Get In Touch

A resonator is essentially a device that exhibits resonance or resonant behavior. A resonators oscillates at a specific frequency known as the resonator’s resonant frequency. These oscillations can be either mechanical or electromagnetic. These devices are beneficial for generating waves of specific frequencies or to select certain frequencies via a signal. The quartz crystals used in devices including radio transmitters and quartz watches yield oscillations of specific frequency. Exhaust pipes in automobiles are premeditated as acoustic resonators that work in tandem with the muffler in order to reduce noise, by creating sound waves that cancel each other out. A resonator intake duct is a device that is used to reduce the pressure of the waves that are formed in the air intake duct of the engine, thereby decreasing the noise of engines.

Increasing implementation of ARIDs or aftermarket automotive resonator intake ducts by the vehicle enthusiasts is one of the primary factors driving the growth of the automotive resonator intake ducts market. The OEM fitted resonators reduce the engine noises and hence automobile fanatics are adopting aftermarket automated resonator intake duct (ARIDs) in order to increase engine rumbles. The noise generated by the engine can be raised with custom-made components on branded vehicles which attracts the young automobile aficionados. Additionally, the aftermarket alternatives offer a range of enhanced resonator units with a variety of branded vehicle engine grunts dependent on the frequency of the resonator. Furthermore, the availability of electronically controlled resonators where the frequencies can be set at will, is likely to fuel the growth of the automotive resonator intake ducts market further.

Another factor that is gaining momentum in the market is the 3D printing of automotive resonator intake ducts and other plastic parts. 3D printing are being used to design wiring connectors and harnesses. Hence, the 3D printing technology offers an advantage over the traditional manufacturing processes and many companies are using 3D printing for designing and development. This increase in adoption of 3D printing is likely to drive the overall market.

The global automotive resonator intake ducts market is segmented on the basis of end-user and geography. On the basis of end-user, the market has been bifurcated into aftermarket, and OEMs. In 2016, the OEMs held a significant share of the global automotive resonator intake ducts market. This segment is likely to dominate the overall market during the forecast period. Automotive resonator intake ducts are customary OEM fitments that improve the performance of an automotive engine and decrease engine noise. As the automobiles production is increasing at a significant rate, the end user segment is expected to observe a sturdy growth in the coming years.

In terms of geography, the global automotive resonator intake ducts market can be segmented into North America, Europe, Asia Pacific, Latin America, and Middle East & Africa. Asia Pacific is likely to dominate the global market during the forecast period. The rising demand for cars in the emerging economies such as China and India is the primary factor for the growth of this market during the forecast period. Additionally, increasing number of domestic automakers, high population, large-scale plastic production facilities in China, and the resulting rise in demand for vehicles, coupled with the presence of a large number of mid-segment and entry level vehicles are likely to augment the growth of the market in the Asia Pacific region.

The global automotive resonator intake ducts market is comprised of a small number of key players where the companies compete on the basis of weight reduction, product price, performance, quality, customer-focus, and technological advancements. Low operating costs has resulted into the rise in the amount of small vendors that are primarily concentrating on fast growing segments. Major players operating in the global automotive resonator intake ducts market are MAHLE, MANN+HUMMEL, Tenneco, Magneti Marelli, DURA, Avon Automotive, DSM, Hutchinson, Mitsui Chemicals, WTX Automotive Group, and Woco.

The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.

The study is a source of reliable data on:

  • Market segments and sub-segments
  • Market trends and dynamics
  • Supply and demand
  • Market size
  • Current trends/opportunities/challenges
  • Competitive landscape
  • Technological breakthroughs
  • Value chain and stakeholder analysis

The regional analysis covers:

  • North America (U.S. and Canada)
  • Latin America (Mexico, Brazil, Peru, Chile, and others)
  • Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
  • Eastern Europe (Poland and Russia)
  • Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
  • Middle East and Africa (GCC, Southern Africa, and North Africa)

The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.

A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.

