Mist Eliminator Market: Overview
Mist eliminator is the process of elimination of entrained liquid droplets from a vapor stream and also removal of unwanted substances (impurities) from a liquid or gas stream by using wire mesh as an eliminator. A mist eliminator is a heavy-duty coalescing type filter designed and engineered to remove oil, water, and particulate matters from compressed air stream/liquid stream. Mist eliminator increases efficiency of the separation operation of a gas or liquid stream that affects the eliminator. The stream of gas generated from a liquid moves up through the column (with fine particles of liquid trapped in the stream) and intrudes against the mist eliminator. As the liquid particles in the gas stream come into contact with the surface of the wires in the mist eliminator, they are temporarily retained due to wettability and capillarity action of the wires. The surface tension of the liquid also plays an important role before the droplet grows to a larger size, and finally drop by gravity to the bottom of the column.
Mist Eliminator Market: Dynamics & Trends
Mist eliminators or particles in the form of liquid droplets from wet scrubbers. Due to stricter emission norms, high efficiency entrainment separators or mist eliminators are incorporated in devices such as venture scrubbers and condensation scrubbers. Their efficiency is high and removal of one micrometer sized particle is also possible. Engineered mist eliminator can reduce liquid carryover of an impure liquid or a gas stream by a factor of one hundred, reduce drop head losses by 50%, and increase capacity factor of gas stream by factors of three or four. For efficient and safe collection of impurities, the Brownian movement action is the dominant collection mechanism. The inertial impaction mechanism is responsible for removing most particles of diameter less than 10 micrometer. Vane packs and mesh pads are typical demisters (mist eliminators) in production. Axial flow cyclones are now gaining attention due to some of the highly desired advantages such as good efficiency at higher pressures, high holding capacities of gas/liquid, foam breaking, and non-fouling. The cyclone type mist eliminator is approximately 10 times the capacity of a mesh type and four times the capacity of the vane pack mist eliminator.
Mist Eliminator Market: Segmentation
Based on end-use, the mist eliminator market can be segmented into mist removal, pollution control, and improvement of impurity separating efficiency. In terms of technology, the market can be divided into Brownian diffusion, direct interception, and inertial impaction. In terms of application, the market can be segregated into absorbers, crystallizers, cooling towers, dehydrators, distillation columns, evaporators, and others. In terms of type, the mist eliminator market can be classified into mesh pad, vane pack, cyclone, and fiber-beds. Based on region, the global mist eliminator market can be divided into North America, Latin America, Europe, Asia Pacific, and Middle East & Africa.
Mist Eliminator Market: Region-wise Outlook
The global mist eliminator market is driven by the rising demand for cleaner air/liquid in utilities, oil and gas industries to reduce emissions, automobile/manufacturing/chemical and pharmaceutical industries to maintain less toxicity of the waste generated. Asia Pacific is a rapidly growing region of the mist eliminator market.
Mist Eliminator Market: Key Players
Key players operating in the global mist eliminator market include AMACS Process Tower Internals, Okutani Ltd., Hilliard Corporation, and Munters.
This study by TMR is all-encompassing framework of the dynamics of the market. It mainly comprises critical assessment of consumers' or customers' journeys, current and emerging avenues, and strategic framework to enable CXOs take effective decisions.
Our key underpinning is the 4-Quadrant Framework EIRS that offers detailed visualization of four elements:
- Customer Experience Maps
- Insights and Tools based on data-driven research
- Actionable Results to meet all the business priorities
- Strategic Frameworks to boost the growth journey
The study strives to evaluate the current and future growth prospects, untapped avenues, factors shaping their revenue potential, and demand and consumption patterns in the global market by breaking it into region-wise assessment.
The following regional segments are covered comprehensively:
- North America
- Asia Pacific
- Latin America
- The Middle East and Africa
The EIRS quadrant framework in the report sums up our wide spectrum of data-driven research and advisory for CXOs to help them make better decisions for their businesses and stay as leaders.
Below is a snapshot of these quadrants.
1. Customer Experience Map
The study offers an in-depth assessment of various customers’ journeys pertinent to the market and its segments. It offers various customer impressions about the products and service use. The analysis takes a closer look at their pain points and fears across various customer touchpoints. The consultation and business intelligence solutions will help interested stakeholders, including CXOs, define customer experience maps tailored to their needs. This will help them aim at boosting customer engagement with their brands.
2. Insights and Tools
The various insights in the study are based on elaborate cycles of primary and secondary research the analysts engage with during the course of research. The analysts and expert advisors at TMR adopt industry-wide, quantitative customer insights tools and market projection methodologies to arrive at results, which makes them reliable. The study not just offers estimations and projections, but also an uncluttered evaluation of these figures on the market dynamics. These insights merge data-driven research framework with qualitative consultations for business owners, CXOs, policy makers, and investors. The insights will also help their customers overcome their fears.
3. Actionable Results
The findings presented in this study by TMR are an indispensable guide for meeting all business priorities, including mission-critical ones. The results when implemented have shown tangible benefits to business stakeholders and industry entities to boost their performance. The results are tailored to fit the individual strategic framework. The study also illustrates some of the recent case studies on solving various problems by companies they faced in their consolidation journey.
4. Strategic Frameworks
The study equips businesses and anyone interested in the market to frame broad strategic frameworks. This has become more important than ever, given the current uncertainty due to COVID-19. The study deliberates on consultations to overcome various such past disruptions and foresees new ones to boost the preparedness. The frameworks help businesses plan their strategic alignments for recovery from such disruptive trends. Further, analysts at TMR helps you break down the complex scenario and bring resiliency in uncertain times.
The report sheds light on various aspects and answers pertinent questions on the market. Some of the important ones are:
1. What can be the best investment choices for venturing into new product and service lines?
2. What value propositions should businesses aim at while making new research and development funding?
3. Which regulations will be most helpful for stakeholders to boost their supply chain network?
4. Which regions might see the demand maturing in certain segments in near future?
5. What are the some of the best cost optimization strategies with vendors that some well-entrenched players have gained success with?
6. Which are the key perspectives that the C-suite are leveraging to move businesses to new growth trajectory?
7. Which government regulations might challenge the status of key regional markets?
8. How will the emerging political and economic scenario affect opportunities in key growth areas?
9. What are some of the value-grab opportunities in various segments?
10. What will be the barrier to entry for new players in the market?
Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.