Get In Touch

Automotive motor is a machine which is used to convert electrical energy into mechanical energy. In case of an internal combustion engine (ICE), the fuel is burnt by the combustion process, and the heat generated is converted into mechanical energy by the motor. While, in case of an electric vehicle, the electric motors convert electrical energy into mechanical energy.

Increasing production of passenger as well as commercial vehicle is expected to boost the automotive motor market during the forecast period. Stringent rules and regulations laid down by the governments of various nations across the world for the incorporation of various active safety systems such as lane keep assist, electronic stability control (ESC), and antilock braking system (ABS) in vehicles are also likely to drive the automotive motor market in the near future. Rising need for more fuel-efficient vehicles boosts the need for automotive motors with higher efficiency and better performance. This is anticipated to propel the automotive motor market in the next few years.

The automotive motor faces an issue of having to be replaced after certain intervals of time due to prolonged use. This is anticipated to hamper the growth of the automotive motor market during the forecast period. Increasing efforts are being undertaken by both OEMs (original equipment manufacturers) and governments of various countries across the world to develop and introduce electric vehicles on the road. Electric vehicles require less number of motors for their operation. This is likely to decline the automotive motor market to some extent during the forecast period.

Based on type, the automotive motor market can be segmented into DC brushed motor, DC brushless motor, stepper motor, and traction motor. Brushed DC motors are synchronous electric motors which commute electronically. A brushed DC motor consists of DC current powering magnets, which move the rotor within the stator. While, a brushless DC motor consists of a step motor controller in order to generate rotary motion. Consequently, due to this rotary motion, electrical energy is converted into mechanical energy.

The brushless DC motor undergoes minimal wear and tear and is not much susceptible to breakage or damage owing to the absence of brushes and a physical commutator. Brushless DC motors are more reliable, have a longer life and are more efficient than brushed DC motors. Furthermore, a brushless motor can operate at speeds above 10,000 rpm in both loaded as well as unloaded conditions. Brushless DC motors generate negligible noise during operation. These advantages offered by brushless DC motors are anticipated to propel the brushless DC motors segment during the forecast period.

A stepper motor or a step motor is a brushless, synchronous motor which divides an entire rotation in a number of steps. Traction motors are a type of electric motor that are primarily utilized in battery electric vehicles (BEV) and hybrid electric vehicles (HEV). Increasing demand for electrification of vehicles for the last few years is expected to fuel the traction motors segment during the forecast period.

Based on vehicle type, the automotive motor market can be divided into passenger vehicles, commercial vehicles, and electric vehicles. The electric vehicles segment can be further sub-divided into battery electric vehicles (BEVs), plug-in electric vehicles (PEVs), and hybrid electric vehicles (HEVs). The commercial vehicles segment can be further sub-segmented into light commercial vehicles (LCVs), heavy commercial vehicles (HCVs), and buses & coaches. The passenger vehicles segment is likely to expand at a considerable growth rate during the forecast period owing to the rising production volumes of passenger vehicles across the globe during the forecast period.

Based on sales channel, the automotive motor market is classified as OEM (original equipment manufacturer) and aftermarket. The aftermarket segment is expected to witness fastest growth during the forecast period owing to the need to replace the motor after certain periods of time due to prolonged use.

Based on application, the automotive motor market can be segregated into performance motors, safety motors, and comfort motors. The safety motors segment is anticipated to expand at a significant growth rate during the forecast period owing to the increasing rules and regulations being laid down by governments regarding incorporation of safety systems in vehicles, primarily in Europe and North America.

Based on geographical region, the automotive motor market can be segmented into North America, Europe, Asia Pacific, Latin America, and Middle East & Africa. Asia Pacific is expected to dominate the automotive motor market during the forecast period owing to the rapidly increasing production volume of vehicles in the region, increasing efforts being undertaken by OEMs and the government in China to develop and introduce electric vehicles on the road, and the strong presence of key vehicle manufacturers in countries of Asia Pacific such as China, Japan, and South Korea.

Key players operating in the automotive motor market include Robert Bosch GmbH, Continental AG, Nidec Corporation, DENSO CORPORATION, Johnson Electric, Mitsuba Corp., IFB Automotive Private Limited, and Panasonic Corporation.

The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.