Highlights of the report:

  • A complete backdrop analysis, which includes an assessment of the parent market
  • Important changes in market dynamics
  • Market segmentation up to the second or third level
  • Historical, current, and projected size of the market from the standpoint of both value and volume
  • Reporting and evaluation of recent industry developments
  • Market shares and strategies of key players
  • Emerging niche segments and regional markets
  • An objective assessment of the trajectory of the market
  • Recommendations to companies for strengthening their foothold in the market    

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

This study by TMR is all-encompassing framework of the dynamics of the market. It mainly comprises critical assessment of consumers' or customers' journeys, current and emerging avenues, and strategic framework to enable CXOs take effective decisions.

Our key underpinning is the 4-Quadrant Framework EIRS that offers detailed visualization of four elements:

  • Customer Experience Maps
  • Insights and Tools based on data-driven research
  • Actionable Results to meet all the business priorities
  • Strategic Frameworks to boost the growth journey

The study strives to evaluate the current and future growth prospects, untapped avenues, factors shaping their revenue potential, and demand and consumption patterns in the global market by breaking it into region-wise assessment.

The following regional segments are covered comprehensively:

  • North America
  • Asia Pacific
  • Europe
  • Latin America
  • The Middle East and Africa

The EIRS quadrant framework in the report sums up our wide spectrum of data-driven research and advisory for CXOs to help them make better decisions for their businesses and stay as leaders.

Below is a snapshot of these quadrants.

1. Customer Experience Map

The study offers an in-depth assessment of various customers’ journeys pertinent to the market and its segments. It offers various customer impressions about the products and service use. The analysis takes a closer look at their pain points and fears across various customer touchpoints. The consultation and business intelligence solutions will help interested stakeholders, including CXOs, define customer experience maps tailored to their needs. This will help them aim at boosting customer engagement with their brands.

2. Insights and Tools

The various insights in the study are based on elaborate cycles of primary and secondary research the analysts engage with during the course of research. The analysts and expert advisors at TMR adopt industry-wide, quantitative customer insights tools and market projection methodologies to arrive at results, which makes them reliable. The study not just offers estimations and projections, but also an uncluttered evaluation of these figures on the market dynamics. These insights merge data-driven research framework with qualitative consultations for business owners, CXOs, policy makers, and investors. The insights will also help their customers overcome their fears.

3. Actionable Results

The findings presented in this study by TMR are an indispensable guide for meeting all business priorities, including mission-critical ones. The results when implemented have shown tangible benefits to business stakeholders and industry entities to boost their performance. The results are tailored to fit the individual strategic framework. The study also illustrates some of the recent case studies on solving various problems by companies they faced in their consolidation journey.

4. Strategic Frameworks

The study equips businesses and anyone interested in the market to frame broad strategic frameworks. This has become more important than ever, given the current uncertainty due to COVID-19. The study deliberates on consultations to overcome various such past disruptions and foresees new ones to boost the preparedness. The frameworks help businesses plan their strategic alignments for recovery from such disruptive trends. Further, analysts at TMR helps you break down the complex scenario and bring resiliency in uncertain times.

The report sheds light on various aspects and answers pertinent questions on the market. Some of the important ones are:

1. What can be the best investment choices for venturing into new product and service lines?

2. What value propositions should businesses aim at while making new research and development funding?

3. Which regulations will be most helpful for stakeholders to boost their supply chain network?

4. Which regions might see the demand maturing in certain segments in near future?

5. What are the some of the best cost optimization strategies with vendors that some well-entrenched players have gained success with?

6. Which are the key perspectives that the C-suite are leveraging to move businesses to new growth trajectory?

7. Which government regulations might challenge the status of key regional markets?

8. How will the emerging political and economic scenario affect opportunities in key growth areas?

9. What are some of the value-grab opportunities in various segments?

10. What will be the barrier to entry for new players in the market?

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

Custom Market Research Services

TMR offers custom market research services that help clients to get information on their business scenario required where syndicated solutions are not enough.


Automotive Resonator Intake Ducts Market

Pre Book