Integrated Motors and Drives Market - Overview

Integrated motors and drives combine motor with its controlling electronics into a single package. Motor and their control electronics were not constructed equally. Both had different structural environment. Both were usually situated and operated in a very different site (location) and were usually connected by cables for power, control and communication, until integrated motors and drives was introduced in the market. The integrated motors and drives technology helps in combining motors and their control electronics as one package. The integrated approach helps in reducing costs by approximately 20%-40%. Also, ownership cost of integrated motors and drives is quite low. The integrated solution improves system efficiencies and reliability when compared to non-integrated configurations.

Integrated motors and drives significantly improves the overall efficiency, reliability, and electromagnetic compatibility. Due to the integration capability, there are fewer interface that need to be completed by the end-user. Also, the specifics of a motor can easily be embedded with the controller. This largely includes characteristics/type of motor, feedback type and resolution. The efficiency of the drive and the motor is improved since the drive matches appropriately with the motor and it eliminates the need for additional wiring between the motor and the drive. Up until now (due to non-integration of motor and drive), the long wiring had resulted in wastage of power, both directly and indirectly.

Integrated Motors and Drives Market - Trends and Opportunities

The integrated motors and drives market is driven by the growing need to reduce total cost of ownership and the need to increase efficiency. The integrated motors and drives market is also driven by the strong acceptance and awareness about advance solutions among various industry verticals. Integrated motor and drives is not a very new concept; it has existed in the market for a while and is being used by industries since a long time. The concept of integrated solutions came into the picture in mid 1990s and its demand continues till today. Over time, integrated motor-drive technology has improved, with vendors introducing more improved versions of the solution in the marketplace. For instance, few manufacturers of integrated motor and drive solutions have refined adapter-plate design to simplify motor or drive replacement in response to customer concerns. Manufacturers have continuously tried to improve the solution based on the application that they are catering to. This has further driven the integrated motors and drives market growth over time.  Adoption of integrated motor and drives solution is expected to offer significant opportunity in the coming years due to strong focus on automation among industrial companies.

Integrated Motors and Drives Market - Segmentation

The integrated motor and drive market can be segmented on the basis of type, application, distribution channel, services, and region. Based on type, the integrated motors and drives market can be categorized into general motion control (GMC) and computer numerical control (CNC) motors. On the basis of application, the integrated motors and drives market can be bifurcated into transportation/mobility, conveyor systems, fluid dispensing and pumping system, industrial robots and others. The transportation and mobility application can be further bifurcated into door control, aircraft seating, cabin, and others. In terms of distribution channel, the integrated motors and drives market can be bifurcated into company owned distribution channel, and third-party distribution channel. On the basis of services, the market can be categorized into support services and installation and maintenance services. On the basis of region, the integrated motors and drives market can be divided into Europe, Asia Pacific, North America, Middle East & Africa, and South America.

Integrated Motors and Drives Market - Key Players

Manufacturers operating in the market are focusing on customization of integrated solutions so that they are able to efficiently cater to the requirements in each application area. Key players operating in the integrated motors and drives market include Elmo Motion Control Ltd., ElectroCraft, Inc., Schneider Electric, Tolomatic, ABB Group, Rockwell Automation, Delta Electronics, Inc., B&R Industrial Automation Company, and Kollmorgen Servotronix Ltd.

The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.

The study is a source of reliable data on:

  • Market segments and sub-segments
  • Market trends and dynamics
  • Supply and demand
  • Market size
  • Current trends/opportunities/challenges
  • Competitive landscape
  • Technological breakthroughs
  • Value chain and stakeholder analysis

The regional analysis covers:

  • North America (U.S. and Canada)
  • Latin America (Mexico, Brazil, Peru, Chile, and others)
  • Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
  • Eastern Europe (Poland and Russia)
  • Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
  • Middle East and Africa (GCC, Southern Africa, and North Africa)

The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.

A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.

Highlights of the report:

  • A complete backdrop analysis, which includes an assessment of the parent market
  • Important changes in market dynamics
  • Market segmentation up to the second or third level
  • Historical, current, and projected size of the market from the standpoint of both value and volume
  • Reporting and evaluation of recent industry developments
  • Market shares and strategies of key players
  • Emerging niche segments and regional markets
  • An objective assessment of the trajectory of the market
  • Recommendations to companies for strengthening their foothold in the market   

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

This study by TMR is all-encompassing framework of the dynamics of the market. It mainly comprises critical assessment of consumers' or customers' journeys, current and emerging avenues, and strategic framework to enable CXOs take effective decisions.