The study is a source of reliable data on:

  • Market segments and sub-segments
  • Market trends and dynamics
  • Supply and demand
  • Market size
  • Current trends/opportunities/challenges
  • Competitive landscape
  • Technological breakthroughs
  • Value chain and stakeholder analysis

The regional analysis covers:

  • North America (U.S. and Canada)
  • Latin America (Mexico, Brazil, Peru, Chile, and others)
  • Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
  • Eastern Europe (Poland and Russia)
  • Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
  • Middle East and Africa (GCC, Southern Africa, and North Africa)

The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.

A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.

Highlights of the report:

  • A complete backdrop analysis, which includes an assessment of the parent market
  • Important changes in market dynamics
  • Market segmentation up to the second or third level
  • Historical, current, and projected size of the market from the standpoint of both value and volume
  • Reporting and evaluation of recent industry developments
  • Market shares and strategies of key players
  • Emerging niche segments and regional markets
  • An objective assessment of the trajectory of the market
  • Recommendations to companies for strengthening their foothold in the market   

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

This study by TMR is all-encompassing framework of the dynamics of the market. It mainly comprises critical assessment of consumers' or customers' journeys, current and emerging avenues, and strategic framework to enable CXOs take effective decisions.

Our key underpinning is the 4-Quadrant Framework EIRS that offers detailed visualization of four elements:

  • Customer Experience Maps
  • Insights and Tools based on data-driven research
  • Actionable Results to meet all the business priorities
  • Strategic Frameworks to boost the growth journey

The study strives to evaluate the current and future growth prospects, untapped avenues, factors shaping their revenue potential, and demand and consumption patterns in the global market by breaking it into region-wise assessment.

The following regional segments are covered comprehensively:

  • North America
  • Asia Pacific
  • Europe
  • Latin America
  • The Middle East and Africa

The EIRS quadrant framework in the report sums up our wide spectrum of data-driven research and advisory for CXOs to help them make better decisions for their businesses and stay as leaders.

Below is a snapshot of these quadrants.

1. Customer Experience Map

The study offers an in-depth assessment of various customers’ journeys pertinent to the market and its segments. It offers various customer impressions about the products and service use. The analysis takes a closer look at their pain points and fears across various customer touchpoints. The consultation and business intelligence solutions will help interested stakeholders, including CXOs, define customer experience maps tailored to their needs. This will help them aim at boosting customer engagement with their brands.

2. Insights and Tools

The various insights in the study are based on elaborate cycles of primary and secondary research the analysts engage with during the course of research. The analysts and expert advisors at TMR adopt industry-wide, quantitative customer insights tools and market projection methodologies to arrive at results, which makes them reliable. The study not just offers estimations and projections, but also an uncluttered evaluation of these figures on the market dynamics. These insights merge data-driven research framework with qualitative consultations for business owners, CXOs, policy makers, and investors. The insights will also help their customers overcome their fears.

3. Actionable Results

The findings presented in this study by TMR are an indispensable guide for meeting all business priorities, including mission-critical ones. The results when implemented have shown tangible benefits to business stakeholders and industry entities to boost their performance. The results are tailored to fit the individual strategic framework. The study also illustrates some of the recent case studies on solving various problems by companies they faced in their consolidation journey.

4. Strategic Frameworks

The study equips businesses and anyone interested in the market to frame broad strategic frameworks. This has become more important than ever, given the current uncertainty due to COVID-19. The study deliberates on consultations to overcome various such past disruptions and foresees new ones to boost the preparedness. The frameworks help businesses plan their strategic alignments for recovery from such disruptive trends. Further, analysts at TMR helps you break down the complex scenario and bring resiliency in uncertain times.

The report sheds light on various aspects and answers pertinent questions on the market. Some of the important ones are:

1. What can be the best investment choices for venturing into new product and service lines?

2. What value propositions should businesses aim at while making new research and development funding?

3. Which regulations will be most helpful for stakeholders to boost their supply chain network?

4. Which regions might see the demand maturing in certain segments in near future?

5. What are the some of the best cost optimization strategies with vendors that some well-entrenched players have gained success with?

6. Which are the key perspectives that the C-suite are leveraging to move businesses to new growth trajectory?

7. Which government regulations might challenge the status of key regional markets?

8. How will the emerging political and economic scenario affect opportunities in key growth areas?

9. What are some of the value-grab opportunities in various segments?

10. What will be the barrier to entry for new players in the market?

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

Custom Market Research Services

TMR offers custom market research services that help clients to get information on their business scenario required where syndicated solutions are not enough.

REQUEST CUSTOMIZATION

Automotive Motors Market

Pre Book