Get In Touch

In electric vehicles, the electric engine is driven by an electric motor. The electric motor is used for the propulsion of the vehicle. In electric engine, battery is used for electric power. Electric power is supplied to the electric motor. Motor helps to convert that electric power into the mechanical output, which is supplied to the axle of electric vehicle.

Rising demand for electric vehicles and the increasing efforts being undertaken by OEMs as well as governments of various nations to develop and implement electric vehicles on the road are expected to drive the automotive electric engine market during the forecast period. Stringent rules and regulations implemented by the governments of various countries across the world in order to reduce vehicular emissions is anticipated to further boost the automotive electric engine market in the near future.

Moreover, using high-horsepower motors in applications where they are run infrequently can result in costly electrical demand charges which results in a high cost per hour of operation. These minor drawbacks of electric motors are expected to hamper the growth of the automotive electric engine market during the forecast period.

Based on the type of motor, the automotive electric engine market can be segmented into DC motor and AC motor. Currently, DC motor is most commonly utilized to drive the electric engine in electric vehicles. This is primarily due to the numerous benefits offered by the DC motor over the AC motor, such as simple installation and low cost. This is expected to propel the automotive electric engine market during the forecast period.

The DC motor offers several advantages over the AC motor in an electric engine; however the DC motor tends to overheat after excessive overriding. This is estimated to pose serious issues related to safety and security of the driver. In view of this, electric vehicles powered by an AC motor have been developed by Tesla and Nissan. Electric vehicles powered by an AC motor are more expensive than electric vehicles powered by a DC motor, since an AC motor contains a speed control circuitry. However compared to a DC motor, an AC motor is safer and simpler to install on the electric vehicles. While a DC motor can short-circuit the entire battery pack and catch fire, an AC inverter simply fails and the car stops. This is expected to boost the AC motor segment toward the end of the forecast period when the electric vehicle market reaches the maturity stage.

Based on vehicle type, the automotive electric engine market can be classified into BEV (battery electric vehicle), PEV (plug-in electric vehicle) and HEV (hybrid electric vehicle). Based on vehicle type, the HEV segment is expected to witness considerable growth during the forecast period since HEV combines a conventional internal combustion engine (ICE) with an electric propulsion system. The electric propulsion system is intended to achieve fuel efficiency and better vehicle performance.

 Based on type of drive motor, the automotive electric engine market can be segregated into commutator motor and commutator-less motor. The commutator motor segment is further sub-segmented into self-excited and separately-excited. The self-excited motor can be further split into series motor and shunt motor. While, the separately-excited drive motor can be further classified into field excited and PM excited. The commutator-less motor segment can be further sub-segmented into induction motor, synchronous motor, PM brushless motor, switched reluctance motor, and PM motor.

Based on geographical region, the automotive electric engine market can be segmented into North America, Europe, Asia Pacific, Latin America, and Middle East & Africa. The automotive electric engine market in Asia Pacific is expected to expand at a significant growth rate during the forecast period, owing to the increasing production of electric vehicles in China and the increasing efforts being undertaken by both vehicle manufacturers and the government of China in order to develop and implement electric vehicles in the country.

Key players operating in the global automotive electric engine market include ABB, AMETEK. INC., Arc Systems Inc., ASMO CO., LTD., Baldor Electric Company, Emerson Electric Co., and FAULHABER GROUP.

The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.

The study is a source of reliable data on:

  • Market segments and sub-segments
  • Market trends and dynamics
  • Supply and demand
  • Market size
  • Current trends/opportunities/challenges
  • Competitive landscape
  • Technological breakthroughs
  • Value chain and stakeholder analysis

The regional analysis covers:

  • North America (U.S. and Canada)
  • Latin America (Mexico, Brazil, Peru, Chile, and others)
  • Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
  • Eastern Europe (Poland and Russia)
  • Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
  • Middle East and Africa (GCC, Southern Africa, and North Africa)

The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.

A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.

