Rebar coupler, also called mechanical splice, is primarily used for joining the lengths of a rebar (short for reinforcing bar) together. It creates couplers for connecting reinforcement mashes or reinforce bars, whose bar ends are parallel and are in contact. Builders use mechanical rebar coupler for eliminating laps and alleviating the problem of congestion associated with difficult construction in masonry cells. Reinforcing bar coupling includes features required in a rebar joining system for unequalled simplicity of installation. Rebar couplers are intended to splice the bars of same diameter, where one bar can be rotated and is free to move. The spliced bars with rebar coupler act as a continuous length of reinforced steel bars by offering full strength in compression and tension and stress reversal applications. Implementation of rebar coupler leads to self-aligning taper threaded design, which further offers structural integrity and continuity. Rebar couplers can be created between reinforcement meshes or reinforcing bars and the reinforcement object can have different number of bars or can be of different type. These can be attached at each location where the gap along the bar end is shorter than the length of the coupler, or where the bar ends are parallel, or the offset perpendicular to the bar end legs is less than the diameter of the bars.

The ability of rebar coupler to develop higher tensile strength than lap slicing in reinforced concrete is expected to drive the growth of the rebar coupler market during the forecast period. Furthermore, these couplers are quick and easy to install, which boosts their implementation in the construction industry. Demand for rebar coupler is projected to increase owing to its increasing implementation in construction joints in the precast sector. Rebar couplers can also be used in dealing with configuration issues and rebar tolerance in in-situ cast construction. These factors are expected to propel the growth of the rebar coupler market during the forecast period. Furthermore, growing awareness regarding the advantages of rebar couplers over the lapped joints is also likely to spur the demand for rebar couplers in the next few years.

Increasing focus for development of high-strength and quick-to-install coupling systems is projected to enhance the demand for rebar couplers during the forecast period. Furthermore, rise in demand for parallel thread couplers in developing large infrastructure projects due to their full strength connection and improved fatigue resistance is projected to create opportunities for the rebar coupler market growth in the near future. Additionally, implementation of cutting-edge technology and superior-quality raw materials is likely to draw the attention of new customers toward the use of rebar couplers. The need to meet complex local product preferences and national standards is also projected to make it challenging for manufacturers to develop a wide customer base.

The global rebar coupler market can be segmented based on type, product, application, and region. Based on product, the market can be categorized into grout sleeve, parallel thread standard bar, MBT, and tapered thread bar couplers. The application segment of the rebar coupler market can be bifurcated into building construction and others. The others segments include high-rise buildings, bridges, and other types of constructions. In terms of region, the global rebar coupler market can be segmented into North America, Europe, Asia Pacific, Middle East & Africa, and South America. The rebar coupler market in Asia Pacific is expected to gain major share of the global market during the forecast period. The rebar coupler market in North America is projected to witness significant growth in the near future.

Prominent players operating in the global rebar coupler market are AGF Group, nVent, Peikko Group Corporation, Terwa, CRH plc, Dextra Group, Henglian, Glus, Tokyo Tekko Co. Ltd., BAR-US, Sida Jianmao, and Preshcon Industries Pte Ltd.

The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.

The study is a source of reliable data on:

  • Market segments and sub-segments
  • Market trends and dynamics
  • Supply and demand
  • Market size
  • Current trends/opportunities/challenges
  • Competitive landscape
  • Technological breakthroughs
  • Value chain and stakeholder analysis

The regional analysis covers:

  • North America (U.S. and Canada)
  • Latin America (Mexico, Brazil, Peru, Chile, and others)
  • Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
  • Eastern Europe (Poland and Russia)
  • Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
  • Middle East and Africa (GCC, Southern Africa, and North Africa)

The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.

A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.

