The market for aerospace bearings is heavily driven by the increased demand for aircraft deliveries. Air traffic is growing in developed as well as developing nations which is leading to enhanced demand for more aircrafts. This has led aircraft manufacturers as well as aircraft engine manufacturers to procure bearings at a faster rate than before. Moreover, the need to modernize the older aircrafts with new, reliable, and latest technologies is also encouraging manufacturers to upgrade the older aircrafts with advanced bearing, which in turn is fueling the market for aerospace bearing.

The growth of aerospace bearings market is affected by the steep cost of raw materials. Engineered plastic, stainless steel, and alloys are extremely costly due to their various capabilities which increase the cost of the products. This in turn is increasing the cost of the final bearing which is limiting aircraft manufacturers’ and aircraft engine manufacturers from procuring these advanced material bearings, thus restraining the growth of the bearings market in the aerospace industry. Moreover, maintenance of these bearings is also high which is another factor negatively impacting the market for aerospace bearing.

The market for aerospace bearing is estimated to witness significant growth over the years due to the increased use of fiber reinforced composites bearings. These bearings are capable of carrying heavy loads and are self-actuating, which is increasing the interest among bearing manufacturers. Owing to the capability of carrying heavier loads compared to stainless steel and aluminum alloys bearing, aircraft manufacturers and aircraft engine manufacturers are heavily procuring fiber reinforced composites. This move by manufactures of aircrafts as well as aircraft engines is anticipated to boost the market for aerospace bearing.

The market for aerospace bearing is segmented on basis of product types, application, material, aircrafts, and geography. The various types of aerospace bearing includes roller, ball bearing and others. The different roller bearing includes cylindrical roller bearing, needle roller bearing, tapered roller bearing, and self-actuating roller bearing. Among the different types of roller bearing, the cylindrical roller bearing is the most widely used bearing in the aerospace bearing market. The roller bearing captured the market and is anticipated to surge over the period at a faster rate due to varied application in the aerospace industry.

Based on application, the market for aerospace bearing is categorized as aerostructure, flight control surfaces, engine, landing gear and others. Rapid growth in air traffic across the globe has increased the demand for latest aircraft engines which in turn has increased the requirement for bearings among the engine manufacturers. Owing to this fact, the engine segment held the largest market share and is estimated to retain its dominance. The materials used to manufacture bearings for aerospace industry includes stainless steel, fiber reinforced composites, metal backed, aluminum alloys, engineered plastics and others. The stainless steel segment held the largest share due to the capability of sustaining any condition or temperature. However, fiber reinforced composites are capable of carrying heavy load and are self-lubricating. Owing to this capability, manufacturers are increasingly opting for fiber reinforced composite bearing for the aerospace industry. The various types of aircraft operating in the aerospace industry are narrow body aircrafts, wide body aircrafts, very large body aircrafts, fighter jets, business jets, and helicopters. Geographically, the market for aerospace bearings is segmented on basis of five strategic regions globally, namely North America, Europe, Asia Pacific, Middle East and Africa, and Latin America. The market for aerospace bearings is dominated by North America followed by Europe.

The top players operating in the market for aerospace bearing are AST Bearing LLC (U.S), JTEKT Corporation (Japan), SKF Group (U.S), GGB Bearing Technology (France), RBC Bearing Inc. (U.S), NSK Ltd. (Japan), The Timken Company (U.S), Aurora Bearing Company (U.S), National Bearing Precision (U.S), and NTN Corporation (Japan).

The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.

The study is a source of reliable data on:

  • Market segments and sub-segments
  • Market trends and dynamics
  • Supply and demand
  • Market size
  • Current trends/opportunities/challenges
  • Competitive landscape
  • Technological breakthroughs
  • Value chain and stakeholder analysis

The regional analysis covers:

  • North America (U.S. and Canada)
  • Latin America (Mexico, Brazil, Peru, Chile, and others)
  • Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
  • Eastern Europe (Poland and Russia)
  • Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
  • Middle East and Africa (GCC, Southern Africa, and North Africa)

The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.

A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.

