NiCd Battery Charging IC Market: Overview

The important part of the power supply design is its circuits to recharge the batteries in a portable device. Most of the portable applications requires the fast battery charging. The cost and complexity of the charging system depends on the charging time and the type of the battery being used. The Nickel Cadmium battery charging IC uses analog inputs for controlling of the charge currents and voltage, and can be programmed by hardwired or host. With the use of the buck or boost topology, the high efficiency is achieved with synchronous rectification. The NiCd battery charging IC additionally contains secondary backup termination method that has a programmable time and limiting temperature. The IC is packaged with a protective cover that includes battery voltage detection (over and under voltage), temperature detection for latch, and under voltage power supply input with hysteresis. Nickel Cadmium batteries requires definite charge termination, so as to maximize the cell capacity and operating time and prevent from the overcharging that might results into the reduction of battery life.

NiCd Battery Charging IC Market: Drivers and Restraints

The NiCd battery charging IC offers large number of features. Due to the fast charging controller for series cell, NiCd batteries are widely used. The major factor that drives the growth of the Nickel Cadmium battery charging IC market is the programmable fast charge current beyond 2A with external sense resistor. Automatic backup battery switchover is yet another driver that drives the NiCd battery charging IC market. The other features of the NiCd battery charging IC includes high duty cycle of around 99.99% for the low drop out operation, input current limiting, high efficiency of more than 95%, inexpensive, and reliable. Also in sleep mode the NiCd battery charging IC offers negligible battery drain that is almost less than 1µA. One of the major parameter that restricts the growth of the NiCd battery charging IC market is the complexity in its charging. To charge the NiCd battery charging IC, often a low cost chargers are used for temperature sensing, to complete the fast charge, however this can be inaccurate. The use of NiCd battery charging IC in the power tools, and low impedance applications that requires high current for the shorter periods is expected to boost the market in the near future.

NiCd Battery Charging IC Market: Key Segments

The global NiCd Battery Charging IC Market is segmented into battery chargers, applications, end use and geography. Based on the battery type, the global NiCd battery charging IC market is segmented in to linear battery chargers, switching battery chargers, boost battery chargers, module battery chargers and others. Based on the applications, the global NiCd battery charging IC market is segmented into laptops, smart mobiles, portable stereos, cordless phones, digital cameras and others. On the basis of end use, the global NiCd battery charging IC market is segmented into consumer electronics, power industry, automotive, and others. Geographically, NiCd Battery Charging IC Market can be segmented into North America, Europe, Middle East & Africa, Asia Pacific and Latin America. Asia pacific region is expected to be an emerging market for the global NiCd battery charging IC market followed by North America. The increasing demand for the application of the NiCd battery charging IC is the major factor that drives the growth of the NiCd battery charging IC market in Asia Pacific region.

NiCd Battery Charging IC Market: Key Players

Some of the key players operating in the global NiCd Battery Charging IC Market are Texas Instruments Incorporated, Analog Devices Inc, Maxim integrated Products Inc, Linear Technology, STMicroelectronics, Microchip technology Inc, Sichuan Changhong Battery Co., Ltd., ROHM Semiconductor, Vishay Intertechnology, Inc.and System Sunlight SA among others.

The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.

The study is a source of reliable data on:

  • Market segments and sub-segments
  • Market trends and dynamics
  • Supply and demand
  • Market size
  • Current trends/opportunities/challenges
  • Competitive landscape
  • Technological breakthroughs
  • Value chain and stakeholder analysis

The regional analysis covers:

  • North America (U.S. and Canada)
  • Latin America (Mexico, Brazil, Peru, Chile, and others)
  • Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
  • Eastern Europe (Poland and Russia)
  • Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
  • Middle East and Africa (GCC, Southern Africa, and North Africa)

The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.

A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.

