresees new ones to boost the preparedness. The frameworks help businesses plan their strategic alignments for recovery from such disruptive trends. Further, analysts at TMR helps you break down the complex scenario and bring resiliency in uncertain times.

The report sheds light on various aspects and answers pertinent questions on the market. Some of the important ones are:

1. What can be the best investment choices for venturing into new product and service lines?

2. What value propositions should businesses aim at while making new research and development funding?

3. Which regulations will be most helpful for stakeholders to boost their supply chain network?

4. Which regions might see the demand maturing in certain segments in near future?

5. What are the some of the best cost optimization strategies with vendors that some well-entrenched players have gained success with?

6. Which are the key perspectives that the C-suite are leveraging to move businesses to new growth trajectory?

7. Which government regulations might challenge the status of key regional markets?

8. How will the emerging political and economic scenario affect opportunities in key growth areas?

9. What are some of the value-grab opportunities in various segments?

10. What will be the barrier to entry for new players in the market?

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

Custom Market Research Services

TMR offers custom market research services that help clients to get information on their business scenario required where syndicated solutions are not enough.

REQUEST CUSTOMIZATION

Radiation Tolerant Motor Drive Market

Pre Book