Highlights of the report:

  • A complete backdrop analysis, which includes an assessment of the parent market
  • Important changes in market dynamics
  • Market segmentation up to the second or third level
  • Historical, current, and projected size of the market from the standpoint of both value and volume
  • Reporting and evaluation of recent industry developments
  • Market shares and strategies of key players
  • Emerging niche segments and regional markets
  • An objective assessment of the trajectory of the market
  • Recommendations to companies for strengthening their foothold in the market   

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

This study by TMR is all-encompassing framework of the dynamics of the market. It mainly comprises critical assessment of consumers' or customers' journeys, current and emerging avenues, and strategic framework to enable CXOs take effective decisions.

Our key underpinning is the 4-Quadrant Framework EIRS that offers detailed visualization of four elements:

  • Customer Experience Maps
  • Insights and Tools based on data-driven research
  • Actionable Results to meet all the business priorities
  • Strategic Frameworks to boost the growth journey

The study strives to evaluate the current and future growth prospects, untapped avenues, factors shaping their revenue potential, and demand and consumption patterns in the global market by breaking it into region-wise assessment.

The following regional segments are covered comprehensively:

  • North America
  • Asia Pacific
  • Europe
  • Latin America
  • The Middle East and Africa

The EIRS quadrant framework in the report sums up our wide spectrum of data-driven research and advisory for CXOs to help them make better decisions for their businesses and stay as leaders.

Below is a snapshot of these quadrants.

1. Customer Experience Map

The study offers an in-depth assessment of various customers’ journeys pertinent to the market and its segments. It offers various customer impressions about the products and service use. The analysis takes a closer look at their pain points and fears across various customer touchpoints. The consultation and business intelligence solutions will help interested stakeholders, including CXOs, define customer experience maps tailored to their needs. This will help them aim at boosting customer engagement with their brands.

2. Insights and Tools

The various insights in the study are based on elaborate cycles of primary and secondary research the analysts engage with during the course of research. The analysts and expert advisors at TMR adopt industry-wide, quantitative customer insights tools and market projection methodologies to arrive at results, which makes them reliable. The study not just offers estimations and projections, but also an uncluttered evaluation of these figures on the market dynamics. These insights merge data-driven research framework with qualitative consultations for business owners, CXOs, policy makers, and investors. The insights will also help their customers overcome their fears.

3. Actionable Results

The findings presented in this study by TMR are an indispensable guide for meeting all business priorities, including mission-critical ones. The results when implemented have shown tangible benefits to business stakeholders and industry entities to boost their performance. The results are tailored to fit the individual strategic framework. The study also illustrates some of the recent case studies on solving various problems by companies they faced in their consolidation journey.

4. Strategic Frameworks

The study equips businesses and anyone interested in the market to frame broad strategic frameworks. This has become more important than ever, given the current uncertainty due to COVID-19. The study deliberates on consultations to overcome various such past disruptions and foresees new ones to boost the preparedness. The frameworks help businesses plan their strategic alignments for recovery from such disruptive trends. Further, analysts at TMR helps you break down the complex scenario and bring resiliency in uncertain times.

The report sheds light on various aspects and answers pertinent questions on the market. Some of the important ones are:

1. What can be the best investment choices for venturing into new product and service lines?

2. What value propositions should businesses aim at while making new research and development funding?

3. Which regulations will be most helpful for stakeholders to boost their supply chain network?

4. Which regions might see the demand maturing in certain segments in near future?

5. What are the some of the best cost optimization strategies with vendors that some well-entrenched players have gained success with?

6. Which are the key perspectives that the C-suite are leveraging to move businesses to new growth trajectory?

7. Which government regulations might challenge the status of key regional markets?

8. How will the emerging political and economic scenario affect opportunities in key growth areas?

9. What are some of the value-grab opportunities in various segments?

10. What will be the barrier to entry for new players in the market?

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

Custom Market Research Services

TMR offers custom market research services that help clients to get information on their business scenario required where syndicated solutions are not enough.


Automotive Electric Engine Market

Pre Book