Highlights of the report:

  • A complete backdrop analysis, which includes an assessment of the parent market
  • Important changes in market dynamics
  • Market segmentation up to the second or third level
  • Historical, current, and projected size of the market from the standpoint of both value and volume
  • Reporting and evaluation of recent industry developments
  • Market shares and strategies of key players
  • Emerging niche segments and regional markets
  • An objective assessment of the trajectory of the market
  • Recommendations to companies for strengthening their foothold in the market    

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

This study by TMR is all-encompassing framework of the dynamics of the market. It mainly comprises critical assessment of consumers' or customers' journeys, current and emerging avenues, and strategic framework to enable CXOs take effective decisions.

Our key underpinning is the 4-Quadrant Framework EIRS that offers detailed visualization of four elements:

  • Customer Experience Maps
  • Insights and Tools based on data-driven research
  • Actionable Results to meet all the business priorities
  • Strategic Frameworks to boost the growth journey

The study strives to evaluate the current and future growth prospects, untapped avenues, factors shaping their revenue potential, and demand and consumption patterns in the global market by breaking it into region-wise assessment.

The following regional segments are covered comprehensively:

  • North America
  • Asia Pacific
  • Europe
  • Latin America
  • The Middle East and Africa

The EIRS quadrant framework in the report sums up our wide spectrum of data-driven research and advisory for CXOs to help them make better decisions for their businesses and stay as leaders.

Below is a snapshot of these quadrants.

1. Customer Experience Map

The study offers an in-depth assessment of various customers’ journeys pertinent to the market and its segments. It offers various customer impressions about the products and service use. The analysis takes a closer look at their pain points and fears across various customer touchpoints. The consultation and business intelligence solutions will help interested stakeholders, including CXOs, define customer experience maps tailored to their needs. This will help them aim at boosting customer engagement with their brands.

2. Insights and Tools

The various insights in the study are based on elaborate cycles of primary and secondary research the analysts engage with during the course of research. The analysts and expert advisors at TMR adopt industry-wide, quantitative customer insights tools and market projection methodologies to arrive at results, which makes them reliable. The study not just offers estimations and projections, but also an uncluttered evaluation of these figures on the market dynamics. These insights merge data-driven research framework with qualitative consultations for business owners, CXOs, policy makers, and investors. The insights will also help their customers overcome their fears.

3. Actionable Results

The findings presented in this study by TMR are an indispensable guide for meeting all business priorities, including mission-critical ones. The results when implemented have shown tangible benefits to business stakeholders and industry entities to boost their performance. The results are tailored to fit the individual strategic framework. The study also illustrates some of the recent case studies on solving various problems by companies they faced in their consolidation journey.

4. Strategic Frameworks

The study equips businesses and anyone interested in the market to frame broad strategic frameworks. This has become more important than ever, given the current uncertainty due to COVID-19. The study deliberates on consultations to overcome various such past disruptions and foresees new ones to boost the preparedness. The frameworks help businesses plan their strategic alignments for recovery from such disruptive trends. Further, analysts at TMR helps you break down the complex scenario and bring resiliency in uncertain times.

The report sheds light on various aspects and answers pertinent questions on the market. Some of the important ones are:

1. What can be the best investment choices for venturing into new product and service lines?

2. What value propositions should businesses aim at while making new research and development funding?

3. Which regulations will be most helpful for stakeholders to boost their supply chain network?

4. Which regions might see the demand maturing in certain segments in near future?

5. What are the some of the best cost optimization strategies with vendors that some well-entrenched players have gained success with?

6. Which are the key perspectives that the C-suite are leveraging to move businesses to new growth trajectory?

7. Which government regulations might challenge the status of key regional markets?

8. How will the emerging political and economic scenario affect opportunities in key growth areas?

9. What are some of the value-grab opportunities in various segments?

10. What will be the barrier to entry for new players in the market?

Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.

Custom Market Research Services

TMR offers custom market research services that help clients to get information on their business scenario required where syndicated solutions are not enough.

REQUEST CUSTOMIZATION

Aerospace Bearings Market

Pre Book