Highlights of the report:

  • A complete backdrop analysis, which includes an assessment of the parent market
  • Important changes in market dynamics
  • Market segmentation up to the second or third level
  • Historical, current, and projected size of the market from the standpoint of both value and volume
  • Reporting and evaluation of recent industry developments
  • Market shares and strategies of key players
  • Emerging niche segments and regional markets
  • An objective assessment of the trajectory of the market
  • Recommendations to companies for strengthening their foothold in the market   

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

This study by TMR is all-encompassing framework of the dynamics of the market. It mainly comprises critical assessment of consumers' or customers' journeys, current and emerging avenues, and strategic framework to enable CXOs take effective decisions.

Our key underpinning is the 4-Quadrant Framework EIRS that offers detailed visualization of four elements:

  • Customer Experience Maps
  • Insights and Tools based on data-driven research
  • Actionable Results to meet all the business priorities
  • Strategic Frameworks to boost the growth journey

The study strives to evaluate the current and future growth prospects, untapped avenues, factors shaping their revenue potential, and demand and consumption patterns in the global market by breaking it into region-wise assessment.

The following regional segments are covered comprehensively:

  • North America
  • Asia Pacific
  • Europe
  • Latin America
  • The Middle East and Africa

The EIRS quadrant framework in the report sums up our wide spectrum of data-driven research and advisory for CXOs to help them make better decisions for their businesses and stay as leaders.

Below is a snapshot of these quadrants.

1. Customer Experience Map

The study offers an in-depth assessment of various customers’ journeys pertinent to the market and its segments. It offers various customer impressions about the products and service use. The analysis takes a closer look at their pain points and fears across various customer touchpoints. The consultation and business intelligence solutions will help interested stakeholders, including CXOs, define customer experience maps tailored to their needs. This will help them aim at boosting customer engagement with their brands.

2. Insights and Tools

The various insights in the study are based on elaborate cycles of primary and secondary research the analysts engage with during the course of research. The analysts and expert advisors at TMR adopt industry-wide, quantitative customer insights tools and market projection methodologies to arrive at results, which makes them reliable. The study not just offers estimations and projections, but also an uncluttered evaluation of these figures on the market dynamics. These insights merge data-driven research framework with qualitative consultations for business owners, CXOs, policy makers, and investors. The insights will also help their customers overcome their fears.

3. Actionable Results

The findings presented in this study by TMR are an indispensable guide for meeting all business priorities, including mission-critical ones. The results when implemented have shown tangible benefits to business stakeholders and industry entities to boost their performance. The results are tailored to fit the individual strategic framework. The study also illustrates some of the recent case studies on solving various problems by companies they faced in their consolidation journey.

4. Strategic Frameworks

The study equips businesses and anyone interested in the market to frame broad strategic frameworks. This has become more important than ever, given the current uncertainty due to COVID-19. The study deliberates on consultations to overcome various such past disruptions and foresees new ones to boost the preparedness. The frameworks help businesses plan their strategic alignments for recovery from such disruptive trends. Further, analysts at TMR helps you break down the complex scenario and bring resiliency in uncertain times.

The report sheds light on various aspects and answers pertinent questions on the market. Some of the important ones are:

1. What can be the best investment choices for venturing into new product and service lines?

2. What value propositions should businesses aim at while making new research and development funding?

3. Which regulations will be most helpful for stakeholders to boost their supply chain network?

4. Which regions might see the demand maturing in certain segments in near future?

5. What are the some of the best cost optimization strategies with vendors that some well-entrenched players have gained success with?

6. Which are the key perspectives that the C-suite are leveraging to move businesses to new growth trajectory?

7. Which government regulations might challenge the status of key regional markets?

8. How will the emerging political and economic scenario affect opportunities in key growth areas?

9. What are some of the value-grab opportunities in various segments?

10. What will be the barrier to entry for new players in the market?

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

Custom Market Research Services

TMR offers custom market research services that help clients to get information on their business scenario required where syndicated solutions are not enough.

REQUEST CUSTOMIZATION

Nicd Battery Charging Ic Market

Pre Book