Our key underpinning is the 4-Quadrant Framework EIRS that offers detailed visualization of four elements:

  • Customer Experience Maps
  • Insights and Tools based on data-driven research
  • Actionable Results to meet all the business priorities
  • Strategic Frameworks to boost the growth journey

The study strives to evaluate the current and future growth prospects, untapped avenues, factors shaping their revenue potential, and demand and consumption patterns in the global market by breaking it into region-wise assessment.

The following regional segments are covered comprehensively:

  • North America
  • Asia Pacific
  • Europe
  • Latin America
  • The Middle East and Africa

The EIRS quadrant framework in the report sums up our wide spectrum of data-driven research and advisory for CXOs to help them make better decisions for their businesses and stay as leaders.

Below is a snapshot of these quadrants.

1. Customer Experience Map

The study offers an in-depth assessment of various customers’ journeys pertinent to the market and its segments. It offers various customer impressions about the products and service use. The analysis takes a closer look at their pain points and fears across various customer touchpoints. The consultation and business intelligence solutions will help interested stakeholders, including CXOs, define customer experience maps tailored to their needs. This will help them aim at boosting customer engagement with their brands.

2. Insights and Tools

The various insights in the study are based on elaborate cycles of primary and secondary research the analysts engage with during the course of research. The analysts and expert advisors at TMR adopt industry-wide, quantitative customer insights tools and market projection methodologies to arrive at results, which makes them reliable. The study not just offers estimations and projections, but also an uncluttered evaluation of these figures on the market dynamics. These insights merge data-driven research framework with qualitative consultations for business owners, CXOs, policy makers, and investors. The insights will also help their customers overcome their fears.

3. Actionable Results

The findings presented in this study by TMR are an indispensable guide for meeting all business priorities, including mission-critical ones. The results when implemented have shown tangible benefits to business stakeholders and industry entities to boost their performance. The results are tailored to fit the individual strategic framework. The study also illustrates some of the recent case studies on solving various problems by companies they faced in their consolidation journey.

4. Strategic Frameworks

The study equips businesses and anyone interested in the market to frame broad strategic frameworks. This has become more important than ever, given the current uncertainty due to COVID-19. The study deliberates on consultations to overcome various such past disruptions and foresees new ones to boost the preparedness. The frameworks help businesses plan their strategic alignments for recovery from such disruptive trends. Further, analysts at TMR helps you break down the complex scenario and bring resiliency in uncertain times.

The report sheds light on various aspects and answers pertinent questions on the market. Some of the important ones are:

1. What can be the best investment choices for venturing into new product and service lines?

2. What value propositions should businesses aim at while making new research and development funding?

3. Which regulations will be most helpful for stakeholders to boost their supply chain network?

4. Which regions might see the demand maturing in certain segments in near future?

5. What are the some of the best cost optimization strategies with vendors that some well-entrenched players have gained success with?

6. Which are the key perspectives that the C-suite are leveraging to move businesses to new growth trajectory?

7. Which government regulations might challenge the status of key regional markets?

8. How will the emerging political and economic scenario affect opportunities in key growth areas?

9. What are some of the value-grab opportunities in various segments?

10. What will be the barrier to entry for new players in the market?

With a robust experience in creating exceptional market reports, Transparency Market Research has emerged as one of the trusted market research companies among a large number of stakeholders and CXOs. Every report at Transparency Market Research goes through rigorous research activity in every aspect. The researchers at TMR keep a close watch on the market and extract beneficial growth-boosting points. These points help the stakeholders to strategize their business plans accordingly.

TMR researchers conduct exhaustive qualitative and quantitative research. This research involves taking inputs from the experts in the market, focused attention on recent developments, and others. This method of research makes TMR stand out from other market research firms.

Here's how Transparency Market Research helps the stakeholders and CXOs through the reports:

Inculcation and Evaluation of Strategic Collaborations: The TMR researchers analyze recent strategic activities like mergers, acquisitions, partnerships, collaborations, and joint ventures. All the information is compiled and included in the report.

Perfect Market Size Estimations: The report analyzes the demographics, growth potential, and capability of the market through the forecast period. This factor leads to the estimation of the market size and also provides an outline about how the market will retrieve growth during the assessment period.

Investment Research: The report focuses on the ongoing and upcoming investment opportunities across a particular market. These developments make the stakeholders aware of the current investment scenario across the market.

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

Custom Market Research Services

TMR offers custom market research services that help clients to get information on their business scenario required where syndicated solutions are not enough.


Integrated Motors And Drives Market

Pre Book