Highlights of the report:

  • A complete backdrop analysis, which includes an assessment of the parent market
  • Important changes in market dynamics
  • Market segmentation up to the second or third level
  • Historical, current, and projected size of the market from the standpoint of both value and volume
  • Reporting and evaluation of recent industry developments
  • Market shares and strategies of key players
  • Emerging niche segments and regional markets
  • An objective assessment of the trajectory of the market
  • Recommendations to companies for strengthening their foothold in the market   

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

This study by TMR is all-encompassing framework of the dynamics of the market. It mainly comprises critical assessment of consumers' or customers' journeys, current and emerging avenues, and strategic framework to enable CXOs take effective decisions.

Our key underpinning is the 4-Quadrant Framework EIRS that offers detailed visualization of four elements:

  • Customer Experience Maps
  • Insights and Tools based on data-driven research
  • Actionable Results to meet all the business priorities
  • Strategic Frameworks to boost the growth journey

The study strives to evaluate the current and future growth prospects, untapped avenues, factors shaping their revenue potential, and demand and consumption patterns in the global market by breaking it into region-wise assessment.

The following regional segments are covered comprehensively:

  • North America
  • Asia Pacific
  • Europe
  • Latin America
  • The Middle East and Africa

The EIRS quadrant framework in the report sums up our wide spectrum of data-driven research and advisory for CXOs to help them make better decisions for their businesses and stay as leaders.

Below is a snapshot of these quadrants.

1. Customer Experience Map

The study offers an in-depth assessment of various customers’ journeys pertinent to the market and its segments. It offers various customer impressions about the products and service use. The analysis takes a closer look at their pain points and fears across various customer touchpoints. The consultation and business intelligence solutions will help interested stakeholders, including CXOs, define customer experience maps tailored to their needs. This will help them aim at boosting customer engagement with their brands.

2. Insights and Tools

The various insights in the study are based on elaborate cycles of primary and secondary research the analysts engage with during the course of research. The analysts and expert advisors at TMR adopt industry-wide, quantitative customer insights tools and market projection methodologies to arrive at results, which makes them reliable. The study not just offers estimations and projections, but also an uncluttered evaluation of these figures on the market dynamics. These insights merge data-driven research framework with qualitative consultations for business owners, CXOs, policy makers, and investors. The insights will also help their customers overcome their fears.

3. Actionable Results

The findings presented in this study by TMR are an indispensable guide for meeting all business priorities, including mission-critical ones. The results when implemented have shown tangible benefits to business stakeholders and industry entities to boost their performance. The results are tailored to fit the individual strategic framework. The study also illustrates some of the recent case studies on solving various problems by companies they faced in their consolidation journey.

4. Strategic Frameworks

The study equips businesses and anyone interested in the market to frame broad strategic frameworks. This has become more important than ever, given the current uncertainty due to COVID-19. The study deliberates on consultations to overcome various such past disruptions and foresees new ones to boost the preparedness. The frameworks help businesses plan their strategic alignments for recovery from such disruptive trends. Further, analysts at TMR helps you break down the complex scenario and bring resiliency in uncertain times.

The report sheds light on various aspects and answers pertinent questions on the market. Some of the important ones are:

1. What can be the best investment choices for venturing into new product and service lines?

2. What value propositions should businesses aim at while making new research and development funding?

3. Which regulations will be most helpful for stakeholders to boost their supply chain network?

4. Which regions might see the demand maturing in certain segments in near future?

5. What are the some of the best cost optimization strategies with vendors that some well-entrenched players have gained success with?

6. Which are the key perspectives that the C-suite are leveraging to move businesses to new growth trajectory?

7. Which government regulations might challenge the status of key regional markets?

8. How will the emerging political and economic scenario affect opportunities in key growth areas?

9. What are some of the value-grab opportunities in various segments?

10. What will be the barrier to entry for new players in the market?

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

Custom Market Research Services

TMR offers custom market research services that help clients to get information on their business scenario required where syndicated solutions are not enough.

REQUEST CUSTOMIZATION

Rebar Coupler Market

Pre Book